how to build your own catamaran

How to Build a Catamaran Boat? (Step-by-Step Guide)

Building a catamaran boat from scratch is a rewarding and challenging endeavor.

It takes a combination of skill, dedication, and hard work to craft a seaworthy vessel.

In this step-by-step guide, you’ll learn how to design and size your catamaran, gather the necessary materials, cut and assemble the pieces, lay fiberglass and apply epoxy, make finishing touches, add hardware and paint, and rig the boat.

With the right tools, planning, and patience, you can make your dream of sailing in a catamaran a reality.

Table of Contents

Short Answer

Building a catamaran boat requires a lot of patience and skill.

The first step is to choose the right materials for the hull, such as fiberglass, wood or aluminum.

Then, you will need to build the frame of the boat, which includes the crossbeams and the main hull.

After that, you will need to install the decking, the rigging, and other components.

Finally, you will need to paint and varnish the boat, as well as install the outboard motor and other accessories.

Design & Size Considerations

When it comes to building a catamaran boat from scratch, the first step is to determine the design and size of the boat.

This should take into account the intended use of the boat, such as sailing, fishing, or leisurely cruising.

The size of the boat will depend on the number of passengers and the type of activities the boat will be used for.

For instance, a larger boat may be needed if passengers will be standing or participating in watersports.

The design of the boat is also important and should be chosen based on the intended use.

If you are looking to build a sailboat, you will need a design that is optimized for sailing.

On the other hand, if you are looking to build a fishing boat, you will need a design that is optimized for fishing.

There are a wide variety of boat designs available, so it is important to research and choose the one that best suits your needs.

In addition to the design and size, you will also need to consider the materials used for construction.

The most common materials for building a catamaran boat are wood, fiberglass, and epoxy.

Each material has its own advantages and disadvantages, so it is important to research them and determine which one is best for your project.

Finally, you will need to consider the cost of the project.

Building a catamaran boat from scratch can be a costly endeavor, so it is important to have a budget in mind before you begin.

The cost will depend on the type of materials used and the complexity of the design.

It is also important to factor in the cost of any tools that may be needed for the project.

By taking into account the design and size, materials, and cost of the project, you can be sure to build a catamaran boat that meets your needs and budget.

With the right amount of patience and attention to detail, you can build your own catamaran boat in no time.

Gathering Materials

Gathering the materials needed to build a catamaran boat from scratch can be a daunting task, but it is essential for creating a sturdy and safe vessel.

Before starting the building process, it is important to have an accurate and detailed plan for the boats design and size.

Once a plan is in place, it is time to begin sourcing the necessary materials.

The most common materials used to construct a catamaran boat are wood, fiberglass, and epoxy.

When choosing wood, it is best to select a species of timber that is strong and durable, such as mahogany, teak, or cedar.

Additionally, the wood should be clear and free of knots, splits, and other defects.

Fiberglass is a lightweight fabric that is resistant to water and provides additional strength to the boats hull.

Epoxy is a waterproof adhesive that is used to seal the boat and ensure that it is watertight.

It is important to ensure that the materials are of high quality, as this will help to ensure the boats longevity.

Additionally, it is important to purchase the necessary materials in the correct amount and size.

Too little or too much of a material can be a costly and time-consuming mistake.

Finally, it is important to keep any leftover materials for future repairs or modifications.

With the right materials gathered, the next step is to cut the wood and begin the assembly process.

Cutting & Assembly

Cutting and assembly are the most important steps when it comes to building a catamaran boat from scratch.

The first step is to decide the design and size of the boat.

This will determine the type of materials you need to gather and the amount of effort that needs to be put into the project.

After deciding on the design and size, you will need to cut the wood to fit the design.

This includes cutting the wood to the desired size, as well as cutting any additional pieces that may be needed to complete the design.

It is important to ensure that all the pieces fit together correctly and securely, as any mistakes could lead to a weak boat.

Once the wood has been cut, it is time to assemble the pieces together.

This involves attaching the pieces together with glue, screws, and nails, and ensuring that the pieces fit together securely.

It is important to be careful and patient when assembling the pieces, as any mistakes could result in a weak and unstable boat.

Once the frame is ready, it is time to lay the fiberglass, and apply the epoxy to seal the boat.

This is an important step, as it will make sure that the boat is waterproof and durable.

Finally, you can add the finishing touches, such as the hardware, paint, and rigging.

With the right amount of patience and attention to detail, you can have your own custom catamaran boat in no time.

Laying Fiberglass & Applying Epoxy

When laying the fiberglass and applying epoxy, it is important to take your time and be precise.

Fiberglass and epoxy are key components of a catamaran boat, as they provide the strength and waterproofing necessary to keep the boat afloat.

Start by laying the fiberglass over the frame of the boat.

Make sure to cut the fiberglass to size and overlap the edges for a strong seal.

Once the fiberglass is in place, mix the epoxy and begin to apply it.

It is important to apply the epoxy in a thin, even layer to ensure a proper seal.

Make sure to move the epoxy around to get it into all the nooks and crannies of the boat.

Allow the epoxy to cure and then you can begin to add the finishing touches.

Finishing Touches

Once the frame of the catamaran boat is built, it is time to add the finishing touches.

This includes adding the necessary hardware, painting, and rigging the boat.

Hardware: Before adding the hardware, it is important to ensure that the frame is stable and secure.

Add the appropriate hinges, screws, and nails to the frame.

Make sure that the screws and nails are the correct size and do not exceed the recommended load capacity of the frame.

Painting: Once the hardware is added, it is time to paint the boat.

Choose a paint that is suitable for the materials used in the construction.

Make sure that the paint is applied evenly and that the frame is completely dry before applying the next coat.

Rigging: The last step is to rig the boat.

This involves attaching the sails, running rigging, and standing rigging to the masts and booms.

Make sure that the rigging is properly tensioned and secured.

Once all of these steps are complete, your catamaran boat is ready to sail.

Hardware & Paint

The last step in building a catamaran boat is to add the hardware and paint.

This step is often the most rewarding, as it is the finishing touch.

Depending on the design of your boat, there are various types of hardware you may need.

Some of the most common items are cleats, winches, fasteners, and decking.

After selecting the required hardware, you will need to install them on the boat.

It is important to use the correct type of screws and bolts, and to secure them tightly.

Once the hardware is installed, it is time to apply the paint.

The type of paint and color you choose will depend on the design of your boat.

It is important to use a high-quality marine grade paint that is designed to handle the extreme environment of the ocean.

If you are up to the challenge, you can add some custom artwork or detail to your catamaran boat.

Adding the hardware and paint is the final step in building a catamaran boat.

With patience and attention to detail, you can create a beautiful and unique boat that will last for many years.

Be sure to take your time and enjoy the process of constructing your own boat.

Once you have finished the frame, fiberglass, and epoxy of your catamaran boat, you will need to move onto the rigging.

This is a crucial step in the construction process, as it will keep your boat safe and secure on the water.

When rigging a catamaran, there are a few key components that must be taken into account.

First, you will need to determine the type of rigging you will be using.

Typically, catamarans use a combination of standing and running rigging.

Standing rigging consists of cables and lines that stay in a fixed position to provide stability and strength to the boat, while running rigging consists of lines that are used to adjust the sail and mainsheet.

Additionally, you will need to choose the right type of rope and hardware for your rigging setup.

The rope should be strong and durable, and the hardware should be made of stainless steel and be corrosion-resistant.

Once you have chosen the type of rigging and hardware, you can start assembling the rigging lines.

This process involves carefully measuring and cutting the lines to the proper lengths, and then attaching them to the mast and boom.

Depending on the type of rigging setup, you may also need to attach the lines to the hulls and deck.

It is important to inspect the rigging lines and hardware regularly to ensure that everything is secure and in proper working order.

Rigging a catamaran boat can seem like a daunting task, but it is essential for the safety and comfort of your vessel.

With the right tools, materials, and attention to detail, you can successfully and safely rig your catamaran boat.

Final Thoughts

Building a catamaran boat is a rewarding experience that requires patience and attention to detail.

With the right plan, materials, and steps, you can build your own boat in no time.

Now that you know the basics of how to build a catamaran boat, why not grab your tools and get started on your very own project? With the right motivation and dedication, you can make your dream of owning a catamaran boat a reality.

James Frami

At the age of 15, he and four other friends from his neighborhood constructed their first boat. He has been sailing for almost 30 years and has a wealth of knowledge that he wants to share with others.

Recent Posts

Does Your Boat License Expire? Here's What You Need to Know

Are you a boat owner looking to stay up-to-date on your license requirements? If so, youve come to the right place! In this article, well cover everything you need to know about boat license...

How to Put Skins on Your Boat in Sea of Thieves? (Complete Guide)

There is a unique sense of pride and accomplishment when you show off a boat you customized to your exact specifications. With Sea of Thieves, you can customize your boat to make it look like your...

Catamaran Plans: Design, Build and Sail your own Multi-Hull Boat

Table of Contents

Why Build a Catamaran: The Benefits of Multi-Hull Boats

Building a catamaran offers many benefits over traditional monohull boats. One of the main advantages of catamarans is their stability. With two hulls instead of one, catamarans have a lower center of gravity, which makes them less likely to tip over in rough waters. This makes them ideal for families with children, or for anyone who wants to feel more secure while on the water.

Another benefit of catamarans is their increased speed and efficiency. The two hulls of a catamaran can displace more water than a single hull, which means they can move through the water faster and with less resistance. This makes them ideal for racing or for anyone who wants to cover more ground in less time. Additionally, Catamarans are also known for their space, as the twin-hull design provides more room for living and storage than a monohull.

Catamarans also offer more flexibility in terms of design. The two hulls of a catamaran can be configured in many different ways, which allows for a wide range of customization options. For example, one hull can be used for sleeping quarters, while the other can be used for storage or as a cockpit. This makes catamarans ideal for long-term cruising or for anyone who wants to create a unique and personalized boat.

Finally, catamarans are also more environmentally friendly than monohulls. Because they are more efficient, they can move through the water with less fuel consumption, which reduces their carbon footprint. Additionally, many catamaran designs incorporate solar panels and other renewable energy sources, which makes them ideal for anyone who wants to minimize their environmental impact while enjoying the water.

Designing Your Own Catamaran: Tips and Tricks

Designing your own catamaran can be a challenging but rewarding experience. Before you begin, it’s important to consider your needs and goals for the boat. Are you planning to use it for racing, cruising, or a combination of both? How many people will be on board? What kind of conditions will you be sailing in? Answering these questions will help you to determine the size, shape, and features of your catamaran.

One important tip when designing your catamaran is to keep it simple. While it can be tempting to add a lot of bells and whistles, the more complex your design, the more difficult and expensive it will be to build and maintain. Instead, focus on creating a functional and efficient boat that meets your needs.

Another tip is to take into account the materials you will be using. Different materials have different properties and costs, so it’s important to choose the right ones for your design. For example, wood is a traditional and affordable material, but it requires more maintenance than fiberglass. On the other hand, composites materials are more expensive but offer great weight to strength ratio.

Finally, it’s important to consult with experts and professionals during the design process. There are many resources available, such as online forums, books, and classes, that can help you to learn more about catamaran design and construction. Additionally, you should consider consulting with naval architects, boat builders, and other experts who can offer guidance and feedback on your design. They can help you to refine your ideas and ensure that your boat is safe and seaworthy.

Materials and Tools Needed for Building a Catamaran

Building a catamaran requires a variety of materials and tools. The materials you will need will depend on the design of your catamaran and the type of construction you choose. Common materials used in catamaran construction include wood, fiberglass, composites, aluminum, and PVC. Each material has its own unique properties and benefits, so it’s important to choose the right one for your project.

When it comes to tools, you will need a basic set of hand and power tools to complete your catamaran project. These include saws, drills, sanders, and other tools that are commonly used in woodworking or metalworking. Additionally, you will need specialized tools such as a router, a band saw, and a vacuum bagging system if you are building with composites materials.

In addition to the above tools, you will also need safety gear, such as goggles, respirators, and ear protection. Building a catamaran can be a challenging and time-consuming process, so it’s important to take the necessary precautions to protect yourself and others. Additionally, it’s important to have a well-ventilated workspace, as some of the materials and chemicals used in catamaran construction can be harmful if inhaled.

Common Mistakes to Avoid When Building a Catamaran

Building a catamaran can be a complex and challenging process, and it’s easy to make mistakes if you’re not careful. Here are some common mistakes to avoid when building a catamaran:

One of the most common mistakes is not properly planning and designing your catamaran. This can lead to problems later on in the construction process, such as not having enough room for your intended use or not being able to fit certain components. It is important to take the time to carefully plan and design your catamaran, taking into account your needs, goals and the materials you will be using.

Another common mistake is not properly preparing your materials. This can include not properly storing or protecting the materials from the elements, or not properly cutting or shaping the materials before assembly. Proper preparation of materials is essential to ensure that your catamaran is strong and durable.

A third mistake is not using the right tools or not using them properly. This can lead to problems such as not being able to cut or shape the materials correctly, or not being able to assemble the boat properly. It’s important to research and invest in the right tools for the job, and to learn how to use them properly before starting the construction process.

Another common mistake is not properly securing and aligning the components during assembly. This can lead to problems such as leaks, or the boat being unstable on the water. It’s important to take your time and to work carefully to ensure that everything is properly aligned and secured.

Finally, not following safety guidelines is a mistake that should be avoided. This can include not wearing protective gear, not having proper ventilation, or not taking the necessary precautions to protect yourself and others. Building a catamaran can be a challenging process, but it’s important to prioritize safety to prevent accidents or injuries.

After completing the construction of your catamaran, there are several important steps to take before launching it. These include finishing the exterior and interior of the boat, and performing necessary safety checks.

Finishing and Launching Your Catamaran

Finishing the exterior of your catamaran involves tasks such as painting, varnishing, or applying gel coat. This step is important to protect the boat from the elements and give it a professional look. It’s important to use the right type of paint or finish for the materials you used in the construction, and to follow the manufacturer’s instructions.

Similarly, finishing the interior of your catamaran involves tasks such as installing cabinetry, flooring, and other finishing touches. This step is important to make the boat more comfortable and functional. You can add amenities such as a kitchen, a bathroom, and a sleeping area.

After the finishing is done, it’s important to perform safety checks on your catamaran before launching. This includes checking the boat’s systems such as electrical, plumbing, and navigation. You should also check that all the safety equipment is in place and working properly. This includes life jackets, flares, and fire extinguishers.

Once all the necessary steps are completed, you will be ready to launch your catamaran. Launching a catamaran is a complex process that requires coordination between the boat owner, the marina, and other professionals. The boat should be launched in a protected area with calm waters, and with the help of a crane or a trailer. It’s important to have a plan in place for launching and to be aware of the local laws and regulations.

Finally, after the catamaran is launched, it’s important to test the boat and make any necessary adjustments before taking it out on the water. This includes testing the systems, checking for leaks and making sure that the boat is stable on the water. After this, you can finally enjoy your new catamaran!

Leave a Comment Cancel Reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Time For a Catamaran Adventure

Isn't Time For Yours?

Building Your Own Catamaran

Building your own catamaran is another option to getting into your own boat. In this page we will go over the advantages, considerations, and a detailed history and journal of our boat-building adventure with Light Wave . We hope this will give you a clear picture of what lies ahead if you go this route, including:

• Construction methods
• 9 essential design features
• Review of the four leading catamaran designers for home builders
• Construction times
• Budget: How much did it cost to build a basic cruising catamaran?
• Layout of our catamaran, LightWave , and lots of pictures
• Carllie’s article from September 2000 Multihulls Magazine: “The Boat Builder’s Wife “
• Equipment outfitting
• Radio and communication outfitting
• Dinghy selection and considerations
• Having a boat custom-built for you

Because of the huge dollars needed to buy a new or even a used catamaran, we would never have gotten a catamaran if we hadn’t built it ourselves.

Let’s start by saying that building any type of larger boat, especially a catamaran, can be one of the most intellectually and physically challenging things you will ever do.

It has been said that building a large boat is the closest a man can come to giving birth to a baby. In other words there is going to some discomfort and pain along the way; you will question yourself on whether this was such a good idea; it’s very difficult to reverse the decision; and though friends will support you, you will be on your own most of the time with your significant other if he/she is game.

Know your boat

You will intimately know every part of your boat. You will know where every wire, hose, bolt, bulkhead, rib, and support is because you installed them!

Pride of ownership

We have often thought what it would be like to just buy a boat from a manufacturer, and know that while owners who have spent a lot of cash (or future life to pay off the lien) their often possessive and competing-with-the Joneses could not begin to compare to our quiet glow of happiness and akinship we feel with Light Wave .

Our boat is like part of the family. So much time was spent on her that we have a major emotional investment. Every time we see our vessel – from a distance at anchor or approaching her in our marina, we say, “What a pretty boat! I can’t believe we built it!” Then that sense of accomplishment settles back in and we feel we have indeed earned the privilege of all of the beautiful experiences we have had sailing, cruising, exploring the beautiful BC Coast and much further a field (or should we say “an ocean”?).

You will be able to pay for the materials as you go and “donate” your time to the cause.

Get a newer design

Many of the production boats that are out there are designs of many years ago because the manufactures have to recoup their capital investment on the mold and production setup. When you build your own you have much newer designs to draw from.

Details on Our Boat Building Adventure

We had sailed our first boat Wave Dancer for five years and had many adventures on the British Columbia coast. In May 1996, I had just returned from a little one-week solo trip in the Gulf Islands of BC when I bought the book, The Cruising Multihull by Chris White (Future link to book review on our web site).

This is the book that got me going (Carllie was not yet convinced). I must have read it a half dozen times over the next 6 months, each time becoming more convinced that this was the way to go for our next boat. It was really still pre-internet web site days so I wrote to all the designers that were listed in the back of the book. Over the next several weeks packages of information started appearing in the mailbox (there is just something about getting packages in the mail – I guess it’s the anticipation). I would pour over these preliminary printed pages with pictures and accommodation layouts. Next, I put a few dollars down to buy the information packages and study plans from the top prospects.

I waited patiently for the study plans. It was like the night before Christmas when I was kid. Oooh the wait! Finally they came, and again I carefully scrutinized the next level of detail. Things were getting a little more serious. The top contenders were:

• Richard Woods
• Chris White
• James Wharram

Click here to read my comments and reviews on their catamaran designs as well as those of Jeff Schionning.

I remember initially drooling over the Atlantic 42 by Chris White, still one of my favorite designs. It seemed to be so seaworthy (by the way if I run into about $800,000 USD any time soon, I am going to buy an Atlantic 55). The most important piece of advice that came out of the material was from Richard Woods:

“Build the smallest boat you‘d be happy with it.”

Axiom #1: The hours to build a catamaran is in almost in direct proportion to its weight.

Which brings us to Axiom #2:

Axiom #2: It takes about 1 hour to create 1 pound of finished boat.

In our case we spent 3,500 hours ( click here for full details on the construction hours ) to build a 4,000 lb. boat (just a little less than 0.9 hours per pound). If a boat’s empty weight is 8,000 lbs., it will probably take about 6,000 hours to build.

When you think about it, you can only mix and handle so much material per hour. More boat weight, more material, more hours. Sure there are some economies of scale on a bigger boat, but usually the systems become more complex and these take longer to install.

This decision process took 8 months and I figured we’d launch in 6 months. It was now January of 1997. Little did we know it would be 26 months and 3,500 hours between the two of us until we launched on June 5, 1999. We ordered the full plans and we were off and running.

We were ready to build, but where would we start the process? First of all, we live in a tiny 480 sq. ft. apartment in Vancouver. Back-yard building wasn’t exactly an option so I found a small garage nearby that we rented for 5 months.

After about 4 months in the garage, I had made all the small parts and it was time to build the hulls. This meant that we had to go larger facilities. We found space at Shelter Island Marina and Boatyard in Richmond. This is the biggest boat yard in the Vancouver area with dozens of commercial and private projects, big and small, under way.

We were out of money by then, so we sold our first boat so we could buy resin and fiberglass. It was a traumatic time as we said goodbye to our beloved Wave Dancer . We were now committed. We than had all the foam for the hull cores, barrels of resin, and huge rolls of matting and roving needed for the fiberglass skins delivered to our “domed stadium”. We kicked ourselves many times that we didn’t take a picture of this raw material stacked in one corner of the empty shed, so we could later show “before” and “after” photos. It was time to build the hulls.

Over the next several months we proceed to join the hulls with the beams I had built in the garage, and then to install the cuddy cabin, cockpit, and decks. By the spring of 1998, it was staring to look like a catamaran. Through the spring and summer of 1998, we continued with the major structural components: mini-keels, hatches, stairs, and interior. Then we went on to the very laborious work of fairing the boat before painting. Don’t under estimate that job!

By October 1998 we were ready to prime the boat and start painting. I really thought this would go quickly. I forgot that I would have to do two more complete sandings to sand off and finish the two layers of primer application. In addition we had to fill countless pinholes – a laborious process somewhat like hiking up a mountain – each time you get to what you think is the top, you see another summit!

The boat seemed to get bigger and bigger. Believe me, there is a lot of surface area on a catamaran. I clearly remember that last sanding: I had reached the end of my physical and mental endurance – I was exhausted. I was ready to move on to the next phase – any phase but more sanding!

We now started spray-painting the hulls bright yellow. It was around this time we decided on our boat name of Light Wave . The painting took over a month: the hulls being the easy part, it was the topsides, the nonskid, and all the masking and prep that seemed to take forever. Happily, the worst of the dust was gone.

By March 1999 we were in the home stretch. The center bridge deck cabin was completed so we took a week off from our paid jobs and lived on the boat in the shed so we could work all day and not waste time commuting. March, April and May were frantic months as we finished all the final touches: engine installation, rudders, windows, deck fittings, electrical, plumbing, mast, and rigging. See our outfitting page (for more details on what we picked and why, and things we would do differently now.

Initially, our electronic systems were relatively basic but included GPS and autopilot see the following link for all our electronic outfitting choices and reasoning for more details.

It was May 22, 1999 and we decided that Saturday, June 5th would be “Launch Day” so we could send invitations to all of our friends. On the Friday night before Launch Day, we still had a number of final things to do, many of them outside. Unfortunately it was pouring rain. We were tired and very wet but the boat had to go into the water next day so we persevered on till everything was ready.

The moment of truth came as Light Wave was lowered into the water. While still in the slings of the Travelift, I jumped aboard to check for leaks. Of course there weren’t any! More food and laughs and tours of the boat for all attending. It was a great day.

Emotionally drained that night, we slept in Light Wave in the water for the first time. It was another week before we actually went out for our first trip as we had to sell the shed, setup sails, and install some final deck hardware.

To sum it up, building a catamaran was a great experience. We learned a lot. Carllie and I grew closer together through it all. We had a great time doing it. We had a beautiful catamaran to show for it. Now it was time for a catamaran adventure !

James Wharram Designs

Search Our Site

• Self Build Boats
• Professionally Built Boats
• Choosing a Boat
• How We Design
• Photo Gallery
• Video Gallery
• Articles & Blogs
• Wharram World
• Boat Building Plans

Wharram Shop

• Study Plans
• Merchandise
• Papers and Articles
• Limited Edition

Complete, clear and detailed plans to build your own Wharram Catamaran, that have often been described as a 'course in boat building'. All Wharram building plans are drawn for the first time builder, so anyone with a modicum of practical ability can build one of our designs. Wharram designs are all based on decades of actual building and sailing experience of the boats, so you can be confident in its sailing capabilities and safety.

How To Create the Perfect Cruising Catamaran Layout

As an Amazon Associate, we earn from qualifying purchases. We may also earn commissions if you purchase products from other retailers after clicking on a link from our site.

More than ever before, sailing fans are gaining an interest in catamaran layouts and designs that define performance. Many others are also looking into either buying a cruising catamaran or designing and building one. While building a catamaran is no piece of cake, this article shows you how to create the perfect cruising catamaran layout. 

To create the perfect catamaran layout, carefully consider factors like a good hull design, optimal helm station placement, boat stability, and adequate load-carrying capacity. Excellent galley positioning, ease of handling, and spacious living and sleeping quarters are also crucial. 

The modern cruising catamaran is a far cry from the simple Polynesian double canoe of old. That’s because structural innovations and new composite materials have resulted in multihulls with impressive cruising abilities. Keep reading to learn more about exceptional catamaran layouts.  

The Changing Trends in Catamaran Designs

The early cruising catamaran designs resulted in boats that could sail much faster than traditional sailing boats. In addition, they could glide with ease in shallow waters and required less wind and crew. Unfortunately, these cruising cats were heavy, had small, cramped interiors, and boasted somewhat challenging handling abilities. 

Today’s cruising catamarans are different. They boast the utmost comfort, high speeds, and the safety of a well-designed cruising yacht. They are also more exciting, visually appealing, deliver the smoothest of rides, and sport more spacious interiors. 

Have a look at the below video showcasing the top ten cruising catamarans:

Features To Look Out for in Catamaran Design Layouts

Cruising catamaran designers understand what most sailors look for in a cruising vessel. They, therefore, design cruising multihulls that address these pertinent issues and more. Some of the features you might want to consider having in your dream boat include the following:

• Responsive performance. Outstanding performance allows for pleasurable cruising and ensures your safety since you have more options during difficult weather.
• Excellent load-carrying ability . This allows you to have an extended cruising vacation or ocean crossing.
• Boat stability . Go for lightweight, robust construction, which results in a lot of buoyancy.
• A low center of gravity for smooth rides and enhanced performance. Centering weight around a low center of gravity improves the overall sailing quality, reduces pitching movement and reduces the risk of capsizing .
• Adequate bridgedeck clearance to reduce slamming and provide better performance in rough conditions. A high bridgedeck also means less noise and slapping action from the waves hitting the boat bottom, thus ensuring a quieter, smoother ride.
• Comfortable sailing. To enjoy a quality life on board, you need comfort while at sea. Thus, elements like gentle movement, no creaks or groans, no bridgedeck slamming, and minimal pitching are essential for quality, peaceful and restful sleep.  

Now that you know what a cutting-edge catamaran features, let’s look at how to create the perfect cruising catamaran layout.  

Build a Larger-Sized Catamaran

The early catamarans ranged between 36-42 feet (10.9-12.8m). At the time, this appeared to be a good size in terms of safety and ease of handling. However, the boats were heavy, and the additional drag and displacement adversely affected their performance and windward ability. 

It’s now possible to make the new generation catamarans lighter, larger, and more spacious with excellent power-to-weight features. The current trend is larger-sized catamarans in the 45-50 feet (13.7- 15.2) range. Composite engineering and technologically advanced equipment such as furling systems, electric winches, and autopilot make it easier for a smaller crew to sail larger boats with confidence. And to do so without compromising safety or stability. 

Get the Best Catamaran Hull Design

A cruising catamaran’s performance depends on three main aspects; its length, the sail area, and the boat’s weight. Long boats are generally fast. A light boat with more sail area is also faster than a heavier boat with less sail area. In other words, you can make a multihull faster by making it longer, lighter, or adding more sail.

However, there are exceptions to this rule; a boat with too much sail area is more likely to capsize if there are brisk winds. Also, if the boat’s design makes it too light, it’ll be unable to handle much punishment, while a hull design that’s too slim would make the vessel incapable of carrying any significant loads. But that’s not all; if the boat is too long or too large, it’ll become grossly exorbitant. Narrow hull shape might also mean smaller cabins.

Nonetheless, these three factors alone are not enough to determine a cruising catamaran’s performance. While faster boats boast finer hulls, the wetted surface area tends to increase as fineness increases; thus, fine hulls end up becoming less fast in low wind speeds. Also, very wide hulls mean a reduction in actual performance.

The Prismatic Coefficient (Cp), a measure of how full the ends of the hull get, is the most essential design hull shape factor for any catamaran. A high Cp equals high speeds, although you can still use a lower Cp if you have fine hulls. Nevertheless, the key to a good Catamaran design is a higher Cp for fast sailing. 

To achieve a high Cp, there are several things you can do: 

• Fit bulb bows . Unfortunately, the bulb bows tend to slam in a seaway when you do this.
• Have an extensive planning aft section . However, this can increase the wetted surface area, WSA and lead to additional challenges. 
• Flatten out the hull rocker and add a bustle aft. This helps to add displacement aft. 

Build Convertible Main Living Spaces

The open cockpit is now a thing of the past. Instead, pioneering designers for catamaran manufacturers like Nautitech, Gunboat, and Catana now replace traditional-style salons, cockpits, and cabins with spacious indoor and outdoor living spaces. The concept involves merging separate saloon and cockpit areas with duplicate lounge spaces and the use of hard-wearing composite materials. 

You can also design the cabin to suit your preferences. You may decide to add a cabin or remove one, add a bathroom, have the forward berth in the hull or on the wing deck.

• The design enhancements boost usable space while opening up the living areas.
• It reduces time and costs for interior maintenance and cleaning. 
• Large windows bring in more light, increasing visibility. 
• Luxurious, spacious, and airy owners’ cabins provide more comfortable living space. 

Bulkhead Helm Stations vs. Twin Stern Steering

Many catamaran owners have traditionally preferred bulkhead steering. This helm position remains popular, but twin stern steering positions come with more advantages since they provide greater sails visibility. The twin stern positions are also best suited for racing or day sailing since they often lack adequate protection for extended cruising. 

Exposed helms are not ideal for a long ocean passage. Go for a safe, secure, and well-protected helm station that provides good visibility and comfortable space for long watches. Again, it’s best to have all control lines at the helm to establish a static control station. Also, have all push-button-controlled winches, instruments, windlass, and autopilot prominently located inside the cockpit. 

• Twin stern steering positions give you a better view of the sails
• You get a better feel for overall sailing conditions.
• Twin stern steering positions lack the necessary protection for extended cruising. 

Go for the Flybridge Design

The flybridge design is appealing because it offers excellent visibility, more comfort, and additional entertainment and lounging space for everyone on board. Unfortunately for smaller boats – those below 50 feet (15.24m), there is minimal protection from the elements. As such, you might want to consider adding enclosures to offer protection. The flybridge, thus the helm, remains cut off from the vessel, which makes communicating with the crew a challenge. 

• It provides great visibility.
• It offers comfortable spacing. 
• It might be unsafe to move from the cockpit to the flybridge in bad weather.
• It isn’t easy to communicate with the crew.

Daggerboards vs. Fixed Keels

Average cruising catamarans typically utilize fixed keels while high-performance cats have daggerboards . Fixed keels allow you to beach your catamaran easily, and your hull remains intact if a collision occurs. While you lose some angle when sailing upwind, you gain more interior space in the hulls that you can put to good use.

Daggerboards are essential in a performance cruising catamaran since they guarantee that the boat delivers good upwind sailing, including during difficult situations. During long passages, they allow you to point better upwind though the drawback is that they consume much interior space within the cruising catamaran’s hulls.

Since flying on foils ( hydrofoils ) isn’t that practical on cruising catamarans, designers of larger-sized boats have also come up with modified daggerboards. These daggerboards produce lift and prevent leeway, too, thereby improving performance significantly, as seen with the Catana 59’s curved daggerboards. These foil-like daggerboards lift the boat ever so slightly upon reaching higher speeds, making it feel less heavy and much faster. 

At the end of the day, calculating the performance of a boat sailing in a wide range of varying seas and winds might not be easy – despite a daggerboard or fixed keel configuration. This is because upwind speed depends not only on the sails’ quality but also windage and the height of the bridgedeck beyond the water.

• The design innovations -curved daggerboards and hydrofoils- improve catamaran performance significantly.
• Daggerboards enable you to access otherwise inaccessible anchorages.
• Daggerboards take up hull space in the hulls of your vessel.

Galley Up vs. Galley Down

Galley layout are becoming more and more important as more people, including families, start sailing regularly. While at sea, your galley needs to be a safe place, well-ventilated, and functional. Everything should be well-thought-out for the sailor’s comfort, including handholds to make it safer to move around the boat. 

While the galley location can either be up the bridgedeck or down in the hull, galley up appears to be the most popular trend. This makes the galley the focal point of both the living space and entertainment areas.

If you have a family, this placement is ideal since you make your meals from the galley and get to spend most of your time here. Many cruising families and couples prefer this arrangement and find separating the galley down the hull unappealing. Besides, carrying hot food up and down the staircase is unsafe.

Still, galley down is ideal for charter boats since it offers a private cooking area and uses up hull space efficiently.  

• Having the galley on the bridgedeck is ideal for families and cruising couples.
• Placing the galley on a similar level with the serving area and cockpit is safer and less tiring.
• There’s better ventilation on the bridgedeck, making for comfortable cooking. 
• There’s less kitchen privacy galley up.
• On smaller catamarans, this layout can impact the size of the saloon seating area significantly.

Production Catamaran vs. Custom

The choice of either a production catamaran or a custom design might seem pretty straightforward. Production catamarans from major brands come backed by proven designs, dependable construction, solid warranties, and many years of experience. The catamarans are easy to service, source for parts, and most – particularly the owner’s versions – hold on to their value, making them much easier to resell. 

On their part, custom boats are fantastic in that you can tailor them to your exact needs. However, they might be more challenging to maintain or service. That’s because of parts unavailability and lack of construction knowledge.

Choose Quality Construction Materials

The best quality materials to use on your catamaran are both light and robust. While carbon fiber is great, plywood, plywood/epoxy, and strip-cedar are excellent materials too. What’s more, they are also affordable, so you don’t have to get too hung up on cutting-edge building materials. What matters is build quality; thus, a well-built plywood catamaran boat can last as long as a boat made from more high-tech materials. 

Combining various materials also helps combat some of the issues that plague plywood boats in terms of resale value. At times, the design tends to make the boats appear pretty dated.  

• Plywood and strip-cedar materials are affordable and provide excellent build quality. 
• Plywood boats may have a lower resale value than those built with modern materials.

Consider Ease of Handling

An important factor in handling a cruising catamaran is deck layout. Most cruising catamarans sailed short-handed , so if your boat has one helm, all lines should run back here to allow for a static control station for the entire boat. 

The other essential element is visibility from the helm. The 360 degrees of visibility while maneuvering, docking, or underway is crucial to your boat’s safety, as well as life and property. As such, you should be able to view both bows, or at least the pulpits and sterns, while standing at the helm. If not, you may have challenges handling the boat due to blind spots.

Consider the Load Carrying Capacity

A well-designed catamaran is enjoyable to sail in all weather conditions. It’s also much easier to handle than a monohull because of its widely spaced twin engines. But when you immerse extra hull depth, the vessel gets sluggish and moves slower, maneuvering in tight spots or when docking becomes more challenging. Furthermore, the hull submersion reduces bridge deck clearance, leading to hull slamming. 

To allow for adequate load carrying capacity, you need a design that provides a generous displacement. This helps to ensure that you maintain reasonable bridge deck clearance even when fully loaded. It also allows you to avoid digging big holes in the water as you drag your transoms. 

Displacement refers to the amount of buoyancy designed into the hulls, which essentially means that your boat will cruise better if its weight is less than your designed displacement.

Note that an overloaded catamaran not only loses out on performance but eventually, on safety too. To counter this, choose a lightweight catamaran with hulls bearing cored construction and interiors made of lightweight materials.  

Remember, when you go cruising, you will need to carry fuel, extra water, supplies, equipment, and amenities, translating into thousands of extra pounds. Therefore, try and avoid the following design errors to ensure that your catamaran has an adequate load-carrying capacity:

• Avoid putting in place too much accommodation space.
• Avoid building a heavy boat ‐ use low-tech construction materials.
• Avoid installing inboards in a small boat.
• Lightly constructed catamarans perform faster and carry more weight.
• Cored construction makes for a strong and stiff catamaran, thus enabling good performance.

Final Thoughts

A well-designed cruising catamaran is a joy to behold. Today’s modern technological advancements mean that you can buy or build a light but strong cruising catamaran. And as you can see from this article, there are many excellent cruising catamaran layouts that you can choose from. 

However, whichever layout you decide on needs to fit your sailing needs and purposes to ensure you remain comfortable and safe while at sea. Above all, ensure that you go for a vessel that you can handle with ease in all weather conditions.

Owner of CatamaranFreedom.com. A minimalist that has lived in a caravan in Sweden, 35ft Monohull in the Bahamas, and right now in his self-built Van. He just started the next adventure, to circumnavigate the world on a Catamaran!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name and email in this browser for the next time I comment.

Recent Posts

Must-Have Boat Gear for Catamaran Sailors!

Sailing is probably the most gear-intensive activity I've ever done; there are so many decisions to be made about what gear to buy now, for tomorrow, and what to definitely never buy. The gear on...

6 Best Trailerable Trimarans For Bluewater and Coastal Sailing

Having a boat costs a lot of money, even when you are not using it, marina fees, etc. And once it is in the water most sailors never go very far from their "home marina" and sailing will be somewhat...

• BUILDING RAKU FROM A KIT
• Duflex Kit Construction in 9 Steps

BUILD YOUR RAKU CAT WITH A DuFLEX KIT BY FOLLOWING THESE NINE BASIC STEPS

Step 1. Kit Design

Work with us to finalise the details of the design you have chosen including any design options or additional modules to be included in the kit.

We will determine the laminates, the number of panels required for each laminate, create the cutting files and prepare a quote for the kit if it is not already priced.

Once the design details and pricing are confirmed you are ready to place your order.

Step 2. Unpacking

2. The kit arrives at your workshop door, usually by container, as a stack of 1.2m x 2.4m routed composite panels ready to be joined. The shipment will normally include additional reinforcements, resins, and ancilary products as specified.

Unpack the shipment and stack the panels out of the way of the space where the panels will be joined.

If you have purchased a joined kit many of the panels will already be joined up to the length that can be shipped in a container (12m).

Step 3 Joining the Panels

Set up the work space where the panels are to be joined.

The panels have a scarf join called a Z join that facilitate the join without needing tapes.

The joining can be done with a heated Z press that cures the epoxy join quickly. Alternatively they can be joined with clamping pressure.

If the panel are are being joined with the Z press you will need an elevated work bench the full length of the longest panels you are using. (image below).

If you are joining them with a clamping technique the space can be on the factory floor.

A nesting booklet is provided with the kit to show how the panels are joined (right)

Joining the panels with  clamping pressure

Panels are being joined into a single long panel by painting the surfaces of the scarf join with epoxy screwing through plywood battens that have a release film applied to one side.

Joining the panels with the Z Press

Step 4 Stacking Joined Panels

Once the joins are cured the panels are stacked to one side until they are needed for the job. The inividual parts should not be cut free of the panels until they are required.

Bulkhead and floor panels will be needed before the hull sides and cabin top so they should be left to the front of the stack wherever possible.

Step 5. Separating the Parts

When assembly is ready to begin the individual parts are separated from the panels by cutting the joining tabs. It is likely you will be building onto moulded hull bottoms that have been built from strip planking or another method of building moulded components. The process for building moulded components is described in another article.

Step 6. ASSEMBLY

As the joined panels are assembled onto the job you will need to apply glass tapes to the joins as specified in your plans.

Panels can be surfaced and coated inside and out with high build while they are on the workshop floor to minimise fairing time once they are assembled to the boat. The paint on the panels shown here has been kept back from the edges to provide a good bond for the tapes.

Smaller items such as steps, seats and dagger cases are nested into the kit and for the more complex parts diagrams are provided to assist with the assembly process.

Step 7. Interior

Interior kits can be ordered with the primary kit, or they can be ordered later when final decisions have been made about the interior arrangement.

A compromise solution is to order the interior as a set of plain planels that can be cut to shape on site after finalising the layout.

Step 8 Fairing, Painting, Hardware Installation

8. The DuFLEX construction process goes a long way to minising the amount of fairing that has to be done, but inevitably any boat that has not come out of a female mould will require some level of fairing and surface preparation prior to painting. 

The fillers and resin systems required for the fairing work are normally supplied as part of the kit.

Hardware installation is the same as for any other form of construction using high density core inserts or consolidated laminate in way of fittings.

Step 9. Sailing

Go Sailing. This Barefoot 40 Catamaran was built entirely with a Duflex kit in Foam/Glass and Epoxy resin systems from ATL Composites

DuFLEX Kits are manufactured and supplied world wide by ATL Composites

atlcomposites.com.au

And in Europe by VDL Composites

www.vonderlinden.de/her/28/vdL-Composites-GmbH

For more information on DuFLEX and associated Products 

atlcomposites.com.au/category/27/DuFLEX

Join the Newsletter

• Scroll to top

[email protected]

The Best Advanced Build System in the World

The schionning advanced build system are one of the simplest ways to build your own boat, or have a custom design built faster and more accurately by a professional. utilising duflex panels with a balsa core, large sheets are joined on their long edge to form full length hull panels, bulkheads etc similar to a giant jigsaw puzzle. once you release the tabs, your full size pieces are ready to be assembled., a pre-cut advanced build system does not only benefit the home builder, but streamlines a professional build as quantities are accurate and wastage is minimised. when having a vessel built overseas, a kit reduces the chances of local materials not being available, or delays during your project, and ensures there are no mistakes., read on below to gain a more solid understand of how the schionning advanced build system go together, where are you building.

Schionning Designs is partnered with a number of leading composite manufacturing companies with varying CNC capabilities, as well as supplying resins, hardeners, cloths and fillers. Our partners are located in different parts of the world, so where you are planning to build your boat will have an impact on which composite company is best to supply your kit.

Listed below are our composite manufacturering partners, ATL Composites located in Australia, VDL Composites located in Germany, and PBT Technologies located in South Africa.

ATL Composites (Australia)

VDL Composites (Germany)

PBT Composites  (South Africa)

Starting the process.

THE KIT PROCESS

MATERIAL CHOICES

TECHNICAL INFORMATION

RECOMMENDED EQUIPMENT

• Where do I start?
• Catamaran Designers
• Bridgedecks & Turret
• Cockpit & Steering
• Hulls, Frames, Plinths & Anchor
• Top Coat
• Winches and Mast
• Our Books
• Our Videos
• Terms of Use
• Contact Us

building a catamaran

A collection of sailing catamaran building logs, from sailboat plans to yacht launch. This 11.6m 'EASY Series' catamaran, joining other catamarans to lat and longs unknown...join us on our journey

Scroll down this page to read more...

Plywood and Epoxy Catamaran

This 'glass-over-ply' sailboat is proof that a DIY'er can successfully build an ocean-going multihull. Plywood construction is the cheapest building method available and very forgiving while one hones their skills. Finishing with a solid fiberglass outer is also a task made easier, given the amount of glassing and gluing needed during such a project.

It will soon become evident that parting with a few dollars provides a strong foundation for your catamaran building decisions. Having reliable Boatbuilding Resource Books , WILL HELP fast track your decisions prior to, during and post building.

We also wanted a light sailing catamaran that we could beach with ease. This now allows us to save money on one of the biggest maintenance DIY chores, sailboat antifouling without having the costly expense of slipway fees.

Keep scrolling...

how to build a boat.

"it takes a strong desire and a will to achieve. building a large catamaran is achievable".

Our build in 3-minutes

Many sailboat plans to choose from.

Is it cheaper to build or buy.

There are many yacht plans to choose from, but dont kid yourself. Many have tried to do it on the cheap and their result shows.

If there was a cheaper way, the sailboat designers would tell you. Afterall, they would use that reason to sell there plans!

If you want a yacht with all 'bells and whistles', keep working because it does cost money.

Enough waffle, jump into the website and have fun

Catamaran Sailing

DIY boat projects on Pure Majek from new navigation equipment, anchoring systems, rewiring yacht electronics diagrams, AIS and much more. We carry updates and rate products such as antifoul, solar fans and even galley items.

Its been ten great years since launch and we look at things that have worked and those we would change.

Join us and be inspired.

Welcome to sailboat planning and building.

Setting achievable goals and how to stick to them. From the planning process, what and why we did many things, importantly, things we would do differently. The following pages draw on these experiences described in far more detail in our book 'A Sailing Catamaran Building Adventure'

Important Information Terms of Use located in 'ABOUT US'

© 2024 www.diycatamaran.com All Rights Reserved

• Testimonials

P: (+61) 02 4981 8288  

Disclaimer  Copyright © 2013 Spirited Designs. All Rights Reserved.

The Ultimate Guide to Choosing Between a Sailboat or Catamaran for Your Sailing Adventures

C hoosing between a sailboat and a catamaran for your sailing adventures is a significant decision that depends on various factors, including your sailing preferences, experience level, budget, and intended use. Here's an ultimate guide to help you make an informed decision:

1. Sailing Experience:

• Sailboats: Typically require more skill and experience to handle, especially in adverse weather conditions. Ideal for sailors who enjoy the traditional feel of sailing and are willing to invest time in learning and mastering the art.
• Catamarans: Easier to handle, making them suitable for beginners. The dual-hull design provides stability, reducing the learning curve for those new to sailing.

2. Space and Comfort:

• Sailboats: Generally have a narrower beam and less living space. However, some sailboats may offer comfortable cabins and amenities.
• Catamarans: Wider beam creates more living space. Catamarans often have multiple cabins, spacious saloons, and expansive deck areas, providing a more comfortable living experience.

3. Stability:

• Sailboats: Monohulls can heel (lean) while sailing, which some sailors enjoy for the thrill but can be discomforting for others.
• Catamarans: Greater stability due to the dual hulls, providing a more level sailing experience. Reduced heeling makes catamarans suitable for those prone to seasickness.

4. Performance:

• Sailboats: Known for their upwind performance and ability to sail close to the wind. Some sailors appreciate the challenge of optimizing sail trim for efficiency.
• Catamarans: Faster on a reach and downwind due to their wide beam. However, they may not point as high into the wind as monohulls.
• Sailboats: Typically have a deeper draft, limiting access to shallow anchorages and requiring deeper marina berths.
• Catamarans: Shallow draft allows access to shallower waters and secluded anchorages, providing more flexibility in cruising destinations.
• Sailboats: Generally more affordable upfront, with a wide range of options available to fit different budgets.
• Catamarans: Often more expensive upfront due to their size and design. However, maintenance costs may be comparable or even lower in some cases.

7. Mooring and Docking:

• Sailboats: Easier to find slips and moorings in marinas designed for monohulls.
• Catamarans: Require wider slips and may have limited availability in certain marinas, especially in crowded anchorages.

8. Intended Use:

• Sailboats: Ideal for traditional sailors who enjoy the art of sailing, racing enthusiasts, or those on a tighter budget.
• Catamarans: Suited for those prioritizing comfort, stability, and spacious living areas, especially for long-term cruising and chartering.

9. Resale Value:

• Sailboats: Generally have a more established resale market, with a wider range of buyers.
• Catamarans: Growing in popularity, and well-maintained catamarans often retain their value.

10. Personal Preference:

• Consider your personal preferences, the type of sailing you plan to do, and the kind of lifestyle you want aboard your vessel.

In conclusion, both sailboats and catamarans have their advantages and disadvantages. Your decision should be based on your individual preferences, experience level, budget, and intended use. If possible, charter both types of vessels to experience firsthand how they handle and to help make a more informed decision based on your own preferences and needs.

The post The Ultimate Guide to Choosing Between a Sailboat or Catamaran for Your Sailing Adventures appeared first on Things That Make People Go Aww .