Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
- Sailboat Guide
- Description
Seller's Description
CL16, 1980 16 ft. classic daylsailer. As you probably know, the CL16 is a Wayfarer clone, built in Canada by CL Boatworks. They built them with a double hull, hence it is unsinkable. (if you have a chainsaw, you can prove it! After you own it)
The boat is in great shape. 2 white sails in very nice condition. All the rigging is ready for the water. The trailer is ready to go anywhere. Older evinrude 2.5 hp motor is really cute, starts right up and suits the boat well. in Woodstock, ‘Sailing Capital of the Universe’, New York. $2000 or phone 845 544 5373
Rig and Sails
Auxilary power, accomodations, calculations.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL
Sail Area / Displacement Ratio
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64) 2/3
- SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
- D : Displacement in pounds.
Ballast / Displacement Ratio
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
Displacement / Length Ratio
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
- D: Displacement of the boat in pounds.
- LWL: Waterline length in feet
Comfort Ratio
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )
- D: Displacement of the boat in pounds
- LOA: Length overall in feet
- Beam: Width of boat at the widest point in feet
Capsize Screening Formula
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Based on the Ian Proctor designed WAYFARER. CL = Croce & Lighthouse.
This listing is presented by SailingTexas.com . Visit their website for more information or to contact the seller.
View on SailingTexas.com
Embed this page on your own website by copying and pasting this code.
- About Sailboat Guide
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Home > Find Your Sail > Search by Make and Model > Cl > CL 16
" * " indicates required fields
Step 1 of 3
Let's Get to Know Each Other
Let's connect, cl 16 sailboat.
CL 16 was introduced in 1967-68, and it is a Canadian-designed 16’ sloop sailboat. It was designed by Henry Croce and Ken Lofthouse in Mahone Bay, NS. CL 16 is considered to have a similar design to the Wayfarer dinghy but with a few changes and upgrades. In 1968 its production was transferred to Toronto from Mahone Bay.
About the CL 16
CL 16 is a boat with an open cockpit, and it has a double hull design. CL 16 has a retractable centerboard. The sail plan includes a Marconi rig and the main jib and symmetrical spinnaker.
CL 16 has L.O.A of 16’0”4.88m and weight 395 Lbs 179 kg with mainsail 95 sq ft 8.82 sq.m. Other equipment found in CL 16 include white or off-white hull, multi-stripe mahogany side benches and thwarts as well as hiking straps.
The CL 16 comes with an impressive pivoting fiberglass rudder blade with an aluminum head, tiller, and golf-grip extension and a pivoting fiberglass centerboard.
Request a CL 16 Quote
Looking to buy a new headsail or mainsail for your CL 16? Request a free quote from Precision Sails for a new custom sail. Our team will work with you to design the perfect sail for you.
Thanks for telling us a bit about yourself and your boat. Our team will send you a preliminary quote based on information we have gathered from sailors similar to you.
We will give you a call in order to narrow down the options on your quote and improve the accuracy. If you want us to call you at a specific time, feel free to schedule a time on our calendar!
Thanks for telling us a bit about yourself and your boat. Our team will reach out to offer some suggestions and get started on finding you the perfect sail!
CL 16 Detailed Review
If you are a boat enthusiast looking to get more information on specs, built, make, etc. of different boats, then here is a complete review of CL 16. Built by C&L Boatworks and designed by undefined, the boat was first built in 1968. It has a hull type of Centerboard Dinghy and LOA is 4.88. Its sail area/displacement ratio 42.68. Its auxiliary power tank, manufactured by undefined, runs on undefined.
CL 16 has retained its value as a result of superior building, a solid reputation, and a devoted owner base. Read on to find out more about CL 16 and decide if it is a fit for your boating needs.
Boat Information
Boat specifications, sail boat calculation, contributions, who builds cl 16.
CL 16 is built by C&L Boatworks.
When was CL 16 first built?
CL 16 was first built in 1968.
How long is CL 16?
CL 16 is 4.52 m in length.
Member Boats at HarborMoor
- Most Popular Categories
- Boat Covers
- Boat Propellers
- Bimini Tops
- Boat Motors & Parts
- Boat Motors
- Boat Seats & Pontoon Furniture
- All Categories »
- Boats for Sale
- Boating Forums
2010 C & L Sailboats CL 16
Parts, Accessories & Upgrades to Consider:
Would these parts and accessories improve your boating and experience, related links.
- Insure my C & L Sailboats Boat
- Sell my C & L Sailboats Boat
- Boat loan quotes
Parts & Accessories
- Anchoring & Docking
- Cabin & Galley
- Boat Hardware
- Boat Seats & Furniture
- Boat Windshields
- Controls & Steering
- Covers & Tops
- Fishing Equipment
- Fuel Tanks & Systems
- Inflatable Boats
- Life Jackets
- Maintenance & Boat Repair
- Manuals & Books
- Marine Electrical
- Marine Electronics
- Marine Engine Parts
- Nautical Gifts
- Plumbing & Pumps
- Trailers & Parts
- Trolling Motors
- Videos, CDs & Software
- Watersports
STAY CONNECTED
Sign up for our Newsletter to Receive the Latest Deals, News and More.
OUR COMPANY
Explore iboats, connect with us.
- Forum Listing
- Marketplace
- Advanced Search
- About The Boat
- Gear & Maintenance
- SailNet is a forum community dedicated to Sailing enthusiasts. Come join the discussion about sailing, modifications, classifieds, troubleshooting, repairs, reviews, maintenance, and more!
Replacement spreaders for CL16 mast
- Add to quote
CL 16 - Wikipedia
why do you need to replace them and why not just get new ones from C & L
overbored said: why do you need to replace them and why not just get new ones f Click to expand...
Are the current spreaders foil shaped or just tubes? You should be able to get generic spreader stock through a rigger and cut them to length. You could also make your own spreaders. I had a 20ft race boat years ago and I made spreaders out of wood, and then wrapped them with a couple of layers of carbon fiber just for fun. Sent from my SM-G960W using Tapatalk
SchockT said: Are the current spreaders foil shaped or just tubes? You should be able to get generic spreader stock through a rigger and cut them to length. You could also make your own spreaders. I had a 20ft race boat years ago and I made spreaders out of wood, and then wrapped them with a couple of layers of carbon fiber just for fun. Sent from my SM-G960W using Tapatalk Click to expand...
I think I would take the suspect spreader to a local rigger. They are usually not too specialized as far as how it is made. Looks like a fun lil' boat.
miatapaul said: ... Looks like a fun lil' boat. Click to expand...
Finding a good small boat for day sailing, trailering...
I see you already ordered parts. But CL 16s are pretty much Wayfarer clones. Most parts should be close to interchangeable. https://www.tridentuk.com/gb/boats-and-catalogues/wayfarer-parts-catalogue.html
Yes, I think building the spreaders myself will be the best way to get back on the water. But thanks a lot for that great Wayfarer site ! I had looked at Selden as they make a Wayfarer mast but seems they no longer make the simple aluminum tube spreaders I have.
- ?
- 176K members
Top Contributors this Month
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
COMMENTS
16 to 20 would indicate reasonably good performance; above 20 suggests relatively high performance. SA/D = SA (ft²) ÷ [Disp (lbs) / 64]^.666. Bal./Disp.: A Ballast/Displacement ratio of 40 or more translates into a stiffer, more powerful boat that will be better able to stand up to the wind.
Racing. D-PN. 97. [ edit on Wikidata] The CL 16, or CL16, is a Canadian sailing dinghy that was designed by Ian Proctor, Graham Dodd and George Blanchard, as a cruiser and daysailer, and first built in 1968. [1] [2] [3] The CL 16 is a development of Proctor's 1957 Wayfarer design and is identical in dimensions and shape, with differences only ...
Photos. Photo 1: C & L Boatworks - Everything That's Old Is New Again! Photo 2: Company owner Dave Ventresca seen in their display at the 2014 Toronto International Boat Show. Photo 3: The CL boats are all available with such features as Harken equipment, coloured hulls and more. Photo 4: Doesn't that look like fun!
CL 16 is a 16′ 0″ / 4.9 m monohull sailboat designed by Ian Proctor/Graham Dodd / George Blanchard and built by C&L Boatworks starting in 1967. Great choice! Your favorites are temporarily saved for this session. ... The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more ...
C&L Boatworks. clboatworks.com 1953. Overview. Named after the two founders, Croce and Lofthouse, who developed the CL 16, first built in 1968. CL BOATWORKS Head Office: 446 Hamilton Road Belleville, ON. (905) 871-4625. Associations. ... 6 sailboats built by C&L Boatworks. Sailboat.
The original company was sold, and the new owners were charging people for parts and then never delivering them. I believe there is a Canadian company that can provide replacement parts for the CL16. CCI. 251 5th Ave. Amprior, Ontario. Canada. K7S 3M3. [email protected]. How could I get a copy of the manual.
C&L Boatworks. www.clboatworks.com. Named after the two founders, Croce and Lofthouse, who developed the CL 16, first built in 1968. CL BOATWORKS. Head Office: 446 Hamilton Road Belleville, ON. (905) 871-4625. Years in Business: 1953 - present. Sailboats Built By C&L Boatworks. (Dates indicate when boat was first built by any builder)
CL16, 1980 16 ft. classic daylsailer. As you probably know, the CL16 is a Wayfarer clone, built in Canada by CL Boatworks. They built them with a double hull, hence it is unsinkable. (if you have a chainsaw, you can prove it! After you own it) The boat is in great shape. 2 white sails in very nice condition. All the rigging is ready for the water.
2002 C & L Sailboats CL 16. This C & L Sailboats CL 16 sailboat has a fiberglass hull and an LOA of 16 feet (length over all). The boat has a 61 inch beam. This sailboat is set up to sail as a Sloop. The craft has 141 square feet of sail area. Displacement for the boat is 365 lbs. The draft of this sailboat is approximately 3'10".
CL 16 is a boat with an open cockpit, and it has a double hull design. CL 16 has a retractable centerboard. The sail plan includes a Marconi rig and the main jib and symmetrical spinnaker. CL 16 has L.O.A of 16'0"4.88m and weight 395 Lbs 179 kg with mainsail 95 sq ft 8.82 sq.m. Other equipment found in CL 16 include white or off-white hull ...
Been looking for used sailboats and came across these two options listed in some local papers.. 1980 CL16 (C&L Boatworks), which seems to be a version of the "Wayfarer". 1984 O'Day 17 Daysailer. Thoughts on pros/cons of these two boats for my needs... as long as their condition is reasonable.. prices are similar.. around $2K with a trailer..
C&L Boatworks: Related Sailboats: CL 16 : Download Boat Record: ... SA/Disp.: A sail area/displacement ratio below 16 would be considered under powered; 16 to 20 would indicate reasonably good performance; ... Camden, Maine, 1997), states that a boat with a BN of less than 1.3 will be slow in light winds. A boat with a BN of 1.6 or greater is a ...
If you are a boat enthusiast looking to get more information on specs, built, make, etc. of different boats, then here is a complete review of CL 16. Built by C&L Boatworks and designed by undefined, the boat was first built in 1968. It has a hull type of Centerboard Dinghy and LOA is 4.88. Its sail area/displacement ratio 42.68.
1) I want the boat to be performance orientated but also with a high degree of stability for a sailing dinghy. And yes I know an increase in one decreases the other. And I know that dinghy's are inherently unstable compared to a keel boat. 2) I want it to be easily trailered and rigged by one person.
2024 Beneteau First 14 SE. Find 11 C & L 16 boats for sale near you, including boat prices, photos, and more. Locate C & L boat dealers and find your boat at Boat Trader!
CL-16 sailing dinghy offshore from Mississauga on Lake Ontario.The boat is well balanced using just a bungee cord to hold the tiller steady. She sailed her...
The 2010 C & L Sailboats CL 16 sailboat has a fiberglass hull and has an overall length of 16 feet (sometimes referred to as LOA). The width (or beam) of this craft is 61 inches. This boat is rigged as a Sloop. The sail area for the sailboat is 141 square feet. The displacement for the boat is approximately 365 lbs.
What C & L model is the best? Some of the most iconic C & L models now listed include: 46 Trawler, Cantiere Craglietto, Explorer 45 and Sea Ranger Sundeck 45. Various C & L models are currently offered for sale by specialized yacht brokers, dealers and brokerages on YachtWorld, with listings ranging from 1968 year models up to 1986.
You should be able to get generic spreader stock through a rigger and cut them to length. You could also make your own spreaders. I had a 20ft race boat years ago and I made spreaders out of wood, and then wrapped them with a couple of layers of carbon fiber just for fun. Sent from my SM-G960W using Tapatalk.
31' Mariner Ketch - Major Restoration & Repower - New Rigging & Sails Tenants Harbor Maine, Maine Asking $45,000
1 wk ago. Lightly used CL 16 sailboat with trailer and new electric motor. In very good condition. Located in Elora. CL is a remarkable design that hasn't changed in over 40 years. $2,850.00.
San Diego, California. Year -. Make -. Model -. Category -. Length -. Posted Over 1 Month. 1979 Hobie Cat Sailboat 16 feet long, in ok codition, includes sail and trailer. Asking $1,500 or best offer.
C&L Marine Corp (TAIWAN) Designer: Doug Peterson: KLSC Leaderboard. Auxiliary Power/Tanks (orig. equip.) ... A sail area/displacement ratio below 16 would be considered under powered; ... Like the LWL, it will vary with the weights of fuel, water, stores and equipment. A boat's actual draft is usually somewhat more than the original designed ...