ta chiao sailboat

Jordan Yacht Brokerage

We Never Underestimate Your Dreams

Ta chiao ct 54/56 review: perry pirate ship.

The CT 54/56 design started when Robert H. Perry was working for Jay Benford, a Ferro-cement builder, in Seattle, WA. National Fisherman published a 47-foot ketch designed by Perry that attracted the attention of John Edwards. Edwards was looking to start a boat builder with construction in Taiwan and sent a letter to Perry. In 1972, Perry began drawing for Edwards even as he started a new job in Dick Carter’s design office. Edwards soon found that building in Taiwan would be even less inexpensive than he originally thought. They increased the design to a 54-foot ketch. The yard would be Ta Chiao which means “Big Bridge” in Mandarin. Perry describes the design as his version of “the type of boat Bill Garden did…when I was young his influence was so heavy I’d have to fight it.” While attributed to Perry and inspired by Garden, Ted Brewer played a significant role. According to Don Gibson who was the exclusive US distributor of CT’s, the 54 is more a Brewer design while the 65 CT is classic Perry. Bob Perry writes about Brewer’s involvement, “The CT 54 was my very first GRP design and I asked Ted Brewer to help me with the structure and to generally look over my shoulder while I was working on the design.”

Famously after submitting the design to Taiwan, the yard sent back a wooden model perfectly carved except for the transom. A note said that they could figure out everything except the transom. Could he please carve his transom and send the model back? Perry says, “I’m not good with tools. I just froze up. Not knowing what to do, I went to the hardware store and bought a Surform rasp.” He carved half the transom and knowing he couldn’t replicate it, he stopped there and sent the model back.

While originally designed for Hans Christian Yachts, the design switched hands and became the first of Ta Chiao Brother’s CT series. Perry explains that John Edwards only paid him $350 of the agreed upon $700 commission for the design. One day, he received a call from C.T.Chen, the president of Ta Chaio. They agreed that if C.T. paid him the rest of the commission he would own the rights to the design. After receiving an Express Mail check for $750 which was more than the $350 outstanding, Perry wrote a letter to this affect which was produced in court in Taiwan. Perry and John Edwards never spoke again. Edwards went on to found Hans Christian Yachts with a different designer and Taiwanese yard.

Ta Chiao built 104 hulls from 1975 until 1986 when the mold wore out. But people were still clamoring for the design, so they made the 56-foot mold. They produced about a dozen of these 56’s. At this point, Don Gibson, the US importer and Michel Tissier, the European importer, got into a disagreement. They were expanding to a CT 48 design, but they disagreed what she should look like. The yard sided with Michel who wanted a more modern design with an unbroken sheerline. Don refused to import the CT 48. Soon, Michel went out of business, but Don was still at odds with Ta Chiao. The whole organization petered out. Although the CT series is gone, Ta Chiao was still distributing parts for the CT 54/56 as recently as 2 years ago to current owners.

First Impressions The CT 54/56 is a handsome, old fashioned, stout looking cutter-ketch. She is 54 foot on deck and 62 overall. The bow flairs clipper style with a 8 foot bowsprit and trailboards giving her that classic look. She has a two piece dolphin striker with a teak baluster. Her molded hull seams look like wooden planking, and the low freeboard and striking sheer give her personality like a Garden design. The teak caprail and raised quarterdeck have carved ornate teak handrailing. While forward she has a half inch bulwark, the raised deck aft is nearly flush with the caprail.

Ta Chiao really varied the design of these CT’s. Ta Chiao actually produced two different versions of the cabintrunk. One had a Robert Perry deck and another was modified by the yard. The yard’s version increased the headroom which was too low in Perry’s original design. Perry says, “I think about three-quarters of the 54s had the yard’s deck,” in his autobiography, Design According to Perry . One I recently previewed had a total of fourteen bronze portholes with three forward and four aft on each side. An owner told me that his has sixteen portholes with eight on each side. Later on another I previewed, I counted six portholes on each side. While both of the ones I previewed and his have four square portholes on the pirate stern, he has seen those with two or three on the stern. Underneath, she has a very full keel and attached rudder. Perry describes her a big keelboat with a nice shape. The deadrise is moderate and garboards thin. Her beam is 15.1′ – about an expected figure. Perry writes that he thinks the 56 is a much better design. He “fined up the bow, decreased the angle of entry considerably to make the boat faster on the wind…flattened the buttocks” for speed.

The CT Yahoo Groups owners association is the pre-eminent place for CT enthusiasts. On their home page they write about what attracted them to own a CT. The CT’s “classic lines are incomparable in their grace, and a joy to the eye, inspiring conversation and admiration wherever a CT54 CT56 goes. One of the safest and most comfortable yachts ever built. Flexibility to serve for entertaining, as a world cruiser or local live aboard – in comfort and style.”

Construction CT 54’s can generally be broken into two era’s of construction. From 1975 to 1981, Ta Chiao was learning and made some mistakes. The deck and cabintrunks are prone to leaks and rot. These boats are considered lower in quality and “leaky teaky.” In 1981, Ta Chiao upgraded their techniques. They made a 4 inch thick deck cored with plywood. They sandwiched a 2 1/2 inch core layer of plywood between top and bottom layers of 3/4 inch fiberglass. This change fixed the deck leaks and rot so common with the earlier construction. A good way to inspect the deck layering is by opening up the emergency steering fixture aft.

Another progressive change was a switch to modern aluminum rigs and stainless hardware. Most of the early CT 54’s had spruce spars and bronze chocks and portholes. As time went on, more and more CT’s were rigged with aluminum spars and stainless hardware. Whether spruce or aluminum these masts are keel stepped. Ta Chiao continued to refine and improve their construction techniques. The later the build year generally the better quality build. The CT 56’s are the highest quality but quite a bit more expensive. All have solid fiberglass hull layup, encapsulated ballast, keel stepped masts. The ballast consists of a mixture of lead and sand according to one owner. Forward the deck mold is lower and uses a bulwark hull-deck joint while the raised quarterdeck is the standard inner flange.

When first built, owners would stay and oversee construction in Taiwan. Another owner comments, “The CT54/56 build quality had ALOT to do with how the buyer/owner was involved with the layup and not what year the boat was built in. I have personally seen many CT’s of the 80’s and 90’s that were in very poor shape so to make a blanketed statement that anything before a 81 is junk seems silly.” Some owners stayed longer than others. The yachts where the owners stayed the longest are thought to have the best care during construction at Ta Chiao. It is irresponsible to make a blanket condemnation of pre-1981 CT 54’s.

Perry notes that although he and Ted Brewer produced a laminate schedule and structural layout, Ta Chiao did not follow any of this work. They “called fro multiple hatsection longitudinals, but the yard used a beefy single-skin laminate with no longitudinals. In those days, especially in Taiwan, there was no structural problem that could not be overcome with more mat and roving.” This means that at least the early 54’s had little structural framing to stiffen the hull.

What To Look For “Don’t touch CT 54’s before 1981,” told one owner. “That is unless the price is really low. The construction techniques were really bad.” That seems harsh, but you should definitely be wary of any CT 54 and more so the earlier the build date. Leaky teaky characterizes the CT 54 build reputation. While heavily laid up, the Ta Chiao Brothers had not quite hit their stride. No matter the year, the deck ought to be carefully looked at and after 30 years is due for replacement or removal. The early model cabintrunks are commonly rotten. The spruce spars and mast step should be checked for rot. Any original stainless steel from the 1970’s Taiwan is suspect and prone to pitting.

All 54/56’s have significant teak on deck, and must be taken care of or quickly, the boat will show poorly. If not properly cared for, the seams of the teak cap railing can look like sore, bloody wounds. The CT’s are high maintenance yachts but well worth it and beautiful when properly cared for. The teak decks can be removed. If there has been a modernizing, check out the workmanship. The rudder is common problem on CT’s. These rudders are hollow and ship water. One particularly fastidious owner after purchasing his 54 saw the rudder leaking water after haul-out. He ordered a new rudder which dully came, and he installed. The next time he hauled, sure enough, the water poured out of the rudder. The most common owner modification to prevent a soggy rudder and resulting delamination is to drill holes in and fill the hollow with PVC foam, an easy and effective solution. This prevents delamination and corrosion, the main worries. Even Nautor Swan rudder are usually full of water. The goal is not a dry rudder but a durable one.

On Deck The teak bowsprit forward is wide and easy to mount. The windlass will probably be a giant, archaic looking piece of hardware. The deck should be leaky teaky with mitered edge pieces and black cocking. Two dorades give ventilation from the foredeck. Chainplates mount through the outer edge of the deck. These have self-tacking booms on the inner staysail which clutters up the foredeck. The raised quarterdeck is a good two foot step up. The primary winches vary in location and size. They can be mounted outside of the cockpit on stainless flanges or normally mounted on the combing top. The cabin trunk continued a little ways aft. Two dorades give ventilation to the aft stateroom.

Your impression of the cockpit will depend on the version. Ta Chiao built owner versions that have a smaller cockpit with high combings. It is difficult to lie down on the port and starboard benches. They built charter versions that have a very large cockpit with low combings. These have pretty long seating which is comfortable for lying down and oddly are more sought after by owners. One owner notes, “I often was sailing shorthanded with just another person. Ours was an charter cockpit. One of us would sleep on the benches which are long and comfortable. It was great.” In 1986 when the 54 molds wore out, Ta Chiao created the 56 which lengthened the cockpit. One of the main differences between the 54 and 56 is a fore and aft split cockpit. A navigation area is aft while forward is an entertaining area. The companionway opens with louvered doors and a handle.

Down Below When you first go below, you feel like you are descending the upper story of a palace. The widening stairway gives the entrance a pomposity. The raised saloon has a settees port and starboard. The layouts vary as Ta Chiao produced these on a very custom basis. One owner says, “Of the 12 or so CT54s I have seen, no two were alike, especially below deck.” On some the galley is starboard paired with a portside dinette both forward of the salon while on most others it seems these are aft of the saloon. Forwardmost is usually a V-berth and guest head port with shower. Aft of the saloon, both sides walkthrough to a master stateroom. Most have four stateroom layouts with port and starboard berths here. Aftmost, the island queen or athwartship king is cozy with excellent light from the hatch above, a porthole on each side, and the stern pirate portholes along with a large master head with separate stall shower. The wood used in the interior varies. The sole may be parquet flooring or teak and holly. The cabinetry and paneling is solid teak. The yard allowed owners to choose the color of teak from honey colored to dark purplish almost like mahogany.

Engine CT 54’s generally have 120 HP or 135HP Ford Lehmans under the saloon. Some rare versions have a large Perkins diesel. To access the engine room, you pull up the saloon floorboards. They break up in many pieces. Port and starboard are fuel and water tanks. Forward is room for a generator. Forwardmost is another 200 gallon fuel tank. This engine setup really opens up the living space. With the engine and tankage below, you have more room for accommodations. The setup is similar to the Gulfstar Sailmaster 47 though lower in the bilge which leads to better stability. The disadvantages are the disruption for using the saloon. Though once you get a hang of the floorboard layout, the disruption is minimal – one board for checking oil or batteries or any of the tanks. Expect to replace the black iron tanks if they have not been. These last 20 years. The fuel tanks consist of two saddle tanks and another tank forward. Access to the engine, generator, and tanks is relatively simple except for the forward tank. To remove this fuel tank, you have to take out the forward bulkhead and saw the tank out. With all this tankage, you can cruise for awhile without refueling.

Underway Bob Perry says about seatrialing the first 54, “Blasting around San Francisco Bay on my very first design was something I’ll never forget…the helm balance was perfect, as far as I could tell with the boat’s hydraulic steering. Ted Brewer convinced me to increase the size of the rig…this turned out to have been a good move. It was a great-looking boat, salty as hell.” One owner notes how “the staysail and mizzen beautifully balance each other. I have cruised going 9.5 knots under staysail and mizzen.” She is a long range cruiser with a soft motion and surprising legs. And clearly she can handle heavy weather. One owner was off Cape Hatteras in 50 foot seas and kept going fine. Along with modifying the cockpit for the 56, Perry changed the underbody of the 56. He cutaway the forward section of the long keel. This reduced the wetted surface of the 56 making her more sprightly than the 54, but then she does not sail to weather quite as well as the 54 with the fuller keel. Perry made the keel more distinct from the hull and flattened the buttocks for better speed.

Conclusion CT 54’s are old world cruisers with strong layup. Robert Perry ostensibly designed her with inspiration from Bill Garden and guidance from Ted Brewer. Her graceful clipper bow, pirate stern, shapely sheer will be sure to get compliments in any harbor. One brokerage 54 is located in Fort Lauderdale and asking $219,000 and a couple brokered ones in Europe for $175,000 and $250,000. A 56 in Fort Lauderdale is asking $339,000. An older 1978 CT 54 looks overpriced at $550,000 in Mexico. Upkeep is significant on these yachts. Well-maintained ones are gorgeous. One side benefit is a helpful owners association on Yahoo Groups which you should contact for more information about these fine yachts.

17 Replies to “Ta Chiao CT 54/56 Review: Perry Pirate Ship”

There seems to be ALOT of misinformation in this review. Our boat is a 1978 and our boat is plywood covered top and bottom with fiberglass. Also, the joinery work is as beautiful if not more beautiful than any other CT I have seen including a 1990’s CT65. The CT54/56 build quality had ALOT to do with how the buyer/owner was involved with the layup and not what year the boat was built in. I have personally seen many CT’s of the 80’s and 90’s that were in very poor shape so to make a blanketed statement that anything before a 81 is junk seems silly. I will not pick apart the whole review as I do not have the time but really think you need to go back to the drawing board on this one.

Thanks. I updated the review to incorporate your input. I would be interested if you can verify that pre-1981 54’s have smaller cockpits. I really appreciate your critique.

We have a 1978 which was considered the “owner’s version” and it does have a smaller cockpit with high combings. Our friends have a 1979 that is considered the “charter version” and it has a very large cockpit with low combings. Each of these boats are quite different even though they were built only a year apart, the quality is also quite a bit different is as the joinery. Also, our 1978 has spruce spars (original from factory) and our friends 1979 has aluminum (original from the factory). I hope this helps some and I appreciate you looking at this again.

The ct-56 is a big, comfortable gin palace with plenty sail and hp. We slogged, ran and motored from Mobile Bay to Miami in 93 hrs. The ice maker stopped working. I would do it again. Good sea boat but the teak is death and taxes. rp

Who was left with the 56 mold when they went belly up?

I have an email into Ta Chaio, who are still building boats. You could check with R. Perrry as well. As far as I know, the tooling is still at Ta Chaio. Why? Do you want to build a new one? Financially, I do not think that would be a good idea.

Mr. Chen says they do not have the mold but would be interested in cooperating with people. Send them a note. See their website at http://www.tachiao.com for contact details.

Thanks Richard. I contacted them last week via email. It was very difficult to understand their status and your post helps a lot.

Rick, I keep mistaking your name as rob perry – same initials. I wonder if Bob will ever comment here. I know he hangs out around blogs and forums of the internet. Hey Bob, are you out there?

Can anyone help me with, or suggest where I can obtain the stability figures,and or the inclination test results for the Ta Chiao 54

Are there any drawings or plans of the 56 layout available?

This is My Dads’s Boat . the first one made , I can tell it’s a great sailor  fast and dry  he’s lived on it for about 30 years now

the first name was Zozo  now  she is  Called               Wahsoune

Hey, Anonymous, there’s no such word as “ALOT.”

Shit, are u a english teacher?

Perry still sells them!

could anyone provide me with the sail plan for a Perry 47 ketch central cockpit ?

Leave a Reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Boats for Sale

New and used Ta Chiao boats for sale

• Ta Chiao 56 Ketch
• Ta Chiao CT 54

Find your perfect Ta Chiao today. We have Ta Chiao brokers and sellers from around the world at great prices.

History of Ta Chiao

Ta Chiao Brothers Yacht Building Company Ltd, popularly known as Ta Chiao, is a distinguished boat manufacturing company that was established in 1957 in Taipei, Taiwan. For over half a century, Ta Chiao has become renowned for its remarkable craftsmanship in designing and building sailboats and motor yachts. The company started their voyage into the boat manufacturing industry specialising in traditional wooden yachts, which eventually underwent a transition into constructing fibreglass hull yachts during the 1970s. Ta Chiao's early contributions to the yachting world were greatly recognised for their superior teak interiors and hefty hand-laid fibreglass hulls.

The company excelled in the manufacturing of exquisite yachts, specifically with models like CT 34, CT 41, CT 47 among others showcasing the 'CT' prefix, which stands for 'Chiao Ta'. This reinforced fiberglass constructed series gained global popularity during the late '70s and '80s with their traditional conservative designs featuring lasting stability and strength.

Although based in Taiwan, Ta Chiao extended its horizons to the global market and successfully left its mark. Today, it stands as a synonym for quality, safety, and uniqueness in the boat manufacturing industry. Ta Chiao continues to provide services from its headquarters in Taipei, Taiwan, producing high-quality, luxurious yachts and has become synonymous with remarkable craftsmanship and innovation over the decades. Despite facing stiff competition in a rapidly evolving industry, Ta Chiao continues to hold its own, witnessing a compelling blend of tradition and modernity in their creations.

How much does a boat from Ta Chiao cost?

Used boats from Ta Chiao on TheYachtMarket.com range in price from £164,000 GBP to £388,000 GBP with an average price of £276,000 GBP . A wide range of factors can affect the price of used boats from Ta Chiao, for example the model, age and condition.

Sign up to our newsletter

By submitting this form, you agree to our Privacy & Cookie Policy

Change units of measure

This feature requires cookies to be enabled on your browser.

Show price in:

Show lengths, beam and draft in:

Show displacement or weight in:

Show capacity or volume in:

Show speed in:

Show distance in:

JavaScript seem to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website.

Edwards Yacht Sales

• 866.365.0706

1982 Ta Chiao CT54

• Panama City, FL, US

Yacht price

• Email Broker
• Call Broker

In the midst of a complete refit

Stunning world class sailing yacht, 62 feet overall, fast, secure, stable and ready to take you anywhere in the world.  This boat is being completely repowered and refit... a crate rebuild Ford Lehman 120 and transmission, brand new Phaser 12kw generator, new Ray Marine electronics, new refrigeration, new reverse cycle marine air conditioning, new washer dryer, four private cabins, two heads, massive salon, well appointed galley, dining space for six, huge primary suite with queen berth, beautiful transom lights, updated standing and running rigging, Staysail Ketch rigged which gives you the most options for just about any sailing condition.

Advanced co brokerage Florida Sail is pleased to assist you in the purchase of this vessel. This boat is centrally listed by At Ease Yacht Sales.

Specifications

Descriptions, basic information, dimensions & weight, accommodations.

• View Option

Manufacturer

Length Range Length Range

Year Range Year Range

Price Range Price Range

QUICK SEARCH BY:

Buyer services, featured yacht.

2006 American Tug 34 Pilothouse Trawler

2019 Monachus Issa 45

2021 Stamas 390 Aegean

2001 Wellcraft Martinique 3700

1985 Morgan 31 Off Shore Fishing Cuddy

2002 Hunter 450 Passage

2001 Hatteras Sportfish

1981 Hatteras 48 Motor Yacht

1985 Ocean Yachts 55 Super Sport

1996 Tiara Yachts 3500 Express

2007 Sea Ray Sundancer 40

2007 Hunter 44 Deck Salon

2007 Meridian 391 Sedan

2002 Linssen 470 Grand Sturdy

• Google Plus
• Boats For Sale
• Brokerage Services
• Sold Yachts

Whether you are buying or selling your next boat or your first boat, one of Edwards Yacht Sales 45+ Professional Yacht Brokers throughout the Southeast are here to assist. Since 2003 we have acted as our clients trusted advisor throughout the entire process from shopping, to making an offer, to sea trial and survey, to closing.

Corporate Office: 510 Brookside Drive Clearwater, FL 33764

Email: [email protected]

Phone: 727.449.8222 Toll Free: 866.365.0706 Fax: 727.298.0456

Copyright © 2024 Edwards Yacht Sales Do Not Sell My Personal Information Powered by YachtCloser

We have placed cookies on your device to help make this website better.

You can use this tool to change your cookie settings. Otherwise, we’ll assume you’re OK to continue.

Some of the cookies we use are essential for the site to work.

We also use some non-essential cookies to collect information for making reports and to help us improve the site. The cookies collect information in an anonymous form.

To control third party cookies, you can also adjust your browser settings .

Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.

• Sailboat Guide

CT-35 is a 35 ′ 0 ″ / 10.7 m monohull sailboat designed by William Garden and built by Ta Chiao starting in 1975.

Rig and Sails

Auxilary power, accomodations, calculations.

The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.

Classic hull speed formula:

Hull Speed = 1.34 x √LWL

Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL

Sail Area / Displacement Ratio

A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.

SA/D = SA ÷ (D ÷ 64) 2/3

• SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
• D : Displacement in pounds.

Ballast / Displacement Ratio

A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.

Ballast / Displacement * 100

Displacement / Length Ratio

A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.

D/L = (D ÷ 2240) ÷ (0.01 x LWL)³

• D: Displacement of the boat in pounds.
• LWL: Waterline length in feet

Comfort Ratio

This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.

Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )

• D: Displacement of the boat in pounds
• LOA: Length overall in feet
• Beam: Width of boat at the widest point in feet

Capsize Screening Formula

This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.

CSV = Beam ÷ ³√(D / 64)

Said to be based on an earlier W. Garden design though not directly attributed to him in any sales literature. The CT 35 was first imported to the US by Seaboard Marine, Inc., then Imperial Yachts of California in 1977, then Annapolis Yacht Shop out of Maryland in 1980. By 1981, Seaboard Marine had returned to sell the last few boats. Cutter or ketch. LOA w/bowsprit: 42’. (total numbers unknown). A dual station pilot house version seems to be the most common.(drawing shown) Std. trunk cabin version shown in photo.

Embed this page on your own website by copying and pasting this code.

• About Sailboat Guide

©2024 Sea Time Tech, LLC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.