traveller rpg yacht

Sunday, August 20, 2017

Destiny class 200 ton yacht - additional images.

This is an awesome design, I like everything about it.

• Skip to content
• Skip to menu

Traveller Illustrated

Illustrations of Classic Traveller Starships 

Nov 21 2014

Starship – 200ton JG Safari Ship (WIP)

Judges guild 200ton safari 234 class by kzm industries.

The Simba Safari is one of the Safari 234 Class built by KZM Industries on Warlock (Ley – 0529). It has numerous special features designed for the Out Hunter. The hull form is a wedge shaped, streamlined, lifting body, easily maneuverable in an atmosphere. The Safari Class is designed for landings in rough terrain with specially strengthened support gear. Capable of 1 G accelleration and Jump 2, this vessel is fitted with fuel scoops and a purification plant for it’s 50 tons of fuel. The bridge is eqipped with control stations for four; pilot, navigator, engineer, and gunner. The computer installed is a Model/1 bis with standard software package. A double turret is installed on the single hardpoint, mounting a SandCaster and a Beam Laser. Auxiliary vehicles comprise an internally stowed 4-ton air/raft and a dorsally mounted 20ton Launch/Lifeboat. Two tons are reserwed for cargo, with special cages fitted to hold 10 and 13 tons respectively. Interior fittings are of high quality, and the living quarters are especially luxurious.

The first ship of it’s Class carries the name „Starflame Safari“, others carry the name of memorable adventures/ safaris/ journeys: e.g. Rubesa Patrol, Nebula Rover, Dawn Trek, Rimward Run, Wilderness Wanderer, or like this vessel Simba Safari.

My self declared mission is to model all the iconic CT starships. Of course I want to portray a few that haven’t been covered by other artists in much detail before, such as this little beauty. The Safari 234 Class 200dt Judges Guild Safari Ship was featured in the supplement Simba Safari published by Judges Guild and now re-published in PDF form by GDW aka Far Future Enterprises on DriveThruRPG.com.

 The image shows the ship with extracted wings and closed pop.up turret.

Continue reading „Starship – 200ton JG Safari Ship (WIP)“

Kommentare deaktiviert für Starship – 200ton JG Safari Ship (WIP)

Nov 07 2014

Starship – 2000ton Type-TI Frontier Transport

General information.

Using a 2000-ton, TL15 hull, the Type-TI_v0-5 Class Transport mounts jump drive-V, maneuver drive-V, and power plant-V, giving a performance of jump-2 and 2G acceleration. Fuel tankage supports a 2 parsec jump, at 200t per parsec, and 2 months of operations. Attached to the bridge are two Computer Model/5 std. There are 12 staterooms and 5 low berths. Installed weaponry include 3 T3 Missiles, 3 T3 Fusion Guns, and 4 T3 Sandcasters. The ship does not have cargo space. The ship has a streamlined hull, with scoops and intakes for frontier refueling.

Carried craft include 1 Cargo Shuttle, 1 Air/Raft Enclosed, and 1 Grapple Set Triple. The ship has 20 crew (3 bridge crew, 2 engineers, 12 gunners, 2 auxiliary flight crew, and 1 medic) but can be technically operated by 6 crew, and can carry 5 low passengers.

This craft is an adaption for the TI that I think is feasible IMTU, given the fact tha this is a company owned transport. The original ship had 12 Staterooms with double occupancy for all but command crew and a total crew of 20 (1 Bridge, 2 Engineer, 10 Gunnery, 2 Flight, 2 Troops, 2 Command, 1 Medic). It aso featured a nuclear damper and EM hardening. I will likely put some more work into the craft.

The MT version had triple Model/9 computers which woud add about MCr 250 to the standard design. Way too much. I believe I can live with two Model/5 bis computers but it wouldn’t be the same design. The MT Type-TI in TRaveller 5 would cost nearly as much as the Type-TJ.

Short info on the Traveller Wiki: Type-TI | Type-TJ

Deckplans found on the Inter-web

Continue reading „Starship – 2000ton Type-TI Frontier Transport“

Kommentare deaktiviert für Starship – 2000ton Type-TI Frontier Transport

Nov 06 2014

Starship – 300ton Star Class Armored Merchant

300dt armored merchant.

Using a 300-ton, TL12 hull, the Star v0.4 Class Armored Merchant mounts jump drive-E, maneuver drive-B, and power plant-E, giving a performance of jump-3 and 1G acceleration. Fuel tankage supports a 3 parsec jump, at 30t per parsec, and one month of operations. Attached to the bridge is a Computer Model/2bis std. There are 13 staterooms and 10 low berths. Installed weaponry include 1 T3 Missile, and 2 T3 Beam Lasers. Cargo capacity is 46 tons. The ship has a streamlined hull, with scoops for frontier refueling. The ship carries 1 Air/Raft Enclosed. The ship has 6 crew, and can carry 8 passengers and 10 low passengers.

Rhaan Interstellar Corp – 300dt Star Class Armored Merchant „Solar Flare“

I already modeled the ship some time ago and I think it came out very nicely. The one thing I am sure William H. Keith, Jr. would have done differently is the windows (there are Bill Kieth styled windows in a lot of Traveller starship images. If you’re interested I made a ship with two variants, one of which depicts this style.

My friend Bill Connors asked me if he could play with the model and I think he did a great job. So good that it put this ship off my priority list of starships „to texture“. See:

Aslan Nebula by AbaKon on deviantART

Starbound by AbaKon on deviantART

Armored Merchant WIP 05

Continue reading „Starship – 300ton Star Class Armored Merchant“

Kommentare deaktiviert für Starship – 300ton Star Class Armored Merchant

Nov 05 2014

Starship – 1000ton Tukera Long Liner

100odt tukera long liner.

Using a 1000-ton streamlined hull, the Tukera Long Liner is a main-route passenger transport serving much of the Imperium. It mounts a  jump drive V,  maneuver drive E, and power plant V to supply power for one month of continuous operation, giving performance of Jump-4 and 1G acceleration. Fuel tankage supports a month of operations and one jump-4. On the bridge is a Model/4 computer. There are 50 staterooms and 5 emergency low berths. The ship has five hardpoints. Only one triple turret is usually installed; it carries a heterogeneous mix of one beam laser, one missile rack, and one sandcaster. The ship carries one vehicle: a 20-ton launch, grappled to the hull. Cargo capacity for the long-liner is 130 tons.

Scan from The Traveller Adventure, (c) FFE

The Long Liner requires a crew of 13: captain/pilot, astrogator, 6 engineers, medic, 3 stewards, and gunner. The pilot or astrogator operates the launch. The ship can carry up to 36 passengers.

Deckplan found on the Inter-webs

Image found on the Inter-webs

Design specs by Robert Eaglestone

Kommentare deaktiviert für Starship – 1000ton Tukera Long Liner

Jun 18 2013

Starships – Type CM (Mercenary Cruiser) – HS33 Yamal

My attempt to convert a RiftRoamers RPG (RR) original starship to Traveller. The craft was downsized as ships in RR tend to be larger in general. The appropriate size would have been 1200 tons in RR. However that would have been just another Kinunir which was not my intention.

The ship is designed following Traveller5 rules by using the Traveller5 ACS Shipyard (an online ship-design software for T5 by Robert Eaglestone)

Mercenary Cruiser CM-HS33 Yamal MCr353.9 [General Shipyards] Owner: Rhaan Industries Disposition: In Service

The 800 ton Streamlined Yamal Class Merc Cruiser is a variant of the Broadsword built as an alternative to the Broadsword Merc Cruiser. It’s outer appearance loosely copies the lines of patrol corvette, while being larger of course.

Design requirements: 1 Modular Cutter  (in an external cradle mount accessible through the cargo bay), 2 additional Cutter modules  (in an external cradle mount accessible through the cargo bay), 2 20dt Gigs (in an external cradle mount accessible by special connection tubes), 2 Grav carriers (Lopec or Resolve carried aboard cutter modules, these craft show as overtonnage in the design).

Blocking out the major features in Blender

The design now features Maneuver 3, Jump 3, 3 Month of Powerplant operation and offers 95 tons of cargo space in addition to all the vehicles.

The Image below show the vessels’s Cutter and one of the thre special Container Modules.

Click on the link below to continue with the stats and later with the deck plans too.

Rescued article from old website. Unfortunately the second page is currently not available. It will return though.

Continue reading “Starships – Type CM (Mercenary Cruiser) – HS33 Yamal”

Comments (0) Starships – Type CM (Mercenary Cruiser) – HS33 Yamal Category: 3D-Model,IMTU,Mercenary Cruiser,Starship,Traveller,WIP — admin @ 16:00 Jun 18 2013

Schlagwörter: Container , Merc Cruiser , Mercenary Cruiser , Modular Cutter , module

Kommentare deaktiviert für Starships – Type CM (Mercenary Cruiser) – HS33 Yamal

Jan 24 2013

Starship – 400dton Donosev Class ISV (WIP)

The survey scout is a typical ship in service with the Imperial Interstellar Scout Service. Its function is to continually re-survey the interior regions of the Imperium, updating maps and charts, and maintaining beacons and markers for astrogation hazards.  The ship essentially serves much the same role as a modern day coast guard seagoing buoy tender, offshore supply vessel or ice breaker (or any combination thereof).

The ship is catagorised as Type SZ, or “Scout Experimental”, and in fact three different versions of this ship have been built.

The most recent, was the result of improvements to sensor placement made during the Second Survey and was producved in two variants. The Donosev Class Interstellar Survey Vessel was named after Master Chief Surveyor Villemina Donosev. Individual ships are named for famous scouts in the Imperial service.

As is the case with most modern Scout vessels, the Donosev-class is not equipped for use in hostile areas. The survey scout is a peaceful vessel, typically unarmed and inoffensive. It does, however, mount four hardpoints and can be armed with a variety of turrets and weaponry if necessary. The Donosev class survey scout is named for famous scouts in the Imperial service.

The Donosev ISV2 with three Air/Raft Hangarbays and the Modular Cutter undocked

This is probably the one ship that is truly asymmetrical in shape among the Traveller starships and possibly because of this it was not very highly regarded amongs players I used to play Traveller with. However, I liked the old Donno because it is the perfect base ship for a medium crew.

I plan to model two variants. One variant I call the ISV2 with three Hurricane Air/Rafts and the one variant I call ISV1 with a Kankurur Grav Carrier in a single larger Hangarbay in place of the Air/Rafts. Both vehicles are depicted in DGP’s 101 Vehicles, so I’ll go from there. No idea how to fit that Kankurur into the hull though.

Please note that the designations ISV1 and ISV2 that I use in this text are non-canon and used only to differentiate the two models. Both are Donosev Class vessels.

The Donosev ISV1 with a large Hangar for the Kankurur Grav Carrier and the Modular Cutter undocked

I remeber to have read somewhere (DGP’s Grand Survey?) that the Hangar Bay of roughly a quarter of the Donosevs in service is about 2m higher and 1.5m wider but the remainder of vessel otherwise unchanged. That’s not easy to implement without outer changes on the craft, as you can’t simply go up or inward as there are are likely staterooms, corridors and laboratory spaces (as well as the brigde above the bay.

Perhaps a bulge beneath the vehicle bay to allow for the extra height and width. The render above shows my approach with the bulge beneath the command section which was widened by pushing the outer wall another 1,5m into space.

The resulting ship will be 135kl or aproximately 10dt larger in tonnage, which is or could be a problem. 410dt is well within the often cited 5% tollerance, which on the other hand was only meant to account for deckplan variance.

Just from a modeling point of view one could assume the ISV1 being at about 405dt and the ISV2 at 395dt which would account for the ten tons difference and reduce the error to plus/minus 1.25% as compared to the calculated volume of 400dt. At least I am well prepared to accept that, until I have my copy of Traveller5 which I plan to use for calculating all my Traveller ships.

The Subcraft and Vehicles

The Tech level 15 Kankurur class Scout survey Grav Carrier was commissioned in 1097 – following a design dating back to 1095 – and is equipped to support both survey and exploration missions with full crews. .  The Kankurur is a large pradtory bird native to Vland that was often trained as a courier animal capable of carrying up to 20kg of cargo in its talons. Consequently named vehicles often carry the names of significant native animals of the worlds of the Imperium.

The vehicles’ sealed environment allows forl full pressurized life support for its crew. An airlock in the aft section opens to the roof as well as aft. A galley, four fold-up bunks, and a fresher allow extended missions. On the bridge, the basic controls are computer enhanced to increase the efficency and safety of operation. EMS active and passive sensors, a neutrino sensor, and a densitometer give a full range of information to the surveyers on board. A Meson communicator allows near-instant contact with any other station within planetary range.

In addition to the crew (pilot and five operators or passengers) the grav carrier can carry 0.5 ton of cargo in the main cabin and 1.5 ton in the airlock. Unloaded, the craft weighs about 60 tons; with crew and maximum cargo it weighs about 95 tons. Top speed is at 240kph, cruise at 180kph and NOE at 190kph. The vehicle costs about 10.650.000 Cr amf displaces 11 tons. Length 15.25m, width: 8.30m, height:  7.50m.

The 50ton Modular Cutter

The Hurricane Air/Raft

The ship stats can be found here: http://www.ace-dog.co.uk/Traveller/Shipyard/DONOSEV.htm

A deckplan I found wandering through the web:   http://tahspeck.wdfiles.com/local–files/ships%3Adonosev/mod-donosev.pdf

Jesse DeGraff did one that can be seen here, here and here.

I use his progress report as reference material: http://visionforgestudios.com/jesse/traveller/donosev_progress.htm

Ian Steed did one that can be seen here: http://biomassart.files.wordpress.com/2011/02/donosev.jpg

Comments (0)

Starship – 400dton Donosev Class ISV (WIP) Category: 3D-Model,Cutter,Deckplan,Grav Carrier,Scout,Starship,Traveller,Vehicle,WIP — admin @ 18:39 Jan 24 2013

Kommentare deaktiviert für Starship – 400dton Donosev Class ISV (WIP)

• Vehicle – Kankurur G-Carrier
• Vehicle – Lopec G-Carrier
• Vehicle – Resolve G-Carrier
• Vehicle – Rivaal XC Air/Raft
• Shared Download
• Unsorted Links
• Setting out a module and ATV in 8 easy steps
• Traveller 5 – Starship List
• Starship – 500ton Corvette
• Classic Traveller Campaign
• Traveller Pioneer – Space Sim
• TravMerge – Space Sim
• VS Traveller – Space Sim
• Tin Lizzie – Charaktere
• Tin Lizzie – Profil
• Ein neuer Paint Job
• Meisterspieler: Amondiage
• Meisterspieler: Krhysiiuaw (aka Grisu)
• Meisterspieler: Uifkh’siye (aka Upsi)
• T5 Char Creation Sample
• Traveller Calendar 2013
• Traveller Calendar 2014/2015
• Traveller Calendar 2016
• Datenschutzerklärung
• Space Craft
• Starship Upgrade
• Traveller Calendar
• Traveller Art
• Updated Articles
• November 2021
• Januar 2016
• Februar 2015
• Januar 2015
• Dezember 2014
• November 2014
• Oktober 2014
• September 2013
• Januar 2013
• Januar 2009
• November 2000
• Comments RSS
• Valid XHTML

The Traveller game in all forms is owned by Far Future Enterprises. Copyright 1977 � 2012 Far Future Enterprises.

Powered by WordPress and Stardust

Created by Tommaso Baldovino

[ Freelance Traveller Home Page | Search Freelance Traveller | Site Index ]

Freelance Traveller

The Electronic Fan-Supported Traveller ® Resource

Almost anyone that travels between worlds dreams of owning their own transportation. A lucky few (in comparison) can afford to do so. Shipyards are where those few make their dreams into reality.

The Freelance Traveller shipyard is where you can find descriptions and specifications (and eventually deck plans and interior pictures, we hope) for starships and spaceships for all sorts of missions. Ultimately, as we receive additional contributions (from you, our readers), all incarnations of Traveller will be supported.

Freelance Traveller is also proud to be able to offer, free for you to download, the BITS publication 101 Starships, Seventh Edition . This document, authored by Rob Prior, contains descriptions and design worksheets for a wide range of spaceships and starships suitable for use with GURPS Traveller . Freelance Traveller has, with permission, selected a number of designs from this collection to start off this section. Additional designs from 101 Starships may be added as time permits, but we encourage you to download the PDF document to enjoy the entire set immediately.

• Bargam class Tramp Trader (Rob Prior)
• Cardos class Fast Yacht (Rob Prior)
• Irbak class System Defense Boat (Rob Prior)

In addition to the designs from 101 Starships listed above, you can find more GURPS Traveller designs here at Freelance Traveller's shipyard.

We aren't neglecting Classic Traveller , MegaTraveller , Traveller: The New Era , Marc Miller's Traveller (T4) , Traveller20 , or Mongoose Traveller designs either.

The following designs don't appear to fit into any of our other classifications, or are supplied in for multiple rule sets:

• President -class Holiday Cruiser (Michael Gilliam)
• Chukkar -class Modular Merchant (John T. Kwon)
• Running Ox -class Merchant (Bruce Johnson)
• Pawel -class Modular Cutter (Ewan Quibell)
• Vagrant -class X-Boat Service Hull (Donovan Lambertus)
• Gas Giant Refueling/Refining Platform and Lighter (Scott Diamond)
• Naklaad -class Interface Merchant (Timothy Collinson)
• Ray -class Subsidized Liner (Jim Kundert)
• Repair Tugs (Joshua Levy)
• Medical Transport/Evacuation Shuttles (Edward Anderson)
• Chort -class Shuttle (Neil Lucock)
• Junco -class Trader (Jo Jaquinta)
• Longsword, Kanin, and Krupny -class Destroyer Variants
• Venetian -class Escort Carrier
• Worcester and Mogami -class Cruisers and Variants
• Les Torpilleurs -class Missile Warship and SDB
• Grand Torpilleurs -class Heavy Torpedo Boat
• Essex and Independence -class Fighter Carriers and Variants
• Fram , Burke , and Foible -class Destroyers and Variants

Articles on ship-design-related topics:

• Deck Cargo: Using External Pods for Increasing Cargo Capacity (Ken Pick)
• The Lyman Drive: An Alternative to the Standard Jump Drive (Jeff Zeitlin)
• Missile Magazines for High Guard (Joseph Kimball)
• Plantier Shields: An Alternative to Black Globes (Ken Pick)
• What Is Tonnage? (Ken Pick)
• On the Naming of Ships (Ken Pick)
• Commercial Efficiency Analysis of Selected Starships (Ken Pick)
• Beyond Book 2: Expanding the Basic Classic Traveller Starship Design System (Ken Pick)
• Ship Structure and Hull Size Limitations (Christopher Thrash)
• A Starship Design Tutorial (Peter Gray) Beginning Design Advanced Design
• Densified Fuel Storage (Alex Goodwin)
• Building Bridges (Jared Noble)
• Drawing Deck Plans With Campaign Cartographer 2 Pro (Randy Tyler)
• Imperial Naval Doctrine (Kevin Walsh)
• Solomani Naval Doctrine (Kevin Walsh)
• Naval Doctrine and Tech Level (Ken Pick)
• Collapsible Fuel Tanks and Jump Drives "On Rails" (Joshua Levy)

The Ship's Locker - an eclectic collection of ... stuff.

The Starship Technical Manual (Terry Carlino)

101 Starships is in Adobe Acrobat (PDF) format, and is 4305K to download. You will need Adobe Acrobat or Adobe Acrobat Reader to view. Acrobat Reader can be downloaded free from Adobe's web site, http://www.adobe.com .

Traveller Core Rulebook

Please note that this title has now been effectively replaced with the  Traveller Core Rulebook Update 2022 .

This is Free Trader Beowulf, calling anyone...   Mayday, Mayday...We are under attack...   Main drive is gone...Turret number one not responding...   Mayday...Losing cabin pressure fast calling anyone...   Please help...This is Free Trader Beowulf...   ...Mayday...

A brand new edition of Traveller is now available - based on the original but tweaked, finessed and updated through a massive months-long beta playtest by you, the players!   

Traveller is a science fiction roleplaying game of bold explorers and brave adventurers. The Traveller Core Rulebook contains everything you need to create one of these adventurers and begin exploring the galaxy.

Spaceports, ancient civilisations, air/rafts, cold steel blades, laser carbines, far distant worlds, and exotic alien beasts – this is the futuristic universe of Traveller, the original and classic science fiction roleplaying game.

Come visit the future.

This digital edition includes the full colour Traveller Core Rulebook , a black and white printer-friendly version, and a PDF of 2D versions of deck plans for all the ships included in this title.

Traveller RPG Starship Miniatures

Created by 2ndDynasty

This campaign is finished.

• Pledges (6)
• Add-ons (30)
• View on Kickstarter

Starship Miniatures

218 backers

Includes 2 products

Traveller Starship Miniatures Stretch Goals

These are the stretch goals unlocked during our Traveller Starship Miniatures Campaign. Each has a 1:270 version and a Tactical version, including versions for FDM prints or SLA prints (including supports).

Vessels Included:

• Type A2 Far Trader
• Type E Corvette
• Type R Subsidized Merchant
• Type SD Dragon System Defence Boat
• Type K Safari
• Type GE Gunned Escort
• Type L Laboratory Ship
• Armed Packet
• Gunned Escort Gig
• Type Y Yacht
• Hiver Explorer
• Donosev Science Ship
• Solomani Trader
• Ninz Zhodani Scout
• Type J Seeker
• Beta Centauri
• Type J Seeker (Murphy/2nd Dynasty Version)
• Type S Scout with Winglets and Snub Nose (Murphy/2nd Dynasty Version)

Traveller Starship Miniatures

The star of this campaign is our brand new official Traveller Starship Miniatures. The initial release includes a total of 14 starships, seven each in two different scales. The ships, which featured most prominently in the Traveller5 Role-Playing Game are based on the works of Ian Stead and have been beautifully rendered in 3D printable form.

We have designed the starship miniatures to use two scales.

The first, 1:270 scale, was popularised by the X-Wing tabletop dogfighting game, and these versions of the ships are scaled to each other. They make for great display pieces, and while large on the table, are not so large as to be impractical.

The second scale is Tactical scale, which scales the ships down to fit on a 1 inch hex base stand. The miniatures are not in scale to each other, but these are of a practical size to be played on a one-inch hex map for tactical combat.

 The core ships feature a variety of popular classic Traveller designs, all originally visualised by Ian Stead, aside from our own Murphy-class Type S Scout/Courier (both versions of the Type S have been provided for collectors). From merchant vessels to system patrol boats and mercenary cruisers, they range in size from 100 to 800 tons (as per the Traveller rules).

All-In on Starship Miniatures

Includes 9 products

Cerberus Starship Miniatures

Get the Chimera Cerberus starship in 1:270 and Tactical scale. This was a standalone variant of the Chimera series that we featured back in Starship V alongside the Sleipnir. Includes

• Cerberus Starship Miniature STL Files

Pegasus Starship Miniatures

Get the Chimera Pegasus starship in 1:270 and Tactical scale. This was a standalone variant of the Chimera series that we featured back in Starship V alongside the Sleipnir. Includes

• Pegasus Starship Miniature STL Files

Please Note: SLA presupported versions coming in a future update.

Notinante Spaceship Miniatures

Get the Notinante configuration of the Sleipnir (single engine, forward PDCs, Torpedo Launchers and Rail Gun) starship in 1:270 and Tactical scale. This featured Starship V alongside the base Sleipnir. Includes

• Notinante Spaceship Miniature STL Files

1:270 Turrets

A conversion of many of our previous turret designs for use with 1:270 scale miniatures, compabible with our Traveller and Starship designs. Includes

1:270 Turret Miniature STL Files

2nd Dynasty Ship Miniatures

2nd Dynasty's starships Shuttle Alpha, Scout Ship Beta and Transport Delta and their variants in 1:270 and tactical scale. This package includes STL files for 42 miniatures.

Please note, we will be revisiting these files in the future with updated versions. In the meantime, enjoy our older models.

Chimera Starship Miniatures

Get Starship Chimera in miniature, including 8 ship variants in 1:270 and Tactical scales.

• Chimera Starship Miniatures STL Files

Pathfinder Starship Miniatures

Get the Chimera Pathfinder starship in 1:270 and Tactical scale. This was a standalone variant of the Chimera series that we featured way back in Starship IV. Includes

• Pathfinder Starship Miniatures STL Files

All the New Stuff

229 backers

Includes 11 products

Official Traveller Spaceship Created by Craig Pay in collaboration with Ian Stead, the Gig represents the small craft belonging to the Type CE Gazelle-class Close Escort. Rendered here in 28mm glory, the design is based on Ian Stead's sketchup, with interior components from 2nd Dynasty.

Craig has meticulously written detailed instructions which are included with the files.

28mm Type J Seeker (Type S Upgrade)

Now with parts that lets you install light kits!

For those who already own the Type S, this upgrade nets you the additional files needed to convert your Type S into a Type J. Includes

• 28mm Type J Seeker Upgrade STL Files

All-In on This Campaign

151 backers

Includes 13 products

28mm Type J Seeker

Get our Rob Caswell-style Type S conversion to the Type J Seeker prospecting and mining ship, featuring a classic traveller rear section, ore bays and pulse laser turret. This standalone version does not require the original Type S STL files to build. Includes

• 28 mm Type J Seeker STL Files

28mm Type S Scout/Courier

Our glorious 28mm-scale, highly detailed Type S Scout/Courier, as well as the stretch goals (nine in total) which allow a high degree of customisation of the ship, and a 15mm base ship variant for those looking for a more classic Traveller scale. Includes

• 28mm Type S Scout STL Files 28mm Type S Scout Stretch Goals STL Files 15mm Type S Scout STL Files

All-In on Traveller

174 backers

Includes 20 products

28mm T5 Turrets

Get a collection of turret variants from Traveller 5 (T5) usable on your Type S or any standard 2nd Dynasty turret port for our 28mm scale line of ships.

28mm Beta Centauri

A 28 mm scale conversion of our Scout Ship Beta design to the Traveller Universe, includes bridge, state rooms, galley, air raft garage, cargo bay, and drive compartment with jump drives, manoeuvre drives and a power plant. Includes

• 28mm Beta Centauri Standalone STL Files

Imperial Star Marines in Battledress Official 28mm Traveller Figures

A selection of 6 Offiicial Traveller 28mm scale Imperial Star Marines wearing TL15 battledress, including a marine suiting up. Includes

• Imperial Star Marines in Battledress STL Files

28mm Beta Centauri (Scout Beta Upgrade)

A 28 mm scale conversion of our Scout Ship Beta design to the Traveller Universe, includes bridge, state rooms, galley, air raft garage, cargo bay, and drive compartment with jump drives, manoeuvre drives and a power plant. This version only includes the instructions and new components. Requires the Scout Ship Beta base ship. Includes

• 28mm Beta Centauri Upgrade STL Files

28mm Air Raft Variants

Three air raft variants in 28mm scale. Includes:

• 28mm Air Raft Variants STL Files

2nd Dynasty Miniatures

This package includes STL Files for 65 character miniatures, both presupported and non-supported, from the 2nd Dynasty's catalogue: Vacuum Loader Mech Scout Crew Miniatures Base Sleipnir Crew Sleipnir Crew Stretch Goals Vacuum Suits Includes

• 28mm 2nd Dynasty Miniatures Collection STL Files

Traveller 28mm Character Miniatures

Get more than 60 Traveller figures at 28mm scale. Includes a rag-tag crew in a variety of action, standing, seated, zero-gravity and reclined poses, as well as a mercenary, TL15 Star Marine, male and female Aslan, a hiver in five poses, vacc suits and twenty vargr soldiers and bandits. Includes

• 28mm Traveller Character Miniatures STL Files

Give Me Everything

Includes 32 products

Transport Delta KS Edition

Current Version: 2.0 (Delta 1700-Series) (22/12/2023)

Cruise the hyperspace lanes in this high-speed transport. Two massive engines will get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator. The Transport Delta contains over 80 parts and is detailed inside and out. A variety of configurations can be used to customise the deck plans. Includes all Transport Delta-related stretch goals from Starship III Kickstarter: Asymmetric, Big Gun, Gunship, Saucer, Upper Deck and Upper Cockpit Variants. Also including the Long Transport Delta Variant from Starship IV. Includes

• 28mm Transport Delta Kickstarter Edition STL Files

Scout Ship Beta KS Edition

Explore deep space and final frontiers with this full 28mm scale scout ship. The base ship Scout Ship Beta Includes two manned turrets, a full sensor suite package, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge. The ship contains over 50 pieces. The interior is modular – customise the layout however you like using our other Starship or compatible tiles. The scout Ship Beta KS Edition includes all Scout Ship Beta-related stretch goals from Starship III on Kickstarter: Airlock, Cargo, Civilian, Gunboat, Missile, Patrol and Stretch Variants. Also including the Hammerhead Scout Variant from Starship IV Kickstarter. Includes

• 28mm Scout Ship Beta Kickstarter Edition STL Files

Shuttle Alpha KS Edition

The Shuttle Alpha is fully modular and can be configured as a dropship, cargo shuttle, or even a small star ship. More than a mere deck plan, this product includes a full scale (sized to 28mm miniatures) fuselage complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations. The interior is modular – customise the layout however you like using our other 2nd Dynasty Starship tiles or compatible tiles. Contains over 50 pieces and there are alternate parts for large and small print beds. There are also high and low detail versions. This Kickstarter Edition contains the Shuttle Alpha stretch goals from Starship III Kickstarter which means you can modify your Alpha with seven different variants: Winged, Bus, Warp, Turret, Missile, Twin Engine and Mobile Home Variant . Includes

• 28mm Shuttle Alpha Kickstarter Edition STL Files

2nd Dynasty Turrets

This package includes 2nd Dynasty´s Turrets Pack I, II and III all rolled into one for some variety. These turret tiles, suitable for use with 28-32mm miniatures, are compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles. Together the three packages includes more than 45 STL Files. Includes

• 28mm 2nd Dynasty Turrets STL Files

Modular Deckplans Collection

Create your own starship deckplans with these tiles from Starship I and II Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures. Includes

• 28mm Modular Deckplans Collection STL Files

Starfighter Modular System I & II

With Starfighter Modular Systems I & II you can make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. Starfighter I includes instructions to make the base variants Arrow, Basilisk and Lancer Starfighter as well as the Starfire Fighter. Starfighter Pack II includes five base variants, and pictures of these. Instructions will be available at a later date. Our two Starfighter-pack are compatible with each other to offer even more starfighter variants. Includes

• 28mm Starfighter Modular System I & II STL Files

Sleipnir KS Edition

Current Version: 1.1.5

- Updated clips to our modernised versions which provide options for tightness vs. snapiness - Removed the misaligned supports from Deck 03 angled hull pieces and made the parts print support free with no overhangs - Added a combined angled hull piece - Fixed a few orientation issues with STL files

The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and ready to take lighting in the engine and airlock room. Perfect for games such as Traveller, The Expanse, Starfinder or Stargrave. Instructions to build the base Sleipnir are included. The Sleipnir KS Edition also includes the Stretch Goals from Starship V Sleipnir Kickstarter. Includes

• 28mm Sleipnir Kickstarter Edition STL Files

Chimera Pegasus

Pegasus is a 28mm Chimera variant for transporting civilians from one planet to another. The ship has three decks and a full interior including sleeping pods, crew berths, table, control panels, kitchenette and chairs just to mention a small part of the STL-Files. Includes

• 28mm Chimera Pegasus STL Files

Chimera Cerberus

Cerberus is a Chimera variant for patrolling the space lanes. Featuring nine gun emplacements, two torpedo tubes, three powerful engines, and much more, the Cerberus is a fantastic hero ship for your sci-fi tabletop games.

28-mm scale (~1/60), this ship includes more than 250 STL Files and is an impressive hobby project that will keep you busy for weeks. With a design aesthetic evoking WWII bombers and galaxies far, far away, the Cerberus includes a small cargo bay, landing ramps to quickly deploy troops, droid charging stations, a medbay, workshop, bridge, living quarters and galley.

Instructions to build Cerberus are included.

Parts are compatible with the Chimera and Pathfinder standalone ships.

• 28mm Chimera Cerberus STL Files
• Assembly Instructions PDF

Chimera Pathfinder

The Starship Chimera Pathfinder is a smaller, distinct deep space exploration ship. It is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. The Chimera Pathfinder is detailed inside and out and a variety of configurations can be used to customise the deck plans.

Chimera Pathfinder contains approximately 260 parts and more than 70 unique parts.

It has a fully detailed interior and compatibility with other Chimera parts, but with one important caveat:

No Stretch Goals included. This is Starship Chimera Pathfinder only.

• Starship Chimera Pathfinder STL Files
• Non-Commercial Printing License

Chimera KS Edition

The stock Chimera is a cargo hauler's dream, allowing you to transport supplies to far off colonies, deposit tactical vehicles in hostile territories, or bring back artefacts from alien worlds. The Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard. Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Chimera contains approximately 400 parts and more than 100 unique parts. Chimera KS Edition Includes: Starship Chimera STL Files Starship Chimera Stretch Goal STL Files Includes

• 28mm Chimera Kickstarter Edition STL Files

Deck Designer

We have developed this software to help make building and customising ships both easier for ourselves and for our customers. Amongst other things, it features:

• Load standard layouts for existing 2nd Dynasty ships and variants
• Provide a print list for you to print off parts on your 3d printer
• User can import additional parts and import them into the program
• Supports importing other STLs from 3rd parties

Currently, we support the following ships directly:

• Transport Delta
• Official Traveller Type S Scout Ship
• Starfighters I
• Deck Designer Print Planning Software

If you wish to purchase for mac, please email [email protected]

Traveller Commercial License

The Traveller Commercial License allows commercial printers to print and sell our licensed Traveller designs for a period of 1 year. During this time, any Traveller designs from 2nd Dynasty that you purchase may be printed and sold for profit. STL files may never be redistributed and sold however.

For additional licensing information, see 2nddynasty.com .

MYMINIFACTORY

• 505-490-6373
• [email protected]

Traveller RPG Blog

• You are here:  

Join the Crew: A Guide to Playing Mongoose Traveller

Want to learn how to play the Mongoose Traveller RPG ? Embark on a sci-fi journey through the stars with our guide on how to play Mongoose Traveller RPG.

Welcome Aboard- Adventure Awaits!

Welcome to Mongoose Traveller ; a science fiction role-playing game where you explore the galaxy, meet new alien species, and create spacefaring adventures of your own. Newcomers to the game can find it a bit overwhelming to get started. But don't worry, this guide will give you a general overview of everything you need to know to play Traveller like a pro. 

If you are interested in trying Traveller but don't want to spend a lot on the  Traveller Rule Book you can get a copy of the Traveller Explorer's Edition (a Traveller PDF) for just $1.

• Character Creation

Let’s begin with Traveller character creation.  Traveller has a unique character creation system that generates an entire character history and backstory.  Players can start with an 18-year-old character with very few skills, or they can opt to push their luck through multiple terms in various careers and come up with an older character with more skills and experience.

Players use their characters as virtual avatars, with a set of skills, characteristics, and equipment to help them through upcoming adventures.

Characteristics

Players begin character creation by rolling two normal six-sided dice and adding them together for each of the six Characteristics (notated as 2d6).  This results in values from 2-12 with 7 being the average.  The higher the number, the better the character is concerning the associated characteristic.  Values can be driven above 12 through character creation and above 15 through the use of augmentation, such as cybernetic, mechanical, or chemical means.

The Characteristics are Strength, Dexterity, Endurance, Intellect, Education, and Social Standing.  These attributes determine how well a character can perform certain tasks or skills.  For example, a character with a high Strength characteristic would be better at tasks that involve strength like lifting heavy objects or forcing open a door, while a character with a high Intellect characteristic would be better at solving puzzles or coming up with original ideas.

After rolling 2d6 six times, you assign each roll to one of the characteristics in any order.  This defines how your character will start the game.  Characteristics can go up or down during character generation, so you may not end up with a character exactly like the one you started with. 

Character Concept

Coming up with a basic character concept at this point might help with some character creation decisions going forward.  You might consider the following:

• Where was your character born?
• What is their homeworld like?
• Do they come from a rich planet or a poor planet?
• Do they come from a high-tech world or a low-tech world?
• What was their family life like?
• What is their motivation to leave their home and seek adventure among the stars?

Jot these ideas down and use them as a guide to making decisions as you go through the character creation process.  Don't be afraid to edit these notes if you come up with better ideas as you go through the character creation process.

Background Skills

Next, players choose their background skills.  These are a few skills with a low level that the character might have acquired through school, a job as a teenager, or just from living life in general on their homeworld.  Once players have settled on background skills for their character, it’s time to seek a career.

At this point, you can stop character creation and opt to begin adventuring as a young adult with just their background skills.  Most players choose to spend at least one 4-year term doing some kind of career to start with a bigger selection of starting skills.

If a player wants to seek a career, there are many to choose from.  The rules contain twelve major careers, such as merchant, soldier, and scientist, each with three sub-career variations to choose from.

Once the career is chosen, players roll on various tables to gain new skills or increase existing ones.  Characters also experience Life Events, which are major turning points in their career.  Perhaps they were tempted to cheat on an important test while attending university, or maybe they were offered a bribe while working as a law enforcement officer.  Depending on how players choose to interact with these life events, and the luck of the dice, characters will gain a rich life history along the way.  Sometimes the results of Life Events are good, sometimes bad.

Players continue to serve 4-year terms in their chosen careers, or they can choose to change careers along the way.  Be careful, though; each term ages your character by 4 years.  Once you get past a certain age, you risk injury by continuing in dangerous careers.  The player must choose how many years they want their characters to have under their belt when they start playing.  Are they an old doctor or pilot with a lot of experience and an old shoulder injury and a pension?  Maybe they are just out of university and looking to test themselves.  Maybe they were drafted into the military but were discharged at 32 after receiving a major injury in the line of duty.

Connections

In Mongoose Traveller, players can form a connection between their characters and other players’ characters during character creation.  This can be a cool way to form bonds between characters and avoids starting the game with the “you all meet in a space tavern” situation.

Weapons, Armor, And Equipment

Finally, players choose equipment for their characters.  Some equipment and starting cash will be granted according to benefits you may have received during your character’s career.  The Traveller Rule Book has a decent selection of starting gear, or you can choose items out of supplements, like the Central Supply Catalog .  Weapons, armor, survival gear, and other equipment available should be appropriate to the game setting.  Characters can start with weapons, armor, or even a ship without having to spend much money.

Playing Traveller

Now that you are done with character creation, it’s time to start playing.  The game is run by a Game Master (GM), known in Traveller as the “Referee”.  This player is the host of the adventure and is responsible for creating a story, controlling all the non-player characters, and adjudicating the rules.  The Referee will present players with a certain situation and the players will use their character’s skills, characteristics, and backstory to help accomplish the various missions and adventures they encounter along the way.

Traveller is a type of collective storytelling game, where each of the players contributes to the ongoing story.  During the game, players roll dice and consult their lists of skills and characteristics to help determine the result of tasks with unsure outcomes.  For instance, players would not need to roll dice for things anybody could easily do, but they should roll dice when the results of their actions are unsure or could have story-changing results.

During the game, combat might come up.  Combat is resolved the same way other skill checks are; with characters attacking and defending using different types of weapons, armor, and environmental cover.  Weapon damage is reduced by the armor value of the target and any spillover damage is applied to reducing the target’s health characteristics (Strength, Dexterity, and Endurance).  When a character has two characteristics reduced to 0 they are considered unconscious and must skip their turn.  When a character has three characteristics reduced to 0 they are considered dead or dying and must receive immediate medical attention or die.

Starships in Traveller

One cool thing about Traveller is the use of starships to get from one planet or planetary system to another.  Players can purchase a ship or even acquire one during character creation.  Perhaps they can even salvage a derelict ship for free. 

Each ship has its own set of attributes, such as how fast it can go, how far it can jump, its cargo capacity, armaments, and defenses.  The  Traveller Rule Book has many example ships to choose from, or you can check out the High Guard book which details many new ships and includes instructions for building your own.

So where do you go on your ship?  Well, Traveller supplies many random tables, most using the d66 format which is a dice-rolling technique that gives you 36 possibilities from two regular 2-sided dice.  There are many random tables for a Referee to choose from which makes creating adventures on the fly much easier to do.

What You Need To Play

To play the Traveller RPG, you will need a few things.  Pencil, paper, the Traveller Rule Book , and two 6-sided dice at a minimum.  You will also need a group of players, one of which should be willing to be the Referee.  There are optional solo rules out there, but you will normally need at least 2 players; one to be the Referee and the other to be the character in the story.  Usually, 4-6 players are the ideal size.  It helps if all the players are fans of science fiction!

What if you need some help finding players or interpreting rules or situations in your game?  No need to worry – Traveller has been around since the late 70s and has a huge community and support system.  There are many other players and Referees out there who are excited to share their own experiences and help you to become a better Traveller player.  You can join forums, Facebook groups, Reddit groups, and Discord servers to connect with other Traveller players and enthusiasts. 

If you can’t find anybody locally to play with, you can even play by remote with a virtual tabletop (VTT) on your computer.  For more information check this article on How to Play Traveller Online .

Mongoose Traveller Forum

Citizens of the Imperium Forum

Traveller RPG Headquarters Facebook Group

Traveller Reddit

Mongoose Discord

Traveller RPG Discord

CyborgPrime Games Discord

Article: How to Find Traveller Players

As you gain experience playing Traveller, don’t be afraid of trying out different characters with different career options.  The beauty of Traveller is that there is no one "right" way to play. You can create a character that is a ruthless mercenary, a brilliant scientist, or a savvy merchant. The possibilities are endless.

In conclusion, Mongoose Traveller RPG is a fascinating and enjoyable science fiction game that has staying power.  Characters are rich and complex, the settings are imaginative, the adventures are exciting, and the community is friendly helpful, and knowledgeable.  With the information you gained in this article, you are now well on your way to starting your adventures exploring the galaxy in ways you never thought possible.

With a little bit of practice and a lot of imagination, you'll be able to create epic stories and unforgettable memories in no time. Happy Travelling, and above all have fun!

Where To Go From Here

For more info on ways to get started in Traveller along with tips and tricks for character creation and more, check out The Ultimate Guide to Playing Mongoose Traveller RPG .

Your Turn.  What Do You Do?

What kinds of adventures are you looking forward to in your Traveller game?

Please share with us in the Comments section below.

If you found this article helpful, please give it a good rating at the top, thanks!

E-mail Notification Opt-in

Do you want to be notified of future Traveller-related posts?

Sign up on my private mailing list .

YES! Please notify me of new Traveller RPG posts!

Please enable the javascript to submit this form

You can also join me and my friends on the CyborgPrime Discord server .

• Traveller RPG Characters
• Traveller RPG

Comments powered by CComment

Related Articles

Explore the Uncharted: The Planetary Profile Series

Discover the thrills of the traveller rpg mayday mayday event.

The Artistic Odyssey: Embracing AI Art in a Year of Discovery

Information.

Join Us On Discord: CyborgPrime Games on Discord

Visit Our Facebook Group: Traveller RPG Headquarters on Facebook

Help Support Us On Patreon: CyborgPrime on Patreon

Contact Us (505) 490-NERD [email protected]

Latest Sci-fi Blog Posts

• Traveller RPG Mayday Mayday 2024 Official Event Page 13 March 2024
• Explore the Uncharted: The Planetary Profile Series 29 February 2024
• Discover the Thrills of the Traveller RPG Mayday Mayday Event 23 February 2024

This website contains affiliate links . We may receive a commission when customers make a purchase . We only promote products or services we believe in and are not responsible for any issues that may arise . The commission is paid by the publisher .

Sci-fi Gallery

• Shop And Save
• Merch- Posters & More
• Login/Logout
• Sci-Fi Zodiac Designs
• Sci-fi Character Portraits
• 3D Sci-Fi Art

FREE UK shipping over £100 or over $150 to US

Free PDF with every book purchase

Sign up to our newsletter

Get all the latest information on Events, Sales & Offers. Sign up for newsletter today

• Core Rulebooks
• The Charted Space Universe
• Journal of the Travellers' Aid Society
• Accessories
• Traveller Fiction
• eBook Exclusive
• The All New Shiny Edition
• The Older Stuff
• Shield Maidens
• Sea of Thieves
• Core Rulebooks & Accessories
• Classic Traveller
• Classic JTAS & 3rd Parties
• MegaTraveller
• 1E Mongoose Traveller
• 1E Mongoose 2300AD
• Deus Vult Legend
• World of Xoth
• Other Settings
• Slayer's Guides
• Encyclopaedia Arcane
• Quintessentials
• New Classes
• Ultimate OGL Collections
• OGL Core Rulebooks
• Miscellaneous
• Battlefield Evolution
• Release Schedule
• Traveller Licensing

Your cart is empty

Welcome to the Far Future.

The latest edition of Traveller is based on the original classic but tweaked, finessed and updated for the 21st Century! Every Traveller book is now printed in full colour and all core rulebooks and supplements are gorgeous hardbacks, packed with everything you have come to expect from your favourite science-fiction RPG.

Traveller contains everything needed to play any science-fiction campaign, from desperate battles across the stars against evil empires, through free traders operating on both sides of the law, to mercenary companies desperate to find their next ticket or face bankruptcy - Traveller gives you the tools to explore the universe in a way that suits you.

• Sourcebooks
• Traveller eBooks

Free shipping

Free UK & US shipping on orders over £100 or $150

With every book purchase get a FREE PDF to download

Secure payment

Your payment information is processed securely.

Need to contact us? Just send us an e-mail at [email protected]

Cookie policy

I agree to the processing of my data in accordance with the conditions set out in the policy of Privacy.

• Traveller CCG on Facebook!
• Follow us on Twitter!
• Traveller CCG Google+ Community
• Horizon Games Vimeo
• Horizon Games YouTube
• Traveller CCG Board
• Traveller CCG on Reddit

Downloads and Support

Materials available for free download..

Whether you’ve lost your rulebook, or you need the latest clarifications and errata to win an argument with your friend, here’s a collection of Traveller Customizable Card Game downloads .

Traveller CCG Rulebook

Quick Play Guide

Card Anatomy Guide

Countersheet

Errata v1.0 (1/13/18)

Solo Play Scenario 4

Solo Play Scenario 5

Supplemental Unique Cards

BuffBot-3000, Grav-Hauler, Grav Assisted CargoBot

Captain's Card Back

Captain’s Card Back

• Safari Ship

Safari Ship is a Game Designers Workshop product.

• It is a source book designed for Classic Traveller .

If you are looking for information about the Ship Type Code KH, see Expedition Ship .

• 1.1 Table of Contents
• 1.2 Library Data Entries (Public)
• 1.3 Library Data Entries (Automated)
• 1.4 Selecting Ships
• 1.5 Selecting Smallcraft
• 2.1 Credits (Primary Sources)
• 2.2 External Link/s
• 3 References & Contributions (Sources)

Description ( Specifications ) [ edit ]

An amateur scientist obsessed with his science is hiring adventurers to accompany his expedition to a distant planet in search of a rare and extremely beautiful animal. He knows the planet it comes from, but that still leaves an immense area to search.

Safari Ship includes deck plans and descriptions for the Animal class Safari Ship , maps and data for subsector and planet , encounter information, and an essay on hunting. Plus special information for the referee.

• Please see Safari Worlds for a listing of worlds popular among safari hunters.

Table of Contents [ edit ]

Library data entries (public) [ edit ].

• 567-908 (world)
• Denuli Crystal
• District 268 Subsector
• Holding Tank
• Leaping Snowcat
• Mtume Denuli
• Siren Scientific Endeavor Society

Library Data Entries (Automated) [ edit ]

Selecting ships [ edit ].

• Animal class Free Trader
• Animal class Liner
• Animal class Safari Ship
• Animal class Survey Vessel
• Animal class Yacht
• Leaping Snowcat class Safari Ship

Selecting Smallcraft [ edit ]

• Denuli class Hunting Launch

Meta-history & Background ( Dossier ) [ edit ]

Safari Ship is an early adventure for Classic Traveller .

Credits (Primary Sources) [ edit ]

External link/s [ edit ].

Commentary & Data articles:

• EXTERNAL LINK: TBD

Other articles:

References & Contributions ( Sources ) [ edit ]

• Marc Miller . Safari Ship ( Game Designers Workshop , 1984), 1.
• Classic Traveller Books
• Game Designers Workshop Books
• Published 1984
• Articles at intermediate completion state
• Ship Source
• Sophont Source
• Pages using DynamicPageList parser function

Navigation menu