Call Us: (253) 851-2126 Mon-Fri 9-5 Pacific Time
- Beach Dolly
If you live on or near a beach, or have access to water via a sidewalk or hand launch ramp, we have just the item for you, a Beach Dolly. These dollies work very well — like a miniature trailer they balance the weight over the wheels and the central support rail. Tilt the stern end of the boat down and watch it float easily into the water. When you’re ready to beach your boat it’s an easy glide back onto the dolly, and the weight is balanced so that almost anyone can move the boat up the incline of a beach.
It’s easier to show than tell… here’s a quick demo of launching our 10′ Navigator from a Boat Dolly:
Often you can drive your boat to a local park with a swim beach in the off season and transfer the boat from cartop rack or trailer to the dolly. A short walk down the sidewalk to the beach, and you’ve got a no-waiting boat launch. In general, parks are open to this sort of activity with wind and oar propelled boats. (Check your local park’s regulations to make sure though.)
We are proud to be a Dynamic Dollies dealer. These dollies fit our boats to a T, and even if you have a boat made by a different manufacturer we can help you get the dolly you need. They have a variety of different configurations available, so they can work for almost any small boat!
Key features:
- Lightweight anodized aluminum construction
- Easy to disassemble – breaks down into several pieces (axle, two pieces of tongue, wheels)
- Easy to transport in a car or inside the boat when disassembled. (Note: you wouldn’t want to try to row with it inside the boat 😉)
- Non-corrosive wheel bearings for easy rolling
- Very high-quality product that can be custom configured to your boat
- Wheelbase is wide enough for good balance, but narrow enough maneuver easily
- Available in both sling and hard bunk configurations (hard bunk pictured above)
- Fat tires are available, helpful for rolling over soft ground (sand and mud)
And the best part is, US shipping is included in the price of the dolly! Even custom-configured dollies typically are drop-shipped within about a week. (Additional shipping charges apply internationally.)
See our Prices page for current cost information, and Contact Us if you have any questions or would like to place an order!
Built-In Options
- Special Colors
- Custom Woodwork
- Sliding Seats
- Stainless Steel Keel Strip
- Mounting Options
Accessories
- Boat Covers
- Forward Rowing System
- Pocket Puller
- Roller Furling
- Rowing Mirror
- Inflatable Sponsons
- Seacycle
- Spring Creek
Optional Cross Tube
Optional Cross Tube Support can be added to Dollies (Typically configuration 1) for Small Inflatables, Jon Boats, and other Flat Bottom Boats. Slides to any position.
CROSS TUBE OPTION for Configuration 1 is 55.00
- Sailboat Dollies / Trailers
- Sailboat Dollies
8′ Tiger Trax Catamaran Beach Dolly 8′ Beam
Florida Sail craft
Write a Review
- Create New Wish List
Description
This lightweight, yet sturdy rustproof beach dolly will carry your catamaran easily over sand, rocks, mud or pavement. The Cat Trax feature strong aluminum wheel rims with two-ply pneumatic rubber tires that disperse weight and do not dig in. Air pressure can be changed to accommodate the conditions. Roller bearings give low-friction wheeling. Twenty super hard and super slick delrin roller bearings per wheel provide smooth rolling.
Cat Trax provide no-hassle, maintenance-free operation with no lubrication required, plus they cannot rust. Tough and durable ABS molded and padded end caps center the boat and hold it in line. Just pull the CatTrax under the boat using the tie down ropes and, when balanced, secure the ropes to the stays. There is no faster or simpler system. Use the same tie down ropes to secure to your trailer tongue when transporting on the road.
**Please note Cat Trax are built to order and can take 5-7 days to build prior to shipping**
Choosing Axel Width: The best way to know which axle you need is to measure the width of your boat. All boats under 8′ wide use the 8′ Axle. All boats between 8′ and 8’6″ need the 8′ axle.
Boats that use the 8′ axle: Hobie: Getaway, Wave, 14, 16, 17, 18 Prindle: 15, 16, 18 Nacra: 4.5, 5.0, 5.2, 5.5SL, 5.7, 5.8, 460, N15 G-Cat: 5.0
Boats the use the 8’6″ axle: Hobie: 20, Tiger, Wildcat, Nacra: 6.0, 6.0NA, F18INF, F18, Inter 17, 18, 20, Carbon 20, N17 MKII Olympic Supercat: 17, 20
Related Products
7′ Tiger Trax Catamaran Beach Dolly 7′ Beam
8' Cat Trax Catamaran Beach Wheels
8′ Cat Trax Catamaran Beach Wheels with Standard Hull Cradles 8′ Beam
8′ Cat Trax Catamaran Beach Wheels with Wide Hull Cradles 8′ Beam
10′ Cat Trax Catamaran Beach Wheels
- O’pen Skiff Purchase Page
- ILCA – Element 6
- RS Sailboats
- Sunfish – Recreational
- Sunfish – Race Version
- Sunfish Sails
LaserPerformance Sunfish Parts Price List
- 420 – Zim Sailing
- Finding the Right Laser Rig: Formula
- Racks by Dynamic Dollies and Racks
- Load Rite Trailers
- Load Rite Sunfish Trailer
- **NEW** LoadRite for Sailboats
Sunfish Dolly by Dynamic
- Optimist Dolly by Dynamic
- How to Apply Laser Sail Numbers
- Applying Laser Sail Numbers
- North Sails for LaserPerformance Dinghies
- About/Contact
$ 560.00
Please Contact Us for Availability
Share this:.
- Click to email this to a friend (Opens in new window)
- Click to share on Facebook (Opens in new window)
- Click to share on Twitter (Opens in new window)
- Click to print (Opens in new window)
- Click to share on Pinterest (Opens in new window)
- Click to share on LinkedIn (Opens in new window)
- Click to share on Tumblr (Opens in new window)
- Click to share on Reddit (Opens in new window)
Description
Just $560 at shoreline assembled… or we can ship to your location.
Frequently Asked Questions:
Q: Can I get a dolly from Dynamic delivered with my new Sunfish? A: You bet.
Q: What materials are used in Dynamic Dollies? A: Materials are corrosion-proof and maintenance free: – Tough, UV-protected, injection-molded , through-bolted, plastic joint components – 1 1/2″ square structural-grade, anodized aluminum with boat-friendly round corners – Delrin ball bearings in wheel hub result in easy rolling on rough surfaces or deep sand – Strong, 3” non-stretch, polyester sling
Q: Are they any better than Seitech dollies? A: Simply, Yes. – After we toured the Dynamic factory we knew that this was a better product. The connector pieces are stronger, and design features have been added to improve the strength of all joint fittings. – Also, Ben and Chris have created a supply line for every part of all their dollies that can fill any order very quickly. – The Sunfish dolly comes in one box with simple instructions – so easy.
Why we choose Dynamic? – A Dynamic Sunfish Dolly brings the latest in design and materials to popular small boat dollies. – If you have owned a Seitech Sunfish Dolly in the past, these dollies are 100% interchangeable but have several notable improvements. – New features include wheels with ball bearings, tie-down eyelets on key parts, injection-molded glass-reinforced plastic joints, and a 3″ non-stretch polyester sling. – Made in Rhode Island, USA by two awesome guys who love to sail, Ben Spiller and Chris Souza.
Related products
Dynamic Dolly Type 23
Sunfish gooseneck assembly
Dynamic dolly type 18.
THE MELGES 15!
THE ROCKET! Built in the USA
SUNFISH – SAIL A CLASSIC!
Recent Posts
Hours & Info
Search products.
Contact us:
Any questions about the sailboats we sell, or the services we provide? We’re always eager to talk sailing and would enjoy helping you with any of your sailing needs. Contact Us
Designed by WPZOOM
ICARUS SPORTS USA
SERVING THE ROCKY MOUNTAIN REGION
CatTrax Beach Wheels
This is the standard cat dolly on the market today. Literally 1000’s in service around the world. Big 21” x 12” balloon tires mounted on no rust anodized aluminum rims allow your catamaran to be easily moved over sand, mud, rocks, or any surface.
2 ply tubeless rubber construction. Anodized aluminum alloy rims for superior strength and durability. Almost 10” wide, a full 2” wider than the competition. Resulting in at least 4” greater tire footprint. No plastic to deteriorate or weaken from exposure to the sun, or crack in freezing weather. 20 delrin roller bearings per wheel. Super slick, super hard. 2 more bearings per wheel than the competition. Again, less friction, rolls easier. No corrosion, just rinse. Over 100” of bearing surface per wheel. Largest rolling surface on the market. 2” anodized aluminum alloy axle, lightweight and virtually maintenance free for any environment. One piece for extra strength, no connectors or parts to lose. Optional padded fiberglass hull cradles provide extra support. Bolt through design for more security. No knobs to catch, lose, or strip. Optional aluminum backing plates available to make cradles trailer mountable. Optional t-handle attachment for makes it easier for one person operation. Made in America, not imported
Big 21” x 12” balloon tires mounted on no rust anodized aluminum rims allow your catamaran to be easily moved over sand, mud, rocks, or any surface. These pneumatic tires disperse weight and do not dig in. Air pressure can be changed to accommodate to the conditions at hand. 20 super hard and super slick delrin roller bearings per wheel for smooth rolling. No hassle, maintenance-free operation, lubrication is not required and they cannot corrode. Tough and durable ABS molded and padded end caps center the boat and hold it in line. Just pull the CatTrax under the boat using the tie down ropes and when balanced secure the ropes to the stays. There is no faster or simpler system. Use the same tie down ropes to secure to your trailer tongue when transporting over the road. 2” diameter anodized aluminum axle. Available for any beam width. Axle extenders available for boats over 8.5’ wide. T-handle attachment is available to simplify movement for one person. Can be used to move from the bow or the stern.
CatTrax With Cradles
All the same features as the standard CatTrax. Hand-laid and padded fiberglass hull cradles offer protection and superior support for rounded hulls. Bolt through design for extra strength. No slipping on the axle. No gouging or damaging the axle with a thumbscrew. Tie down ropes included to prevent the boat from sliding fore or aft on the cradle. Ropes also allow the dolly to be pulled under the boat with much less effort.
3 Cradle Sizes Available
Narrow : H-20, P18-2, P19, Nacra 5.2, Nacra 5.8.
Standard : H-16, H-18, Getaway, Wave, etc.
Wide : Inter18, 20 or boats with wider rounded hulls.
Optional aluminum backing plates allow the cradles to be more easily mounted to a road trailer. Optional T-handle available. Lightweight at only 46 lbs. total.
This is the hard wheeled version of the all time favorite catamaran beach dolly. The wheels are rotationally molded polymer the never need air. It is an economical alternative to our CatTrax yet includes all the same features such as the delrin roller bearings and molded, padded end caps to help center the boat. Recommended use would be on hard surfaces. Gravel, grass, or hard packed sand will offer support to allow for easy movement. Not recommended for softer environments.
2” diameter anodized aluminum axle
Available in 7’, 8’, or, 8.5’ axle lengths
31 lbs. total weight.
Optional T-handle available
Optional hull cradles available
- Sports & Outdoors
- Boating & Sailing
- Boat Trailer Accessories
- Tires & Wheels
Image Unavailable
- To view this video download Flash Player
Boat Dolly for Sunfish Class Sailboat w/Beach Wheels
About this item.
- Sturdy powder coated corrosion proof Aluminum construction
- Heavy Duty 3" non-stretch polyester sling, Stainless steel fasteners
- 15 x 6 inch wheels with premium stainless steel bearings
- Light weight and durable. Easy disassembly for transport to regattas
- Made in USA with American Labor
Customers also viewed these products
Product Description
Solid, single-tube aluminum construction Welded, all-metal frame with no plastic connectors virtually eliminates repairs Stainless steel machine screws used on all removable connections "Marine Blue" powder-coated finish helps protect against corrosion Heavy-duty 3" non-stretch polyester sling provides boat support without bleeding color on to the bottom. Ships with our Beach Wheels that include stainless steel needle roller bearing for easy rolling on any surface CNC machined solid aluminum axle spindles provide the perfect surface for the stainless steel bearings in our beach wheels to ensure smooth rolling. Through bolted axle, wheel and tube assemblies slide together for quick assembly and disassembly Average weight (without wheels): 19 lbs. Made in the USA
Product information
Technical details, additional information, looking for specific info, customer reviews.
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
- Sort reviews by Top reviews Most recent Top reviews
Top review from the United States
There was a problem filtering reviews right now. please try again later..
- Amazon Newsletter
- About Amazon
- Accessibility
- Sustainability
- Press Center
- Investor Relations
- Amazon Devices
- Amazon Science
- Sell on Amazon
- Sell apps on Amazon
- Supply to Amazon
- Protect & Build Your Brand
- Become an Affiliate
- Become a Delivery Driver
- Start a Package Delivery Business
- Advertise Your Products
- Self-Publish with Us
- Become an Amazon Hub Partner
- › See More Ways to Make Money
- Amazon Visa
- Amazon Store Card
- Amazon Secured Card
- Amazon Business Card
- Shop with Points
- Credit Card Marketplace
- Reload Your Balance
- Amazon Currency Converter
- Your Account
- Your Orders
- Shipping Rates & Policies
- Amazon Prime
- Returns & Replacements
- Manage Your Content and Devices
- Recalls and Product Safety Alerts
- Conditions of Use
- Privacy Notice
- Consumer Health Data Privacy Disclosure
- Your Ads Privacy Choices
Wheeleez, Inc. takes pride in providing personalized service. We’re just a phone call away. SALES & SUPPORT: 707-751-3999
Boat dolly beach conversion kits.
Wheeleez™ Boat Dolly Beach Conversion Kits convert Seitech® and Dynamic® boat dollies for beach use. Available in 3 sizes, now your boat dolly will glide over soft sand and other challenging terrain with ease.
Dolly shown with 42cm (16.5″) Wheel eez ™ balloon wheels.
Wheeleez™ Boat Dolly Beach Conversion Kit for Seitech/Dynamic Boat Dolly Includes 2 – 49 cm (19.3″) Polyurethane Wheels
Wheeleez™ boat dolly beach conversion kit for seitech/dynamic boat dolly includes 2 – 42 cm (16.5″) polyurethane wheels, wheeleez™ boat dolly beach conversion kit for seitech/dynamic boat dolly includes 2 – 30 cm (11.8″) polyurethane wheels.
- Accessories
- Tips & Tricks
Confirm your age
Are you 18 years old or older?
Come back when you're older
Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.
PART #:13004-1
Dynamic Dolly, Type 3
- Dolly style allows bow of boats with a curled gunwale to hang from a specifically shaped handle fitting. Snug-fitting edge trim atop the handle fitting protects the gunwale gelcoat. Type is suitable for Sunfish, Laser 2, JY 15, and more.
- Boat-specific tube and sling lengths provide a custom fit for each boat, enabling a balanced handle load and easy maneuvering.
- All joint fittings are through-bolted and designed for increased torque stability.
- Strong, 3” non-stretch, polyester sling provides wrap-around boat support.
- Adjustable, flexible V-fittings on bow and tongue tubes provide boat support forward of the sling and prevent boat and aluminum contact.
- Eyelets on sling and handle fittings facilitate securing boat to dolly in storage, on trailers or in racks. Tie-down with the handle fitting eyelet helps prevent slippage on steep ramps.
- Easy dolly breakdown using the snap buttons on wheel shaft and tongue tubes, as well as wing nuts on axle tube cross fitting.
- Pneumatic, non-corrosive, 16” x 4” wheels can be secured on wheel shaft with provided screws for added security. For soft sand conditions, tire pressure can be reduced to increase tire footprint.
Customer Reviews
This dolly is a sailing game changer for our Zuma sailboat! I can now launch it by myself with no lifting (saving my back). The standard wheels easily pass over the stone beach on Cayuga Lake and saves the hill from more scratches. What an amazing product! This dolly will ensure that we sail more often for years to come.
You may also like
Current time by city
For example, New York
Current time by country
For example, Japan
Time difference
For example, London
For example, Dubai
Coordinates
For example, Hong Kong
For example, Delhi
For example, Sydney
Geographic coordinates of Elektrostal, Moscow Oblast, Russia
City coordinates
Coordinates of Elektrostal in decimal degrees
Coordinates of elektrostal in degrees and decimal minutes, utm coordinates of elektrostal, geographic coordinate systems.
WGS 84 coordinate reference system is the latest revision of the World Geodetic System, which is used in mapping and navigation, including GPS satellite navigation system (the Global Positioning System).
Geographic coordinates (latitude and longitude) define a position on the Earth’s surface. Coordinates are angular units. The canonical form of latitude and longitude representation uses degrees (°), minutes (′), and seconds (″). GPS systems widely use coordinates in degrees and decimal minutes, or in decimal degrees.
Latitude varies from −90° to 90°. The latitude of the Equator is 0°; the latitude of the South Pole is −90°; the latitude of the North Pole is 90°. Positive latitude values correspond to the geographic locations north of the Equator (abbrev. N). Negative latitude values correspond to the geographic locations south of the Equator (abbrev. S).
Longitude is counted from the prime meridian ( IERS Reference Meridian for WGS 84) and varies from −180° to 180°. Positive longitude values correspond to the geographic locations east of the prime meridian (abbrev. E). Negative longitude values correspond to the geographic locations west of the prime meridian (abbrev. W).
UTM or Universal Transverse Mercator coordinate system divides the Earth’s surface into 60 longitudinal zones. The coordinates of a location within each zone are defined as a planar coordinate pair related to the intersection of the equator and the zone’s central meridian, and measured in meters.
Elevation above sea level is a measure of a geographic location’s height. We are using the global digital elevation model GTOPO30 .
Elektrostal , Moscow Oblast, Russia
Memorial Day Savings - 15% Off When You Spend $200 with code MEMORIAL15
- Call Us +1-503-285-5536
- Sign in & Register
- Recently Viewed
- General Parts
- Dollies, Trailers, & Racks
Dynamic Laser / ILCA Sailboat Dolly
Dynamic dollies & racks.
- Create New Wish List
Write a Review
Memorial Day Savings! 15% off orders over $200 with coupon code MEMORIAL15
Exceptions apply. Excludes Boats, Kayaks, and items not purchasble online. See sale page for details, terms, and conditions.
Frequently Bought Together:
Description
High-Quality Dolly Designed for Laser / ILCA Sailboats
Dynamic Dollies makes launching, retrieving, moving, and storing your ILCA or Laser sailboat a breeze. This dolly is designed specifically for your boat so you can be sure of a great fit. Aluminum tubing with high strength plastic fittings make this dolly lightweight and easy to assemble and transport. The tube sizing and balanced handle load make for easy maneuverability. 16 in x 4 inch wheels with ball bearings roll easily on any surface and a strong, non-stretch sling supports the hull. Dynamic Dollies is the industry leader in beach dollies, offering high quality products that are durable, easy to use, and provide excellent support for your boat. One year warranty included on all new Dynamic Dollies with replacement parts and large wheel upgrades available.
- Designed for the ILCA / Laser - Perfectly balanced and the right dimensions for your ILCA / Laser sailboat.
- Easy Rolling Wheels - Pneumatic, non-corrosive, 16 in x 4 in wheels can be secured on wheel shaft with provided screws for added security. For soft sand conditions, tire pressure can be reduced to increase tire footprint. with Delrin ball bearings for easy rolling on any surface
- Lightweight Aluminum Construction - 1-1/2 in square structural-grade, anodized aluminum with boat-friendly round corners is both lightweight and strong.
- High Strength Plastic Joints - Injection-molded tough glass-reinforced UV protected plastic joint components are used to connect the aluminum tubing, with stainless steel through-bolts for extra stability.
- Supportive Bow Bracket - Curved bow bracket for supporting the bow of your boat.
- Support Sling - 3 inch non-stretch polyester sling, ideal for boat storage and retrieval in wavy conditions.
- Tie-Down Points - Eyelets on all handle and sling fittings to easily secure boat to dolly
- Easy Lift Handle - The large forward handle and balanced load make moving your dolly super easy
- Quick Transport - The dolly can be broken down into several sections for easy transport in a vehicle or for storage when not in use
- Maintenance Free - Completely corrosion-proof and maintenance free components for long life
- Made in the USA - Manufactured by Dynamic Dollies & Racks in Bristol, Rhode Island
Warranty - Every care has been taken in the manufacture of your Dynamic Dolly. It is warranted for one year against defects in workmanship and material when properly used, cared for, and maintained. Dynamic will replace, free of charge, any part that proves, upon examination, to be defective under normal use. Owners are responsible for shipping product to Dynamic Dollies for inspection.
Assembly Instructions - Dynamic Type 2 Dolly
Assembly Video - Dynamic Dolly Assembly
Product Reviews (3)
Amazing product.
Posted by Elisabeth P on Mar 28th 2023
Amazing product, works perfectly and is being used 4-5 x weekly without any problems. Assembly easy and directions clear. They were helpful with questions I had before purchase. It also arrived to us on West Coast very quickly. All around 5 star experience!
Great product
Posted by Graham on Mar 28th 2023
Great Product. Great Service. Review from dynamicdollies.com
Great engineering
Posted by Pete Craig on Mar 28th 2023
Great engineering. Molded parts precision fit. Corrosion free materials. Easy to assemble. Balance with boat on trailer (tongue weight) just right. Purchased with beach wheels. Could not be happier with selection. Review from dynamicdollies.com
Shipping & Returns
Delivery Info: Enjoy Free Standard Shipping on most orders* to the Continental United States over $99. Our Standard Shipping method utilizes USPS, UPS, and FedEx to send packages near and far. Oversize/Freight shipping (where applicable), Expedited Shipping (where available), and rates to other destinations will be calculated at checkout.
See our Shipping Page for more information (and exceptions).
Returns Info: Your 100% satisfaction is our goal - we want you to love your sailing gear, but if something doesn't work out, we accept returns on most new, unused items*. Returns can be made within 366 days (1 year + 1 day) of your original order date. Exceptions include (and are not limited to) cut line, Rig Shop products, special order items, numbered sailors, and items used or worn sailing.
See our Returns Page for more information.
Related Products
Dynamic Laser 2 Sailboat Dolly
Zim ILCA - Club
Dynamic Sunfish Sailboat Dolly
Dynamic C420 Sailboat Dolly
Laser 2000 Sailboat Dolly
Subscribe to our newsletter.
Sign up for our newsletter to receive exclusive discounts, new product announcements, and upcoming sales.
IMAGES
VIDEO
COMMENTS
Retrieving Sunfish Sailboat Onto Beach With Seitech Dolly Laser Sailboat Ready for Action on the Seitech Beach Launching Dolly Seitech Opti Boat Launching Dolly Configuration 6 for Optimist Sailboat Seitech Configuration 5 for Zodiac Style Inflatable Boats The Seitech Launching Dolly makes it easy to launch, retrieve, move or store your boat. ...
Swift Kayak (28" Wide) on Trailex Universal Beach Launching Dolly : Force 5 Sailboat (4'-10" Wide) on Universal Beach Launching Dolly. Rear Bunk Supports can be Adjusted Outward or Inward. Supports Can Swivel from a Vee Shape to Flat - Allowing the Dolly to Fit All Hull Contours. Tongue is 4" W x 1-1/4" H ...
High-Quality Dolly Designed for Laser / ILCA Sailboats Dynamic Dollies makes launching, retrieving, moving, and storing your ILCA or Laser sailboat a breeze. ... Complete beach launching dolly for the Sunfish sailboat. Dynamic Dollies and Racks brings the latest in design and materials to popular small boat dollies. If you have owned a Seitech ...
Beach Dolly. If you live on or near a beach, or have access to water via a sidewalk or hand launch ramp, we have just the item for you, a Beach Dolly. These dollies work very well — like a miniature trailer they balance the weight over the wheels and the central support rail. Tilt the stern end of the boat down and watch it float easily into ...
Beach dolly from Hobie Cat for Hobie Wave sailboat. Free Shipping Over $99* - 366 Day Returns - Dedicated Customer Support. Menu. Search. Close Search. ... Proudly made in the USA by Dynamic Dollies and custom sized for your boat, offering a great fit ease of maneuvering. Shipped in an easy to assemble kit. ... Hobie Kayak Dolly Beach Wheel ...
This lightweight, yet sturdy rustproof beach dolly will carry your catamaran easily over sand, rocks, mud or pavement. ... Decrease Quantity of Sailboat Dolly Trailer with Laser Pico Dolly Combo Increase Quantity of Sailboat Dolly Trailer with Laser Pico Dolly Combo. Price: Now: $1,849.00. Was: $2,199. ...
I put together an inexpensive Sunfish dolly to be able to transport it from the parking lot of a favorite beach I go to, to get it to the waters edge. The w...
Beach launching dolly for the Sunfish sailboat from Dynamic. Easy to assemble and transport with easy rolling wheels. Free Shipping Over $99* - 366 Day Returns - Dedicated Customer Support ... Sailboat Dolly. Quantity: Decrease Quantity: Increase Quantity: $575.00. Add to Cart Frequently Bought Together: Add %str% to cart. Inc. Tax. Ex. Tax ...
The Seitech Launching Dolly makes it easy to launch, retrieve, move or store your boat. Easily assembled the Seitech dolly can be car-topped or broken down for auto trunk storage. Made of lightweight aluminum, the average weight is only 28 lbs. Seitech Dollies are available for canoes, sailboats, aluminum boats, inflatable boats, dories, skiffs ...
The Club 420 Dolly features solid, double-tube aluminum construction. Welded all-metal frame with no plastic connectors virtually eliminates repairs. Structurally reinforced rear axle supports C420 and I420 boats without flexing, even boats filled with water! Bow and keel rollers provide easy launching and boat retrieval.
15 x 6 inch wheels with premium stainless steel bearings. Light weight and durable. Easy disassembly for transport to regattas. Made in USA with American Labor. Report an issue with this product or seller. Add a debit or credit card to save time when you check out. Convenient and secure with 2 clicks. Add your card.
Now: $649.00. Was: $749.00. — You save $100.00. Quantity: More payment options. Add to Wish List. Description. This lightweight, yet sturdy rustproof beach dolly will carry your catamaran easily over sand, rocks, mud or pavement. The Cat Trax feature strong aluminum wheel rims with two-ply pneumatic rubber tires that disperse weight and do ...
This collapsible beach dolly allows you to bring your Tiwal sailboat close to the water on your own.Aluminum, dismountable with pin system. Delivered with a ...
Why we choose Dynamic? - A Dynamic Sunfish Dolly brings the latest in design and materials to popular small boat dollies. - If you have owned a Seitech Sunfish Dolly in the past, these dollies are 100% interchangeable but have several notable improvements. - New features include wheels with ball bearings, tie-down eyelets on key parts ...
Bolt through design for extra strength. No slipping on the axle. No gouging or damaging the axle with a thumbscrew. Tie down ropes included to prevent the boat from sliding fore or aft on the cradle. Ropes also allow the dolly to be pulled under the boat with much less effort. 3 Cradle Sizes Available. Narrow : H-20, P18-2, P19, Nacra 5.2 ...
VEVOR Beach Balloon Wheels, 13" Replacement Sand Tires, TPU Cart Tires for Kayak Dolly, Canoe Cart and Buggy w/Free Air Pump, 2-Pack 4.3 out of 5 stars 210 33 offers from $22.82
Wheeleez™ Boat Dolly Beach Conversion Kit for Seitech/Dynamic Boat Dolly Includes 2 - 30 cm (11.8″) Polyurethane Wheels. $ 253.00. View Comparison Chart. Boat Dolly Beach Conversion KitsWheeleez™ Boat Dolly Beach Conversion Kits convert Seitech® and Dynamic® boat dollies for beach use.
Dynamic Dolly, Type 3. Dolly style allows bow of boats with a curled gunwale to hang from a specifically shaped handle fitting. Snug-fitting edge trim atop the handle fitting protects the gunwale gelcoat. Type is suitable for Sunfish, Laser 2, JY 15, and more. Boat-specific tube and sling lengths provide a custom fit for each boat, enabling a ...
Melges contacted Dynamic when they designed the boat and now a Dynamic Dolly goes out with almost every Melges 15 sold. Small-boat racks, trailer racks Dynamic's custom-configured racks make up a ...
Elektrostal , lit: Electric and Сталь , lit: Steel) is a city in Moscow Oblast, Russia, located 58 kilometers east of Moscow. Population: 155,196 ; 146,294 ...
In 1938, it was granted town status. [citation needed]Administrative and municipal status. Within the framework of administrative divisions, it is incorporated as Elektrostal City Under Oblast Jurisdiction—an administrative unit with the status equal to that of the districts. As a municipal division, Elektrostal City Under Oblast Jurisdiction is incorporated as Elektrostal Urban Okrug.
Geographic coordinates of Elektrostal, Moscow Oblast, Russia in WGS 84 coordinate system which is a standard in cartography, geodesy, and navigation, including Global Positioning System (GPS). Latitude of Elektrostal, longitude of Elektrostal, elevation above sea level of Elektrostal.
In 1954, Elemash began to produce fuel assemblies, including for the first nuclear power plant in the world, located in Obninsk. In 1959, the facility produced the fuel for the Soviet Union's first icebreaker. Its fuel assembly production became serial in 1965 and automated in 1982. 1. Today, Elemash is one of the largest TVEL nuclear fuel ...
High-quality dolly for launching, retrieving, moving, and storing your ILCA Sailboat. Aluminum construction with beach wheels, easy to assemble and transport. Memorial Day Savings - 15% Off When You Spend $200 with code MEMORIAL15. Menu. ... Sailboat Dolly. Quantity: Decrease Quantity: Increase Quantity: $595.00. Add to Cart