venture 25 sailboat for sale

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

Venture 25 is a 25 ′ 0 ″ / 7.6 m monohull sailboat designed by Roger MacGregor and built by Macgregor Yacht Corp between 1974 and 1979.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

See also MACGREGOR 25.

Embed this page on your own website by copying and pasting this code.

Discover Related Sailboats

Macgregor 25

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

MacGregor Venture 25

Performance, accomodation.

Report error

Tell us what's wrong

We do our best to fix any errors in boatpedia. thanks for the help, your inquiry, please provide your contact information and specify the requirements or preferences you have..

Review of Venture 25

Basic specs., sailing characteristics.

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

What is Capsize Screening Formula (CSF)?

The capsize screening value for Venture 25 is 2.50, indicating that this boat would not be accepted to participate in ocean races.

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.4 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Venture 25 is about 114 kg/cm, alternatively 641 lbs/inch. Meaning: if you load 114 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 641 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

What is Motion Comfort Ratio (MCR)?

What is L/B (Length Beam Ratio)?

What is Displacement Length Ratio?

What is SA/D (Sail Area Displacement ratio)?

Maintenance

Are your sails worn out? You might find your next sail here: Sails for Sale

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

This section shown boat owner's changes, improvements, etc. Here you might find inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what to look for.

We are always looking for new photos. If you can contribute with photos for Venture 25 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us . Criticism helps us to improve.

VENTURE 25 Detailed Review

If you are a boat enthusiast looking to get more information on specs, built, make, etc. of different boats, then here is a complete review of VENTURE 25. Built by Macgregor Yacht Corp and designed by Roger MacGregor, the boat was first built in 1974. It has a hull type of Swing Keel and LOA is 7.6. Its sail area/displacement ratio 21.26. Its auxiliary power tank, manufactured by undefined, runs on undefined.

VENTURE 25 has retained its value as a result of superior building, a solid reputation, and a devoted owner base. Read on to find out more about VENTURE 25 and decide if it is a fit for your boating needs.

Boat Information

Boat specifications, sail boat calculation, rig and sail specs, contributions, who designed the venture 25.

VENTURE 25 was designed by Roger MacGregor.

Who builds VENTURE 25?

VENTURE 25 is built by Macgregor Yacht Corp.

When was VENTURE 25 first built?

VENTURE 25 was first built in 1974.

How long is VENTURE 25?

VENTURE 25 is 7.01 m in length.

What is mast height on VENTURE 25?

VENTURE 25 has a mast height of 7.71 m.

Member Boats at HarborMoor

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Pay My Bill
• Customer Service

• Free Newsletter
• Give a Gift

How to Sell Your Boat

Cal 2-46: A Venerable Lapworth Design Brought Up to Date

Rhumb Lines: Show Highlights from Annapolis

Open Transom Pros and Cons

Leaping Into Lithium

The Importance of Sea State in Weather Planning

Do-it-yourself Electrical System Survey and Inspection

Install a Standalone Sounder Without Drilling

When Should We Retire Dyneema Stays and Running Rigging?

Rethinking MOB Prevention

Top-notch Wind Indicators

The Everlasting Multihull Trampoline

How Dangerous is Your Shore Power?

DIY survey of boat solar and wind turbine systems

What’s Involved in Setting Up a Lithium Battery System?

The Scraper-only Approach to Bottom Paint Removal

Can You Recoat Dyneema?

Gonytia Hot Knife Proves its Mettle

Where Winches Dare to Go

The Day Sailor’s First-Aid Kit

Choosing and Securing Seat Cushions

Cockpit Drains on Race Boats

Rhumb Lines: Livin’ the Wharf Rat Life

Re-sealing the Seams on Waterproof Fabrics

Safer Sailing: Add Leg Loops to Your Harness

Waxing and Polishing Your Boat

Reducing Engine Room Noise

Tricks and Tips to Forming Do-it-yourself Rigging Terminals

Marine Toilet Maintenance Tips

Learning to Live with Plastic Boat Bits

• Sailboat Reviews

Venture 21 Used-boat Review

The vintage macgregor is a good example of a budget-friendly boat..

Maybe this has happened to you: You’re on a country road, driving to a wedding (or family vacation or business conference), and you pass a sailboat on a trailer with a “For Sale” sign. It’s not a big boat. It’s not a small boat. But it’s just about right for launching a small adventure with your young family, or maybe you’re looking to downsize. You can’t resist stopping for a closer look. Incredibly, the sign reads “$600,” including a nearly new trailer and an old 4-horsepower, two-stroke outboard that “runs like a top.” You write down the number and drive away, thinking: “Somebody is giving away a perfectly good boat.”

Chances are that “steal of a deal” is a Roger MacGregor-designed Venture 21, and if not, it’s probably one of the many copycats riding the trailer-sailer boom that MacGregor’s little boat ignited. The Catalina 22, the Santana 21, and the San Juan 21 are just some of the boats that followed closely in the wake of the Venture 21’s introduction.

The concept for the Venture 21 came out of MacGregor’s master’s thesis in the Stanford University MBA program. The first hull was introduced in 1965, but full-fledged production didn’t begin until 1967. Several thousand hulls later, the last MacGregor 21 (the boat was renamed in 1980) rolled off the line in 1986 at the MacGregor factory in Costa Mesa, Calif. Today, with some 36,000 sailboat hulls behind it, the company builds just one boat, the hybrid sailboat/powerboat MacGregor 26x.

Although MacGregor sold fewer Venture 21s than its successor—the Venture 22, which later became the pop-top Venture 22-2—the 21’s easy trailerability and affordable price helped it maintain its popularity throughout the 1970s. Capitalizing on the fiberglass revolution in boatbuilding, MacGregor’s business-school project sparked a pivotal marketing shift that helped bring recreational sailing to mainstream America.

While the trailer-sailer boom is far behind us, the Venture 21 and its many look-alikes have renewed relevance today. With their discretionary spending sharply cut, younger sailors are taking the Craigslist-route into sailing, scouring the classified ads for boats that don’t require dock space but still have room for a family sail. Meanwhile, many owners of 30-plus-footers are considering downsizing to a boat that doesn’t require mooring fees and a hefty maintenance bill each spring. For better or for worse, in the dim light of a recession, a back-to-basics giveaway boat on the roadside begins to look awfully enticing. For these and other reasons, PS decided to take a closer look at the Venture 21, which, in many ways, is the epitome of “the boat with a price I couldn’t refuse.”

The Venture 21 was designed to be affordable, easy to trailer and launch, and fun to sail, with enough room below for storing gear, napping, or even spending a night at anchor. It was principally aimed at new sailors, but it also appealed to those who wanted to step up from an open daysailer. Its size, sail area, and hull design were tailored for lakes and bays with fickle breezes of less than 15 knots.

Seaworthiness and performance were important considerations but pragmatism and aesthetic appeal were the driving force behind its design features.

Although the boat’s low headroom and Spartan interior would not qualify it as a weekender today, it was initially marketed as a “cruising” sailboat. A sleep-aboard sailboat that could be hauled around the country behind the family station wagon seemed perfectly in tune with the wanderlust of the 1960s.

While the Venture 21 is regarded as one of the first modern trailer-sailers, no single design element stands out as particularly revolutionary or unique. Instead, MacGregor incorporated proven features that would not only appeal to serious sailors, but also would remain consistent with the public perception of what a good boat should be and look like. In the yacht market, the Cruising Club of America boats were still the aesthetic model. Carl Alberg’s popular Ensign, launched by Pearson in 1962, is a good example of a small boat that clung to the CCA philosophy and aesthetic.

The Venture’s heritage is more closely aligned with two daysailers that were enjoying a surge of popularity on the East Coast in the early 1960s: the 17-foot Day Sailer, designed by George O’Day and Uffa Fox in 1958, and, to a lesser degree, the Phillip Rhodes-designed Rhodes 19, first offered by O’Day in 1959. Both were built by the nascent O’Day Group of Fall River, Mass. The similarities in the three boats are most apparent above the waterline. All have a relatively flat sheer line and spoon-like bow overhang (or spoonbow), elements that predate the modern yachting era.

While the Rhodes 19 still carries fairly deep V-sections well aft, making it a capable performer in the chop typical of its New England home waters, the Day Sailer flattens out, particularly at the stern, giving it fast, near-planing speeds off the wind. Fox and O’Day later refined this feature, earning Fox a reputation as the innovator of the planing dinghy. With a modest V-shape and a relatively fine bow, the Venture 21 lies somewhere between the two Rhodes 19 and the Day Sailer.

The Venture’s swing keel gives it 5 feet, 6 inches of draft—even more than its popular big brother, the Venture 25—and retracts to allow the boat to float in about 15 inches of water. (The brochure says 12 inches.)

Although the original design called for a fractional rig with a 22-foot mast, this was later changed to a masthead rig, giving it quite a bit of horsepower for its era. At the peak of its production in the late 1970s, the Venture 21 enjoyed popularity as a racing boat, with fleets springing up on the Gulf Coast, the Great Lakes, and the Northeast, as well as its home waters of Southern California. Although some owners have gone to the trouble of re-routing running rigging, fairing the keel, adding travelers and vangs, and replacing the pinned turnbuckles with threaded turnbuckles, we’d encourage someone inclined toward performance to look at a more modern hull with an active racing fleet.

One of the most notable features is the boat’s 7-foot cockpit, as big as that found in the much larger and heavier Catalina 22. However, unlike the Catalina 22, the San Juan 21, and the successively longer Ventures (V-22, V-23, V-25) that widened the cabintop to provide more interior space, the Venture 21 preserves enough sidedeck for crew to move forward . . . with care. Many V-21s, like the one we sailed, never had lifelines; others have had their lifelines removed. The standard single lifelines—low and poorly supported by widely spaced stanchions—offer a modicum of safety, but these are still less than ideal. In our view, lifelines are not a deal-breaker on a 21-foot daysailer, but if you have small children, a boat that is equipped with lifelines with a supporting pushpit and pulpit would be preferable.

The cockpit has a small lazarette, presumably to store fuel for the small bracket-mounted outboard, but this leads directly to the bilge, a bad idea that presents a potential fire risk. The original boats came equipped with top-grinding winches with short T-tracks for the jib. The boat we sailed had only a single fixed-point for the jib sheet. The end-of-boom mainsheet has a 4:1 purchase that spreads the load to each corner of the stern, a basic setup that limits trim options. Some owners modified the leads and added a mainsheet traveler, although this entails either raising the traveler over the tiller, or moving the sheet forward on the boom; both are compromise solutions.

A modest 18- by 18-inch fiberglass bow hatch allows ventilation down below, as well as a place for sails to be passed down. There is no anchor locker or chain pipe. The boat we sailed had an 8-inch diameter screw-on PVC deck plate that was apparently used as a chain pipe.

Overall, the deck has a functional layout, fine for its primary mission, which is to enjoy some time on the water with very little hassle.

Accommodations

The biggest drawback to the Venture 21’s emphasis on trailerability and a 1960s aesthetic is the lack of headroom below. By keeping the cabintop and topsides profile low, MacGregor produced a boat that, in our view, is better looking than the slab-sided models that followed. However, the end result is a very cramped interior. The VW-camper-inspired pop-top on the Venture 22-2, which came shortly after the Venture 21, offered a compromise that was adopted by a number of boats in this size range. Gradually, the intrinsic appeal of a low profile gave way to market demands. (MacGregor’s current and only model, the M26x, is a classic example of the wedding cake look that eschews traditional aesthetics for the sake of comfort below.)

With two quarter berths and a V-berth, the Venture 21 technically could sleep four, but this sort of arrangement probably would be brief and acrimonious. Although you could pack a lot of gear under the cockpit, actual locker storage is limited. Some ambitious owners have added sinks, small galleys, 12-volt systems, and port-a-potties below, but the boat’s cramped headroom restricts its suitability for more than a few days of cruising. For the 20-something adventurer with aspirations of camp-cruising on one of America’s many inland lakes, it will do just fine, but more than a couple of days aboard a boat this size will be a sure test of any marriage.

Construction

During the Venture 21’s 15-year production run, from 1965-1980, the materials and construction methods used for its deck, rig, structural components, and keel went through several changes. Construction of the hull itself, however, remained virtually unchanged. The hull was hand laid up with woven roven and mat. The layup schedule was a single unit of alternating mat and woven roven. Owners do report flexing in some spots, although we noted none on the boat we tested. The early boats are fairly resin rich, so hull thickness is not necessarily a reflection of strength.

The earliest Ventures had a stick-built interior, with bulkheads and bunks made of resin-coated cuts of plywood that were laminated in place. These earlier versions make it easier for owners to modify or rebuild an interior, and this is almost an inevitable project, given plywood’s propensity to rot and delaminate.

By the mid-1970s, MacGregor switched to a molded liner, which accelerated production and eliminated issues of rot, but added about 200 pounds to the total weight. Large sections of the boat are enclosed and filled with foam—a touted safety feature—but it is nonsense to consider the boat unsinkable, as some websites and blog posts suggest.

About 50 V-21s featured lead keels. The poured lead was anchored to a steel beam, and the entire construction sheathed in fiberglass. This process was not only expensive, but it also presented significant corrosion problems, as water eventually migrated into the fiberglass-encased keel.

Most models have solid iron keels; corrosion, however, is still a problem with these keels, but they can be removed, ground-down, faired, and sealed with an epoxy barrier coat to provide many more years of service. This is the biggest “problem” with the Venture 21, and any buyer should take a close look at the keel and the related components.

The original deck was plywood core, but this was later changed to balsa. In either case, rot is a potential problem (particularly in areas of the owner-installed deck hardware), but none of the 14 owners of Venture 21s who participated in our survey reported significant problems with deck rot.

The hull-to-deck joint was initially a bolted and adhesive-bonded shoebox joint, in which the lip of the deck flange fits over the hull just like a shoebox lid. This was later modified to an outward turning flange joint, with the hull lip turning outward to present a horizontal bonding surface for the deck. In both cases, the joint was bonded with a polyurethane adhesive sealant such as 3M 5200, bolted together, and then covered with an extruded aluminum and vinyl rubrail. Neither joint is as rugged as an inward-turning flange, but this is method is typical for a boat of this size.

Early versions of the Venture 21 were fractional rigs, but the majority were masthead rigs with overlapping jibs. An off-center backstay and upper and lower shrouds add support to the 22-foot mast. Early boats, like the 1969 model that we test sailed, did not have spreaders on the upper shrouds. In windy areas, where mast pumping is a noticeable problem, retrofitting spreaders—or looking for a more suitable boat—would be a good idea. The chainplates are through-bolted to the hull, eliminating the typically rot-prone attachment to plywood bulkheads found in some larger boats of this vintage. The original turnbuckles are the fixed-adjustment type that allow 1/8-inch adjustment intervals, making it hard to tune the rig at sea, but impossible to over-tighten, a common novice error.

The two biggest problems cited in our owners’ survey were the hand-crank keel winch and the keel-retaining bolt. Although the keel winches on later MacGregor models are braked mechanisms that will not spin freely under load, the one on the Venture 21 is a common ratchet-type trailer winch. If it is let go under load, the handle can whip around dangerously. Many owners have replaced this with a braked winch—a good idea, although these winches will require more maintenance. The keel-retaining bolt is a 3/8-inch diameter bolt that is slipped through a hole in the centerboard trunk and a corresponding hole in the keel. It is used to lock the keel in place when sailing in deep water, preventing the keel from flopping back into the hull should the boat capsize or surf down the face of a wave. The retaining bolts are commonly bent during a grounding, and any boat with a bent one should be inspected closely around the hull and keel trunk for other signs of damage.

Overall, the construction is light, but adequate for the boat’s designed purposes. If the deck isn’t too rotten, and the swing keel and keel box aren’t shot, most any other potential problem on the Venture 21 is easily remedied by someone who is handy and has the time.

Performance

During its heyday, the Venture 21 was promoted for it speed. MacGregor touted its position as the first of the “hot retracting keel boats” and the “fastest of its type,” with “planing speeds at over 16 miles per hour.” In this age of ultra-light monohulls and multihulls with eye-popping sail area (see PS, September 2009 and May 2010), this sort of hype seems quaint, but if you compare the Venture 21 to other boats of its era, it is clearly no slouch (See “Venture 21 in Context,” page 11). Its sail area/displacement ratio puts it ahead of several contenders, and its hull form—as mentioned—does give it an ability to hit double-digit speeds in the right hands.

The boat we test sailed was handicapped by ancient sails and an outboard that could not be fully tilted out of the water. Although the boat had a masthead rig, the headsail was a fractional working jib. A 140-percent genoa, found on many boats, would have added about 25 percent to the total sail area. To windward, the boat tacked smartly through 90 degrees, although we’d expect a boat with good sails to point higher. The boat was initially tender on the wind, but once the full effect of the 400-pound keel exerted its influence, the boat settled into a comfortable heel. Despite the deep bellies in her sails, the boat handled gusts surprisingly well, and by adjusting the swing keel’s depth, testers could easily achieve a balanced helm. Off the wind in 12 to 15 knots of breeze, we were able to sustain speeds of 7 knots under working sails alone with the keel almost fully retracted. While not wind-in-your hair sailing by today’s standards, it meets our definition of fun.

Conclusions

After spending some time aboard the Venture 21, we were reminded how much and how little has changed since the boat was introduced more than 40 years ago. Most comparable modern “weekenders” with big cockpits and modest cabins, like the Precision 21 or Catalina Capris 22, offer much more in terms of safety, systems (limited as they are), and modern conveniences. And entry-level daysailers like the thermo-molded Hunter 216 offer more in terms of performance options, such as a sprit for the asymmetrical sail and rigging conveniences like a hydraulic lifting keel. If true small-boat performance with a potential for one-design racing is what you’re after, then a boat like the J/22 presents a more sensible choice.

While overall construction quality has improved over the past 40 years, most daysailer hulls (the Hunter 216 and the balsa-cored J/22 excepted) are still solid fiberglass and laid up by hand, an economical and forgiving method. Many daysailers with cabins are actually much heavier than the lightly built V-21, but they also have much better finish quality.

The bottom line with the Venture 21 is the bottom line. If you hunt around long enough, you are likely to pick up a sailaway boat with a trailer and outboard for less than $3,000­—about the cost of a new trailer. The boat we sailed sold for far less, including the trailer and 4-horsepower Evinrude. If you are really patient, you can probably find a fixer-upper that someone will give to if you promise to drag it off their property.

Is this 40-year-old, mass-produced boat still a viable option for the entry-level sailor, or someone looking to downsize? No question about it. The Venture 21 is not a boat we’d recommend for someone with offshore aspirations or in places like San Francisco Bay where heavy air and a stiff chop would render it wet, slow, and uncomfortable. However, if you plan some coastal or lake adventures and are limited by a 2,000-pound tow capacity and a recession-era budget, then the Venture 21 definitely deserves a look.

There is one key caveat: Because it is easy to underestimate the amount of work required to revive barn-found boat, we would strongly urge looking for a Venture 21 that is in sailaway condition, rather than a project boat. Dealing with the iron keel alone can be a time-consuming project, and despite the boat’s interesting history, this adds little or no to resale value. On the good side, however, should you decide to embark on the restoration of a Venture 21, you will not be alone. Plenty have done it before, and given the boat’s irresistibly low price tag, more will surely follow in their wake.

RELATED ARTICLES MORE FROM AUTHOR

What kind of Trailer did your boat have. Mine (1972) is a 4″ welded C Channel, Is this a factory style trailer or somebody’s back yard built. It has the right v notches for the C/B etc.

LEAVE A REPLY Cancel reply

Log in to leave a comment

Latest Videos

Island Packet 370: What You Should Know | Boat Review

How To Make Starlink Better On Your Boat | Interview

Catalina 380: What You Should Know | Boat Review

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager

• Sign In or Register
• Boats for Sale
• Research Boats
• Sell a Boat
• Search Alerts
• My Listings
• Account Settings
• Dealer Advertising
• Venture Sailboats

Venture Sailboats Boats for sale

'79 MacGregor Venture 22

Saratoga Springs, New York

Make Macgregor

Model Venture

Category Daysailer Sailboats

Length 22.0

Posted Over 1 Month

Excellent Daysailer. I learned to sail solo on Lake George with this boat. Handles like a dream. I've slept on it a number of time. The ads will say it sleeps four. I'd say two adults and two small children. The hull has been scraped, but not painted. I kept it on the trailer when I wasn't using it. So, I didn't need to paint it. I've replaced all the wiring, the stern light, the winch strap for the trailer, and the cable for the swing keel. The cushions have all been recovered with vinyl. Last July, I had the plugs, points, head gasket replaced, and the carb rebuilt on the motor. It's old. But, if you let it warm up for a few minutes, it will run all day. Boat comes with: --main and jib sails-- like new sheets, halyards, dock and anchor lines (bought at the beginning of last season).--'67 Envinrude 9.5 hp 2 cycle motor w/ long shaft (runs well)--5 gal. fuel tank--two life jackets--3 step hook ladder--trailer is included in sale (2" ball required) The usual info:Hull: monohull w/ swing keelRig: masthead sloopLOA: 22'LWL:18'Beam: 7.33'Draft: 1' (keel up)/ 6' (keel down)Displacement 1800lbs.

21' Macgregor venture sailboat

Opelousas, Louisiana

Model Venture 21

Length 21.0

68' Venture 21 sailboat with trailer and outboard motor. This is a swing keel trailer sail boat with a shallow draft. 18" with keel up and 5' 6" down. Hull is in good shape and was painted 2yrs. ago. All fittings, mast, boom, rigging , and sails in good shape. A main, working jib , and 150% genoa are included. A mast raising rig is included. Its not original to the boat. I have raised the mast several times alone with it so it works. Though it is much easier with 2 people. Kick-up rudder with 2 tillers are in good shape. A new aux. engine mount was installed 2yrs. ago. Trailer is in excellent shape. New tires,lights, bearings,spare, all in good condition. The coupler extends to help keep your vehicle dry when at the launch. The little cabin stays dry and the door and hatch are fiberglass. Not wood. The keel winch looks almost new. I also have some of the original documents the boat came with. Including a 12 volt Motor Guide trolling motor and marine battery.

1979 Venture McGregor Sailboat with Trailer and motor

St. Charles, Missouri

Make Venture McGregor

Length 24 feet

1979 Venture McGregor Sailboat with 1993, 15 HP Electric start long shaft Mercury Engine. Rolling Furler system, has 150% Genoa Very well maintained boat

1979 Venture McGregor Sailboat with Traler

Length 25 foot

1976 MacGregor Newport Venture

Decatur, Georgia

Make MacGregor

Model Newport Venture

Newly refurbished 1976 Newport Venture 23' Cutter. Brand new interior cushions made with Sunbrella fabric and waterproof underside. Refinished wood accents. Very reliable 9.8 HP Tohatsu engine. 8' drop-keel. Freshwater vessel. Complete with both jib sails and two main sails. Removable sink and portable toilet. Convertible table/seat. Snap-on rain cover for inclement weather sailing or overnighting.

SAILBOAT 22' Venture 222 daysailer with trailer sails and outboard

Randolph, New Jersey

Model Venture 222

This sailboat has a swing-down keel and pop-up top. It sleeps four. Model is 1971 VENTURE 222 built by Macgregor Yacht Corp.Evinrude Yachwin 8hp motor is very clean and runs good. Comes with fuel tank.Sails and covers with windows are in good shape.Clean NJ title. Boat was last registered 2013.Trailer is road worthy and has bearing buddies with zerk fittings. Just purchased new trailer lights and wiring.Comes with misc items: ladder, bumpers, anchor, etcCushions are all there and in decent shape. Interior could perhaps benefit from some new paint.Last photo is of a similar boat with the pop-up in the up position so you can see what it looks like. It really opens up the cabin and provides good standing room.NJ delivery is available / negotiable. Viewable In Randolph 07869 Feel free to contact me for an appointment to view the boat.

1980 Endeavour 37 Sloop

Fairgrove, Michigan

Make Endeavour

Model 37 Sloop

Category Sailboats

1980 Endeavour 37 Sloop 1980 Endeavour 37 Sloop (Plan B) "Wonderful Freshwater Yacht Ready to Cruise Your World" This Endeavour 37 has been beautifully maintained and updated by her long time owners.  Raku is a freshwater boat that is ready to cruise wherever her new owners wish to venture.  She is built to sail well in all conditions.  With full cockpit enclosures, a proper sail inventory, and a well planned deck layout, Raku is truly an excellent bluewater cruiser.  This yacht is turnkey ready, and properly priced at a fraction of her replacement value.  If you are ready to cruise safely, in style and comfort, call today for your personal inspection of this wonderful freshwater yacht. This Freshwater boat is located in Michigan. File# 15201506D

1974 C & C Mark II

Make C & C

Model Mark II

1974 C & C Mark II FRESHWATER C&C MARK II 1974Price Reduced!NOW: $18,000 - WAS: $19,800Wonderful C&C 35.5 great condition! This C&C 35.5 has been well maintained by her long time owner. County Cork is a freshwater boat sailed exclusively in the Great Lakes. A terrific yacht with all the amenities to take her new owner anywhere they want to venture. With a propane cabin heater to fend off the occasional cold overnight, a rail grill for the evening barbecue, a three burner stove, refrigeration, a microwave, and accommodations for six, she is ready to cruise. C&C quality, excellent sailing characteristics, full equipment, and a great price make Count Cork a must see for the serious buyer. This Freshwater boat is located in Michigan. File# 15131506D.

1983 Morgan 384

Muskegon, Michigan

Make Morgan

1983 Morgan 384 This is a Ted Brewer design. A spectacular design is the right terminology, as it is truly SPECTACULAR and enjoyable even just to look at. As you venture down below it becomes obvious that this Morgan 384 is just as spectacular in asthetics as what you see above decks. The interior wood finish looks new. Wild Goose II is a wonderful boat to spend a lot of time in and on whether at the dock or out sailing!Look at the deep toe rail bulwarks for great footing in tough conditions and just imagine the sense of security that you and your first mate will feel sailing in all conditions.There is the delightful handling characteristics that the 384 is renowned for. When one understands that this is an 18,000 lb. very solid vessel, you can see a future with this lovely boat. Take Wild Goose II anywhere in the world. She is built like a tank and ready for action. Given the upscale condition and structure, she is a lot of boat for the money. Wild Goose II has had some upgrades with paint in 2013, including a barrier coated bottom and new paint. New sails in 2005. The bright work on deck has been recently finished.

27Ft Sailboat, Dofour Safari

Huron, Ohio

Make Dufour

Model Safari

Length 27.0

This is an outstanding READY TO SAIL Sloop. Length 27 Ft , beam 9.2Ft, draft 4.3 Ft. Used in fresh water on Lake Huron and on Lake Erie. There are impressive upgrades and improvements aboard this vessel. A new navy blue bimini was installed new this year and not on the pictures, but comes with boat. The power train consists of a professional factory rebuild on a Westerbeke four cylinder self-bleeding 30 HP Diesel (80 hrs.). Oil changes can be done in less than 15 minutes!. The attached drivetrain is 100% new as of 2014 as follows: Damper plate, Heavy duty adapter plate, Z-transmission, Coupler, Drive Shaft, Dripless seal, Cutlass bearing, Zinc, Engine rails and Mounts. This drive train provides superior maneuverability, smoothness, and quiet operation in any weather conditions and quickly starts in warm or cold temperatures. The rigging is in excellent condition with dual back stays, six shrouds and furling forestay. The aluminum mast features interior lines and floatation, All safety lines are new with heavy duty ¼ in ss cable and fittings. Sails consist of a nearly new 135% furling Genoa (This is a high end QUANTUM SAIL with all the bells and whistles) costing in excess of $2k. This sail is crispy and white complete with Sunbrella sun guard. The main is a fully battened Ray Leonard with double slab reefing and is in great shape (no rips or repairs) and comes with a matching Sunbrella sun cover. Lewmar winches in good working order, CSI Flexible Furler, Boomvang, Cunningham, Travel Car for main sheet,CQR 20 pound anchor and 100 feet of rope with short SS chain. 2nd Danforth lunch hook anchor, Simpson Lawrence 600 Electric windlass with capstan and deck mounted foot switches, Standard marine radio, New blue sea systems AC and DC electrical panels and all new wiring throughout, including the mast, new Moore digital sonar depth sounder, Bulkhead mounted compass and speed log. The hull is solid hand laid glass in superior condition with new Groco seacocks. The hull was awlgripped a few years back. Misc: Transom mounted SS swim ladder, solid SS bow cleats, Cabin fan, Halogen and LED interior lights, Custom dinette, New interior Cushions, Cockpit cushions (open cell foam), Electric and manual bilge pumps, plug in shore power and plug in generator wiring, SS fuel tank, Solid Brazilian cherry cabin sole, Map table with storage, Panasonic SS inverter microwave, Butane stove top burner, built in icebox and ice chest, deep sink, New Sealand toilet with new 7 gallon holding tank, and electric pump water flush, two New water storage tanks and all new water hoses and deck fittings for toilet, Hanging closet , V-bunk cabin with locking doors. This is a superior sailing boat with a very low center of gravity giving a stable ride without excessive healing. This sailboat is at its best in heavy weather. A great interior (see photos). And some other items not mentioned/pictured here. There is over twenty thousand dollars invested in this fine boat. Clear Ohio title. NOTE! The trailer shown with the boat is NOT part of this auction but is available for purchase (see details below).The trailer is a custom designed trailer and built in an iso certified mfg. facility on a Venture triaxle. It is unique in that it will transport a wide variety of both sailboats and power boats and can be changed over in under an hour with just a set of standard wrenches. Specs. are as follows; Max boat length power or sail= 32 feet, max payload=13000 lbs. keel depth up to 6 ft. The trailer has truck style heavy duty drum brakes on all three axles. It has a 7 inch high strength beam with 10 guage hot dipped galvanized cross members. If the winning bidder on the sailboat opts to buy the trailer the price would be 8,000 (firm) and paid for separate from ebay. If not, the trailer will be listed later at 9,000. The trailer has only 3500 miles and would cost 12,500 if you buy it as a new trailer.Shipping will be the responsibility of the buyer.Please see my 500+ all positive feedback, bid with confidence.

1982 S2 8.5A 28 foot Sailboat with Inboard Yanmar Diesel - In Racine Wisconsin

Racine, Wisconsin

Category Cruiser Motorcycles

Length 28.0

**** PLEASE NOTE: Because of the relatively low BUY IT NOW price, payment will be due within 24 hours via paypal. I will send you a paypal invoice after a successful "BUY IT NOW" or an accepted offer. Please only buy or offer if you have positive feedback. Your buy it now or offer constitutes a binding agreement to purchase so please ask questions BEFORE clicking "BUY IT NOW" or making an offer. After receiving your payment I will overnight you the title or meet you in person depending on timing and my availability.**** Very Nice S2 8.5A (28ft) for sale in Racine Wisconsin. I'm expecting a second child soon and really don't want to sell this excellent great lakes cruiser. Clean and clear Wisconsin title.Tiller steering. (always my preference)Inboard Yanmar diesel is extremely clean and fuel efficient. Recent full Yanmar service checkout since boat was last launched.Furling headsail in good shape. Newer mainsail in excellent shape.New Raymarine autopilot professionally installed. Shore power and long power cable. Halyards in good shape.New marine head and holding tank (never used). Chainplates recently professionally rebedded by boatyard. Interior in excellent shape.Solid fiberglass hull. All tabbed in joinery in excellent shape. Cored deck with NO soft spots. Very large cockpit.Includes steel cradle as well. I looked at everything in this size and price range in the lower half of lake Michigan for two years and this is the nicest boat I could find by leaps and bounds. Solid turnkey value. Launch is all ready paid for with the boat yard. You can be in the water tomorrow. No better deal can be found on solid and ready to sail Great Lakes cruiser with a clean inboard diesel - it is just time for me to move it along. Currently out of the water at Racine Riverside Marina in Racine, WI. Summer storage is paid through the end of this month and a launch is included in the purchase. If you chose not to launch until next season the storage rates at the Marina for winter are extremely reasonable and the pre-paid launch will still be yours come next summer. Here is a Review from "Practical Sailor" S2 8.5 MeterThe 8.5 is good for cruising the coasts in comfort and style--as long as you like the modern look.When Leon Slikkers founded S2 Yachts in 1973, much of the attention to detail that had previously characterized Slickcraft powerboats—Slikkers’ earlier boatbuilding venture— traveled with him to the new boatbuilding company. In the 13 years S2 sailboats were in production (S2 still makes powerboats), the company produced a variety of modern cruising designs from the board of Arthur Edmunds, all characterized by longish fin keels, freestanding spade rudders, straight sheerlines, and a staggering variety of draft options and cockpit locations. In the early ’80s, S2 reached more for the performance market with the Grand Slam series of small boats, and the 10.3 “offshore racer-cruiser.” These higher performance boats were designed by Scott Graham and Eric Schlageter, well known for their MORC and smaller IOR designs.The S2 8.5 is a 28-footer cast in the company’s traditional mold. Her hull dimensions, sail area, displacement, and general design characteristics put her square in the middle of the modern 28-footers such as the Tanzer 8.5, Newport 28, O’Day 28, and the Pearson 28.The boat’s styling is conventionally modern. She has a fairly straight sheer, fairly high freeboard, and low, raked cabin trunk with dark tinted flush ports. Production of the 8.5 ran from 1981 to 1983. The boat was replaced by the similar S2 8.6, which continued until S2 stopped making sailboats in 1986.ConstructionThe hull of the S2 8.5 is a solid hand layup. Glasswork is excellent, and is noted by owners as one of the main considerations in buying the boat. Gelcoat quality is excellent.Slight roving printthrough is evident, but it is not objectionable. Minor hard spots are visible in the topsides, probably caused by the attachment of interior furniture and bulkheads.The deck molding is cored with end grain balsa, giving a solid feel underfoot as well as providing reasonable insulating properties.S2’s hull-to-deck joint is the basic type that we would like to see adopted throughout the industry. The hull molding has an inward-turning flange, onto which the deck molding is dropped. The joint is bedded in flexible sealant, and through bolted on six inch intervals by bolts passing through the full length slotted aluminum toerail. The joint is also through bolted across the stem.All deck hardware is properly through bolted, although pulpits, cleats, and winches merely use nuts and washers on the underside of the deck, rather than the aluminum or stainless steel backing plates we prefer.Another feature of the hull-to-deck joint is a heavy, semi-rigid vinyl rubrail at the sheerline, quite aptly termed a “crash rubrail” by S2. This will go a long way toward absorbing the shock of the inevitable encounters with docks and the other hard objects that seem to be attracted to the topsides of the typical sailboat. Although this rail is black when the boat is new, it had dulled to a chalky gray on older S2’s we examined.The builder advertises “bronze seacocks on all through hull fittings.” These are not traditional tapered plug seacocks, but are ball valves mounted directly to through hull fittings. A proper seacock—whether it uses a ball valve or a tapered plug—has a heavy flange to allow through bolting to the hull. This is an important safety feature. Should a valve seize, it may become necessary to apply a great deal of leverage to the handle in order to open or close the valve. The deeply threaded through hull stem can easily break under these conditions, and more than one boat has been lost in this manner.We also suggest that seacocks be installed on the cockpit drain scuppers and the bilge pump outlet, both of which may be under water while the boat is sailing. Light air performance would benefit by the fairing in of the through hull fittings, particularly the head intake and discharge, both of which are far enough forward to have a significant effect on water flow past the hull.Ballast is a 3,000 pound lead casting, epoxied inside a hollow keel shell. We prefer an external lead casting bolted to the hull for its shock-absorbing qualities and ease of repair. This preference was reinforced recently when we examined an old Bristol 27 just sold by a friend. The surveyor noticed dampness near the bottom of the leading edge of the keel, which showed slight external damage. Probing the loose putty revealed some abrasion of the glass keel molding. In order to sell the boat, it was necessary to grind away a large portion of the glass at the front of the keel, dry out the ballast, and reglass the lead—a job that took several days of work and cost our friend a fair chunk of money.Much of the boat’s interior structure is plywood, glassed to the hull. Fillet bonding is neat and workmanlike with no rough edges to be found.Chainplates are conventional stainless steel flat bar, bolted to bulkheads and plywood gussets in the main cabin. These are properly backed with stainless steel pads. Due to the fact that the hull is lined throughout with a carpet-like synthetic material, it is not possible to examine the bonding of the chainplate knees to the hull. The stemhead fitting is a stainless steel weldment, through bolted to the deck and hull and reinforced inside the hull with a stainless steel gusset to prevent deflection of the deck from the pull aft of the headstay. We’d like to see a metal backup pad behind this fitting rather than the washers which are used.General construction is thoughtful and well executed, with excellent glasswork, a strong and simple hull-to-deck joint, and reasonably installed hardware and fittings.Handling Under PowerAlthough some early models of the 8.5 used a seven horsepower BMW diesel, the 1982 version employs an eight horsepower Yanmar. These small Yanmars are quite impressive, light in weight and far smoother than the company’s older rockcrushers.Because of the high freeboard and considerable windage of the 8.5, the standard engine is the absolute minimum power plant for the boat. Recognizing this fact, the company offered a 15 horsepower, two-cylinder Yanmar as an option. For another 75 pounds and $1,150, we would want this option on the boat if the ability to get places under power is a real consideration.The extra fuel consumption of the larger engine will scarcely be noticed. The 18 gallon aluminum fuel tank will probably give a range under power of over 250 miles—more than adequate for a 28 foot cruising boat.The fuel tank is located under the cockpit and is securely mounted and properly grounded. There is an easily reached fuel shut off between the engine and tank. Unfortunately, the fuel fill is located in the cockpit sole. Spilled diesel oil turns even the best fiberglass nonskid into an ice skating rink. Fuel fills should be located on deck, where spills can be efficiently washed away.Engine access is via a large removable panel on the inboard face of the quarterberth. This panel lacks any kind of handhold to make it easily removable, which will discourage regular checking of the engine oil. The top companionway step also removes for access, but it’s a long reach to the dipstick.There is no oil pan under the engine. It will be necessary to be very careful when changing oil to keep the bilge clean. We have yet to see anyone change oil and filters on a boat engine without spilling something.With the quarterberth panel removed, access for routine service is excellent. The quarterberth has remarkable headroom over, so that the mechanic will not feel like a trapped spelunker after a half hour of work. Engine removal will require some joinerwork disassembly.Handling Under SailThe S2 8.5 is no slug under sail. Her PHRF rating of 174 to 180 compares very favorably to other boats of her size and type. The Sabre 28, for example, has a rating of 198. The Pearson 28 about 195, and the O’Day 28 about 198.Part of this is no doubt due to the fact that the standard sails on the boat come from the North loft. While North’s OEM sails may not be the vertical cut Mylar-Kevlar wonders that adorn custom boats, they’re a lot better than most.S2 now uses Hall spars. The simple masthead rig is extremely clean, with airfoil spreaders and internal tangs. The boom features an internal outhaul and provision for two internally-led reefing lines, with cam cleats at the forward end of the boom.The deck-stepped mast is mounted in a stainless steel deck plate incorporating plenty of holes for the attachment of blocks. Halyards and Cunningham lead aft along the cabin house top to a pair of Lewmar #8 winches. Lewmar #16s are optional, but hardly necessary.The main is controlled by a six-part Harken rig mounted on the end of the boom, and a Kenyon traveler mounted on the aft cockpit coaming. This will work fine with the tiller-steered version of the boat. With wheel steering, the mainsheet is likely to be a nuisance to the helmsman.Because of the end-of-boom sheeting, a boom vang will be essential for full mainsail control. Ironically, the boat’s drawings show almost mid-boom sheeting, with the traveler mounted on the bridgedeck at the forward end of the cockpit. This is probably a better arrangement, although it heavily loads the center of the boom and requires more sheeting force.Owners of 8.5s have little but praise for the interior of the boat. The cabin has a wide feeling, created by pushing everything outboard. The “chart area” on the plan is a myth, as far as we can tell.Despite the fact that the shrouds are set well in from the rail, the boat lacks inboard headsail tracks. Rather, you are limited to snatch blocks shackled to the toerail track. A six-foot piece of track set inboard of the rail would be a useful addition.Standard headsail sheet winches are two-speed Lewmar #30s. Options include both larger winches and self-tailers, both of which are worth considering for either racing or cruising. The cockpit coamings are wide enough for mounting larger primaries and secondaries.The high-quality rig and sails add to the price of the S2, but they are additions well worth the cost.Deck LayoutThe deck layout of the 8.5 is clean and functional, with no toe stubbers to catch you unawares. There are two foredeck mooring cleats, but no bow chocks. The necessity to lead an anchor line well off the boat’s centerline, coupled with high freeboard forward, is likely to result in a boat which sails around on her anchor or mooring. The 8.5 has a pair of wide stainless steel chafing strips at the bow which will greatly protect the deck from the chafe of the anchor line.The 8.5’s foredeck anchor well is one of the best we’ve seen. It is shallow—just deep enough to hold an anchor and adequate rode. There are double scuppers, which offer less likelihood of clogging. The lid is held on by a full-length piano hinge, and there is a positive latch.The shallow locker well above the waterline means that water is less likely to enter through the scuppers, which can be a real problem with a deep anchor well. When the bow pitches into waves, a deep anchor well can fill with water, and if the scuppers clog with debris, you can find yourself sailing around with several hundred pounds of extra weight in the worst possible position. There is no provision for securing the bitter end of the anchor rode, but a big galvanized eyebolt installed in the well by the owner will solve that one.The running lights leave something to be desired. Their location at deck level just aft of the stem makes them vulnerable to damage when handling ground tackle. We much prefer an international style bicolor mounted on the pulpit, another two feet off the water: easier to see, and out of the way. Wiring for the running lights is exposed in the anchor well, and should be secured out of the way.A recessed teak handrail runs the full length of the cabin trunk, serving the dual function of heavy weather handhold and cabin trim piece. Its shape makes it far easier to oil or varnish than the conventional round handrail, although the wide, flat section seems somewhat awkward after years of grabbing round rails.The 8.5’s cockpit is the maximum size we’d want to see on a boat of this size. The T-shape is designed to accommodate the optional wheel steerer, yielding a somewhat odd layout for the tiller-steered version. A bench seat spans the aft end of the cockpit. Although this makes good seating in port, we doubt that you’d want anyone sitting there under sail: too much weight in the end of the boat. It does make a natural helmsman’s seat for wheel steering.The engine controls and instrument panel are also located at the aft end of the cockpit, and are basically inaccessible to the helmsman of a tiller-steered version.There are two lifting lids in the aft cockpit bench, giving access to a cavernous space under the cockpit. To be useful, dacron bags should be fitted to the inside of these lockers. Then, they’ll be handy stowage for spare sheets and blocks.There are comfortable contoured seats along each side of the cockpit, with a huge locker under the port seat. Although plywood pen boards somewhat separate this locker from the engine space under the cockpit, it would be far too easy for deeply piled junk to get knocked over the board and into the engine. This locker should be partitioned into smaller spaces unless it is to be used exclusively as a sail locker.The battery boxes, fitted at the forward end of the locker, could benefit from plywood or fiberglass lids to keep battery acid off gear which might find its way onto the batteries. The box is designed to take two batteries—one battery is standard—stored in plastic containers. A single lid covering the whole box would be more efficient.The huge cockpit will accommodate up to six for sailing, and eight for in-port partying. The cockpit seat bottoms are contoured, and the cockpit coamings slope outboard for more comfortable seating. However, the seats are both too narrow and too short for sleeping.The forward end of the cockpit is protected by a narrow bridgedeck. However, the cockpit coatings extend a full foot above the level of the bridgedeck, To block the companionway to the level of the top of the coamings will require leaving two of the three drop boards in place when sailing.Although there is moderate taper to the sides of the companionway, making it easier to remove the drop boards, it is still necessary to lift each board about five inches before it can be removed. This is far safer than many tapered companionways, where boards practically fall out if you look at them wrong. The companionway slide is one of the best we’ve seen. It’s a contoured piece of acrylic fitted with a convenient grabrail. It slides easily in extruded aluminum channels, and is fitted with a fiberglass storm hood. As on many boats, the aft cabin bulkhead slopes forward, rendering it impossible to leave the drop boards out for ventilation when it rains.BelowdecksOwners consistently praise the interior design and finishing of S2 sailboats. From looking at the 8.5, it’s pretty easy to see why.There are no exposed interior fiberglass surfaces except the head floor pan molding. The hull and cabin overhead are lined with a carpet-like synthetic fabric. While this will undoubtedly cut down on condensation, we at first wondered how this fabric would hold up over time. Inevitably, the hull liner and even the overhead will get wet. In freshwater areas, this is no problem. The water will eventually evaporate. In salt water, however, wet fabric never seems to dry. Salt draws moisture like a magnet draws steel. Since first seeing this boat, however, we’ve had good experiences with the fabric. Be sure, however, to get a good wet-or-dry vacuum to keep it clean.Interior layout is fairly conventional, with Vberths forward, and immediately aft, a full width head. The head can be closed off from both the forward cabin and the main cabin with solid doors—a real luxury in a boat this size. There is a large hanging locker in the head, and reasonable storage space for toilet articles.The word for the main cabin is “wide,” with the settees pushed as far outboard as they can go. Décor is a little heavy on the teak for our taste, but it is one of the better coordinated interiors we have seen. S2 had a good interior decorator.A fold-down dining table seats four. When folded against the bulkhead, it is held in place by a single latch, which makes us nervous.Neither settee is full length. The foot of the port settee runs under the galley counter, making it long enough for sleeping, although your feet may feel a little claustrophobic in the tiny footwell.The starboard settee is an unusual configuration. The aftermost 12" of the settee folds up to form an arm rest, leaving a gap between the end of the settee and the head of the quarterberth.Inexplicably, this gap is referred to on the accommodation plan as a “charting area,” although there is neither a standard nor an optional chart table. It’s sort of like the designer ran out of energy before completing the interior design.Over the non-existent “charting area” is the best electrical panel we’ve seen on a 28 foot boat. The panel has a locking battery switch, battery test meter, and a panel with room for 14 circuit breakers, although only half are installed on the standard boat.The space is welcome, since with the proliferation of marine electronics most electrical panels are woefully inadequate.Most quarterberths tend to induce claustrophobia. That of the 8.5 is more likely to exacerbate any tendencies you might have to agoraphobia. At last, a quarterberth which will not give you a concussion when you sit bolt upright in the middle of the night after your neighbor drags down on you in a wind shift.The standard main cabin sole is carpet-covered fiberglass. For an additional $325, teak and holly was available for the traditionalist. We’d want it. Unfortunately there is no access to the bilge in the main cabin. None. This is inexcusable, and could be dangerous. A few hours with a saber saw should solve this rather basic problem.The galley is workable and accessible, with no awkward posturing required to do the dishes. The sink gets an A+. It is a full nine inches deep, is large enough to take a frying pan, and mounted close to the centerline.In contrast, the icebox gets a C-. It is larger than normal on a boat of this size, but it drains to the bilge, has a poorly insulated top, and a tiny, uninsulated hatch without a trace of a gasket. Boo.Because of limited counter space, the two burner Kenyon alcohol stove is mounted athwartships, rather than fore and aft. This means that the stove cannot be gimballed, and that it is necessary to reach across the inboard burner to reach the outboard one. Given the fact that countertop gimballed stoves are usually dangerous, the lack of gimballing doesn’t bother us much. What does bother us is that if you want to upgrade the stove to something more functional, the limited space allocated will stretch your ingenuity.A fold down table at the end of the galley counter gives additional counter space, but it must be left up in order to use the port settee for sleeping.Roominess, excellent execution, and good color coordination are trademarks of the interiors of all S2s, and the 8.5 fits well into this enviable tradition.ConclusionsThe S2 8.5 is a good boat for cruising the Great Lakes or any coast in comfort and a certain amount of style. Her appearance may be a little modern for traditionalists, with her straight sheer and European-style cabin windows.Pricey? Yes, but when you look at the things that go into the boat—the rig, good sails, and a comfortable, well finished interior—the price may seem a bit less painful. You still pay for what you get.

2014 New Double Axle Aluminum Boat Trailer 21

Spanaway, Washington

New Venture 2014 Double Axle Aluminum Boat Trailer 21-24 boat 5,900# load rating.<a href="https://plus.google.com/photos/107171331854161592399/albums/5409168884802508017?banner=pwa">Photos</a> Overall length 25 ft.Aluminum wheels and fenders and main I-beam frame rails, galvanized axles, surge disc brakes both axles, super lube hubs, LED lights, poly sleeve bunks [better than rollers], target bunks, loading guides, 2 speed winch, HD yellow strap, 24-hr roadside assistance with spare tire purchase.Everything adjustable, fits almost any powerboat this size and some sailboats.Also have triple axle ones with 10,600# load rating Pictures link above and leftalso see venturetrailers.comTrailer lot open by appointment only For additional information, reply to this ad or see: http://www.vflyer.com/home/crlk?id=202111009&ps=16 vFlyer ID: 202111009

New 2014 Triple Axle Aluminum Boat Trailer 25

New 2014 Venture Triple Axle Aluminum Boat Trailer 25-31ft boat 10,600# boat load ratingModel VATB-10625Everything is adjustable, fits almost any powerboat this size and some sailboatsOverall length 32 ft.Includes Surge disc brakes all 3 axles, super lube hubs, LED lights, poly sleeve bunks, target bunks, load guide pole, 2 speed winch, HD yellow strap, 24-hr roadside assistance with spare tire purchase.These have aluminum wheels and fenders and I-beam frame rails, galvanized axles.I also stock tandem axle trailers just like this one.<a href="https://plus.google.com/photos/107171331854161592399/albums/5458897026492855073?banner=pwa">Photos</a>Trailer lot open by appointment only For additional information, reply to this ad or see: http://www.vflyer.com/home/crlk?id=156681044&ps=16 vFlyer ID: 156681044

2014 New Double Axle Aluminum Boat Trailer 23

New Venture 2014 Double Axle Aluminum Boat Trailer 23-25ft boat 8,725# boat load rating<a href="https://plus.google.com/photos/107171331854161592399/albums/5409168884802508017?banner=pwa">Photos</a>Overall length 29 ft.Aluminum wheels and fenders and main I-beam frame rails, galvanized axles,Surge disc brakes both axles, super lube hubs, LED lights, poly sleeve bunks [better than rollers], target bunks, loading guides, 2 speed winch, HD yellow strap, 24-hr roadside assistance with spare tire purchase.Everything adjustable, fits almost any powerboat this size and some sailboats.Also have triple axle ones with 10,600# load ratingAlso see venturetrailers.comTrailer lot available by appointment only For additional information, reply to this ad or see: http://www.vflyer.com/home/crlk?id=156655024&ps=16 vFlyer ID: 156655024

Narrow Results

Current search reset all.

• Keyword: venture sailboats
• Macgregor (3)
• Venture McGregor (2)
• Endeavour (1)
• MacGregor (1)
• Daysailer Sailboats (7)
• Sailboats (3)
• Cruiser Motorcycles (1)
• Michigan (3)
• Washington (3)
• Missouri (2)
• Georgia (1)
• Louisiana (1)
• New Jersey (1)
• New York (1)
• Wisconsin (1)
• Search Title Only
• Has Picture
• Include Sold Listings

Showcase Ads

2016 Malibu Wakesetter 22 MXZ

Browns Summit, NC

2004 Sea Ray 260 Sundancer

University of Richmond, VA

2003 Chaparral 320 Signature

Sioux Falls, SD

2018 Blue Wave 2000 SL

Corpus Christi, TX

2016 Tidewater 2200 Carolina Bay

Montgomery, AL

2015 Regal 2800

2010 Parker 2310 DV-Walkaround Boat and Trailer

Morehead City, NC

Create Alert

Please, name this search

Select Interval

Alert Successfully Created

Current time by city

For example, New York

Current time by country

For example, Japan

Time difference

For example, London

For example, Dubai

Coordinates

For example, Hong Kong

For example, Delhi

For example, Sydney

Geographic coordinates of Elektrostal, Moscow Oblast, Russia

City coordinates

Coordinates of Elektrostal in decimal degrees

Coordinates of elektrostal in degrees and decimal minutes, utm coordinates of elektrostal, geographic coordinate systems.

WGS 84 coordinate reference system is the latest revision of the World Geodetic System, which is used in mapping and navigation, including GPS satellite navigation system (the Global Positioning System).

Geographic coordinates (latitude and longitude) define a position on the Earth’s surface. Coordinates are angular units. The canonical form of latitude and longitude representation uses degrees (°), minutes (′), and seconds (″). GPS systems widely use coordinates in degrees and decimal minutes, or in decimal degrees.

Latitude varies from −90° to 90°. The latitude of the Equator is 0°; the latitude of the South Pole is −90°; the latitude of the North Pole is 90°. Positive latitude values correspond to the geographic locations north of the Equator (abbrev. N). Negative latitude values correspond to the geographic locations south of the Equator (abbrev. S).

Longitude is counted from the prime meridian ( IERS Reference Meridian for WGS 84) and varies from −180° to 180°. Positive longitude values correspond to the geographic locations east of the prime meridian (abbrev. E). Negative longitude values correspond to the geographic locations west of the prime meridian (abbrev. W).

UTM or Universal Transverse Mercator coordinate system divides the Earth’s surface into 60 longitudinal zones. The coordinates of a location within each zone are defined as a planar coordinate pair related to the intersection of the equator and the zone’s central meridian, and measured in meters.

Elevation above sea level is a measure of a geographic location’s height. We are using the global digital elevation model GTOPO30 .

Elektrostal , Moscow Oblast, Russia

• Popular Professionals
• Design & Planning
• Construction & Renovation
• Finishes & Fixtures
• Landscaping & Outdoor
• Systems & Appliances
• Interior Designers & Decorators
• Architects & Building Designers
• Design-Build Firms
• Kitchen & Bathroom Designers
• General Contractors
• Kitchen & Bathroom Remodelers
• Home Builders
• Roofing & Gutters
• Cabinets & Cabinetry
• Tile & Stone
• Hardwood Flooring Dealers
• Landscape Contractors
• Landscape Architects & Landscape Designers
• Home Stagers
• Swimming Pool Builders
• Lighting Designers and Suppliers
• 3D Rendering
• Sustainable Design
• Basement Design
• Architectural Design
• Universal Design
• Energy-Efficient Homes
• Multigenerational Homes
• House Plans
• Home Remodeling
• Home Additions
• Green Building
• Garage Building
• New Home Construction
• Basement Remodeling
• Stair & Railing Contractors
• Cabinetry & Cabinet Makers
• Roofing & Gutter Contractors
• Window Contractors
• Exterior & Siding Contractors
• Carpet Contractors
• Carpet Installation
• Flooring Contractors
• Wood Floor Refinishing
• Tile Installation
• Custom Countertops
• Quartz Countertops
• Cabinet Refinishing
• Custom Bathroom Vanities
• Finish Carpentry
• Cabinet Repair
• Custom Windows
• Window Treatment Services
• Window Repair
• Fireplace Contractors
• Paint & Wall Covering Dealers
• Door Contractors
• Glass & Shower Door Contractors
• Landscape Construction
• Land Clearing
• Garden & Landscape Supplies
• Deck & Patio Builders
• Deck Repair
• Patio Design
• Stone, Pavers, & Concrete
• Paver Installation
• Driveway & Paving Contractors
• Driveway Repair
• Asphalt Paving
• Garage Door Repair
• Fence Contractors
• Fence Installation
• Gate Repair
• Pergola Construction
• Spa & Pool Maintenance
• Swimming Pool Contractors
• Hot Tub Installation
• HVAC Contractors
• Electricians
• Appliance Services
• Solar Energy Contractors
• Outdoor Lighting Installation
• Landscape Lighting Installation
• Outdoor Lighting & Audio/Visual Specialists
• Home Theater & Home Automation Services
• Handyman Services
• Closet Designers
• Professional Organizers
• Furniture & Accessories Retailers
• Furniture Repair & Upholstery Services
• Specialty Contractors
• Color Consulting
• Wine Cellar Designers & Builders
• Home Inspection
• Custom Artists
• Columbus, OH Painters
• New York City, NY Landscapers
• San Diego, CA Bathroom Remodelers
• Minneapolis, MN Architects
• Portland, OR Tile Installers
• Kansas City, MO Flooring Contractors
• Denver, CO Countertop Installers
• San Francisco, CA New Home Builders
• Rugs & Decor
• Home Improvement
• Kitchen & Tabletop
• Bathroom Vanities
• Bathroom Vanity Lighting
• Bathroom Mirrors
• Bathroom Fixtures
• Nightstands & Bedside Tables
• Kitchen & Dining
• Bar Stools & Counter Stools
• Dining Chairs
• Dining Tables
• Buffets and Sideboards
• Kitchen Fixtures
• Wall Mirrors
• Living Room
• Armchairs & Accent Chairs
• Coffee & Accent Tables
• Sofas & Sectionals
• Media Storage
• Patio & Outdoor Furniture
• Outdoor Lighting
• Ceiling Lighting
• Chandeliers
• Pendant Lighting
• Wall Sconces
• Desks & Hutches
• Office Chairs
• View All Products
• Side & End Tables
• Console Tables
• Living Room Sets
• Chaise Lounges
• Ottomans & Poufs
• Bedroom Furniture
• Nightstands
• Bedroom Sets
• Dining Room Sets
• Sideboards & Buffets
• File Cabinets
• Room Dividers
• Furniture Sale
• Trending in Furniture
• View All Furniture
• Bath Vanities
• Single Vanities
• Double Vanities
• Small Vanities
• Transitional Vanities
• Modern Vanities
• Houzz Curated Vanities
• Best Selling Vanities
• Bathroom Vanity Mirrors
• Medicine Cabinets
• Bathroom Faucets
• Bathroom Sinks
• Shower Doors
• Showerheads & Body Sprays
• Bathroom Accessories
• Bathroom Storage
• Trending in Bath
• View All Bath
• How to Choose a Bathroom Vanity

• Patio Furniture
• Outdoor Dining Furniture
• Outdoor Lounge Furniture
• Outdoor Chairs
• Adirondack Chairs
• Outdoor Bar Furniture
• Outdoor Benches
• Wall Lights & Sconces
• Outdoor Flush-Mounts
• Landscape Lighting
• Outdoor Flood & Spot Lights
• Outdoor Decor
• Outdoor Rugs
• Outdoor Cushions & Pillows
• Patio Umbrellas
• Lawn & Garden
• Garden Statues & Yard Art
• Planters & Pots
• Outdoor Sale
• Trending in Outdoor
• View All Outdoor
• 8 x 10 Rugs
• 9 x 12 Rugs
• Hall & Stair Runners
• Home Decor & Accents
• Pillows & Throws
• Decorative Storage
• Faux Florals
• Wall Panels
• Window Treatments
• Curtain Rods
• Blackout Curtains
• Blinds & Shades
• Rugs & Decor Sale
• Trending in Rugs & Decor
• View All Rugs & Decor
• Pendant Lights
• Flush-Mounts
• Ceiling Fans
• Track Lighting
• Wall Lighting
• Swing Arm Wall Lights
• Display Lighting
• Table Lamps
• Floor Lamps
• Lamp Shades
• Lighting Sale
• Trending in Lighting
• View All Lighting
• Bathroom Remodel
• Kitchen Remodel
• Kitchen Faucets
• Kitchen Sinks
• Major Kitchen Appliances
• Cabinet Hardware
• Backsplash Tile
• Mosaic Tile
• Wall & Floor Tile
• Accent, Trim & Border Tile
• Whole House Remodel
• Heating & Cooling
• Building Materials
• Front Doors
• Interior Doors
• Home Improvement Sale
• Trending in Home Improvement
• View All Home Improvement
• Cups & Glassware
• Kitchen & Table Linens
• Kitchen Storage and Org
• Kitchen Islands & Carts
• Food Containers & Canisters
• Pantry & Cabinet Organizers
• Kitchen Appliances
• Gas & Electric Ranges
• Range Hoods & Vents
• Beer & Wine Refrigerators
• Small Kitchen Appliances
• Cookware & Bakeware
• Tools & Gadgets
• Kitchen & Tabletop Sale
• Trending in Kitchen & Tabletop
• View All Kitchen & Tabletop
• Storage & Organization
• Baby & Kids

• View all photos
• Dining Room
• Breakfast Nook
• Family Room
• Bed & Bath
• Powder Room
• Storage & Closet
• Outdoor Kitchen
• Bar & Wine
• Wine Cellar
• Home Office
• Popular Design Ideas
• Kitchen Backsplash
• Deck Railing
• Privacy Fence
• Small Closet
• Stories and Guides
• Popular Stories
• Renovation Cost Guides
• Fence Installation Cost Guide
• Window Installation Cost Guide
• Discussions
• Design Dilemmas
• Before & After
• Houzz Research
• View all pros
• View all services
• View all products
• View all sales
• Living Room Chairs
• Dining Room Furniture
• Coffee Tables
• Home Office Furniture
• Join as a Pro
• Interior Design Software
• Project Management
• Custom Website
• Lead Generation
• Invoicing & Billing
• Landscape Contractor Software
• General Contractor Software
• Remodeler Software
• Builder Software
• Roofer Software
• Architect Software
• Takeoff Software
• Lumber & Framing Takeoffs
• Steel Takeoffs
• Concrete Takeoffs
• Drywall Takeoffs
• Insulation Takeoffs
• Stories & Guides
• LATEST FROM HOUZZ
• HOUZZ DISCUSSIONS
• SHOP KITCHEN & DINING
• Kitchen & Dining Furniture
• Sinks & Faucets
• Kitchen Cabinets & Storage
• Knobs & Pulls
• Kitchen Knives
• KITCHEN PHOTOS
• FIND KITCHEN PROS
• Bath Accessories
• Bath Linens
• BATH PHOTOS
• FIND BATH PROS
• SHOP BEDROOM
• Beds & Headboards
• Bedroom Decor
• Closet Storage
• Bedroom Vanities
• BEDROOM PHOTOS
• Kids' Room
• FIND DESIGN PROS
• SHOP LIVING
• Fireplaces & Accessories
• LIVING PHOTOS
• SHOP OUTDOOR
• Pool & Spa
• Backyard Play
• OUTDOOR PHOTOS
• FIND LANDSCAPING PROS
• SHOP LIGHTING
• Bathroom & Vanity
• Flush Mounts
• Kitchen & Cabinet
• Outdoor Wall Lights
• Outdoor Hanging Lights
• Kids' Lighting
• Decorative Accents
• Artificial Flowers & Plants
• Decorative Objects
• Screens & Room Dividers
• Wall Shelves
• About Houzz
• Houzz Credit Cards
• Privacy & Notice
• Cookie Policy
• Your Privacy Choices
• Mobile Apps
• Copyright & Trademark
• For Professionals
• Houzz vs. Houzz Pro
• Houzz Pro vs. Ivy
• Houzz Pro Advertising Reviews
• Houzz Pro 3D Floor Planner Reviews
• Trade Program
• Buttons & Badges
• Your Orders
• Shipping & Delivery
• Return Policy
• Houzz Canada
• Review Professionals
• Suggested Professionals
• Accessibility
• Houzz Support
• COUNTRY COUNTRY

Home & House Stagers in Elektrostal'

Location (1).

• Use My Current Location

Popular Locations

• Albuquerque
• Cedar Rapids
• Grand Rapids
• Indianapolis
• Jacksonville
• Kansas City
• Little Rock
• Los Angeles
• Minneapolis
• New Orleans
• Oklahoma City
• Orange County
• Philadelphia
• Portland Maine
• Salt Lake City
• San Francisco
• San Luis Obispo
• Santa Barbara
• Washington D.C.
• Elektrostal', Moscow Oblast, Russia

Featured Reviews for Home & House Stagers in Elektrostal'

• Reach out to the pro(s) you want, then share your vision to get the ball rolling.
• Request and compare quotes, then hire the Home Stager that perfectly fits your project and budget limits.

A home stager is a professional who prepares a house for sale, aiming to attract more buyers and potentially secure a higher selling price. They achieve this through the following techniques:

• Rearranging furniture to optimize space and functionality.
• Decluttering to create a clean and spacious look.
• Making repairs to address visible issues.
• Enhancing aesthetics with artwork, accessories, and lighting.
• Introducing new furnishings to update the style.

Their goal is to present the house in the best light. Home stagers in Elektrostal' help buyers envision themselves living there, increasing the chances of a successful sale.

• Home Staging
• Decluttering
• Furniture Selection
• Space Planning
• Art Selection
• Accessory Selection

Benefits of the home staging in Elektrostal':

• Attractive and inviting: Staging creates a welcoming atmosphere for potential buyers.
• Faster sale: Homes sell more quickly, reducing time on the market.
• Higher sale price: Staging can lead to higher offers and appeal to a wider range of buyers.
• Showcasing best features: Strategic arrangement highlights positives and minimizes flaws.
• Stand out online: Staged homes capture attention in online listings.
• Emotional connection: Staging creates a positive impression that resonates with buyers.
• Easy visualization: Buyers can easily picture themselves living in a staged home.
• Competitive advantage: Staging sets your home apart from others on the market.
• Affordable investment: Cost-effective way to maximize selling potential and ROI.
• Professional expertise: Experienced stagers ensure optimal presentation for attracting buyers.

What does an Elektrostal' home stager do?

What should i consider before hiring an interior staging company, questions to ask potential real estate staging companies in elektrostal', moscow oblast, russia:, business services, connect with us.

Electrostal History and Art Museum

Most Recent: Reviews ordered by most recent publish date in descending order.

Detailed Reviews: Reviews ordered by recency and descriptiveness of user-identified themes such as wait time, length of visit, general tips, and location information.

Electrostal History and Art Museum - All You Need to Know BEFORE You Go (2024)

• (0.19 mi) Elektrostal Hotel
• (1.21 mi) Yakor Hotel
• (1.27 mi) Mini Hotel Banifatsiy
• (1.18 mi) Elemash
• (1.36 mi) Hotel Djaz
• (0.07 mi) Prima Bolshogo
• (0.13 mi) Makecoffee
• (0.25 mi) Amsterdam Moments
• (0.25 mi) Pechka
• (0.26 mi) Mazhor